Hi Guys,
We are facing a problem to connectl MSA 2312sa to server HP DL380 G6 with ESXI 4.1.
the main problem, I think, is coming from HBA adapter detection.
In the status menu , under Storage it's showing :
Controler 0 (SAS3801E) Normal as status
Controler 1 (SAS3801E) Normal as status
In the storage Adapters menu :
LSI1068E
vmhba2
vmhba3
when I click on vmhba2 nothing is display
I cannot find WWN number to configure the host on the MSA.
Please help
Welcome to the Forums - How do you have you ESX server connected to you storage? If through a Fiber Channel switch is everything zoned correctly - the WWN should be founf on the storage adapter portion of the configuration tabe of the vsphere client - can you attach a screen shot of that
If you find this or any other answer useful please consider awarding points by marking the answer correct or helpful
Thank You for answer,
If I connect the MSa to the server ( we have two adapters HBA for redundancy) , the server will hung up on the following message :
Multiextent load succefully .
if we disconnect the MSA or disable HBA adapter on BIOS the server will restart normally.
we didn't configure any host on the MSA , we need to find out WWN/IQ to add the host.