<!
Hi all,
looking for help to script the following
port-group config using the vcli
one vswitch with two pnics -
vmnic4, vmnic5.
two kernal port groups iSCSI vlan 4000 and
NFS vlan 4001
port-group iSCSI - vmnic4
active, vmnic5standby
port -group NFS - vmnic4 standby and vmnic5 active
I can not find a away to script this using
Vcli.
You can set the standby/active at the vswitch level but not at the port-group level.
Message was edited by: richardt