Anyone who could help me to give the command on how to uplink a nic..thanks in advance!:D
If you mean to link a physical nic to a virtual switch the command is
esxcfg-vswitch --link=nic# vSwitch#
where # is the number of your pnic (vmnic0,vmnic1, etc.) and number of your vswitch you wish to link with.
Try this:
Ex: to link vmnic1 to vswitch0
esxcfg-vswitch –L vmnic1 vSwitch0
Steve
Thanks guys for answering my questions..
Here's the problem that I'd encountered..
Name PCI Driver Link Speed Duplex Description
vmnic0 03:00:00 bnx2 Up 100Mbps Half Broadcom..
vmnic1 05:00:00 bnx2 down 100Mbps Half Broadcom..
vmnic2 0b:00:00 e1000 down 100Mbps Half Intel...
vmnic3 0b:00:01 e1000 down 100Mbps Half Intel...
how can I make it up the 3 links..
thanks!
If the link is down it will usually indicate a network issue and could be something as simple as the NIC ports not being plugged in. I would first check the cabling for these ports. Are the network cards set to auto negotiate and is the same true about the switch they are connected to? If you plug vmnic1 into the switch port where vmnic0 is currently plugged into, does that change the link status for vmnic1?
Hi dave! thanks for the reply..there's a problem with my cables.Now its already ok.
Thanks again!
Jerome, if you find answers helpful please reward points.
Steve