vCenter shows wrong/no health status informations

[AraCom]

Hello VMware,

we are currently using two Dell PowerEdge R730 as ESXi, each one with the following Specs:

192GB RAM

E5-2680 v4

5 x 400GB SSD

3 x 4TB SAS

BIOS: 2.6.0

iDRAC: 2.50.50.50 (Build 33)

ESXi650-Update01 + ESXi650-201712401-BG + ESXi650-201712408-BG

Since the last update we are getting wrong or no Data from the healthstatus:

Are we missing some drivers from Dell or something else?

Thanks for your help,

Best Regards

[RajeevVCP4]

You have all drives

        <Name>Disk Drive Bay 4 Signal Cable 0</Name>

        <ElementName>Disk Drive Bay 4 Signal Cable 0</ElementName>

        <Name>Disk Drive Bay 4 Power Cable 0</Name>

        <ElementName>Disk Drive Bay 4 Power Cable 0</ElementName>

        <Name>Disk Drive Bay 3 Signal Cable 0</Name>

        <ElementName>Disk Drive Bay 3 Signal Cable 0</ElementName>

        <Name>Disk Drive Bay 3 Power Cable 0</Name>

        <ElementName>Disk Drive Bay 3 Power Cable 0</ElementName>

        <Name>Disk Drive Bay 2 Signal Cable 0</Name>

        <ElementName>Disk Drive Bay 2 Signal Cable 0</ElementName>

        <Name>Disk Drive Bay 2 Power Cable 0</Name>

        <ElementName>Disk Drive Bay 2 Power Cable 0</ElementName>

        <Name>Disk Drive Bay 1 Signal Cable 0</Name>

        <ElementName>Disk Drive Bay 1 Signal Cable 0</ElementName>

        <Name>Disk Drive Bay 1 Power Cable 0</Name>

        <ElementName>Disk Drive Bay 1 Power Cable 0</ElementName>

        <Name>Disk Drive Bay 2 Cable SAS B2 0</Name>

        <ElementName>Disk Drive Bay 2 Cable SAS B2 0</ElementName>

        <Name>Disk Drive Bay 2 Cable SAS A2 0</Name>

        <ElementName>Disk Drive Bay 2 Cable SAS A2 0</ElementName>

        <Name>Disk Drive Bay 2 Cable SAS B1 0</Name>

        <ElementName>Disk Drive Bay 2 Cable SAS B1 0</ElementName>

        <Name>Disk Drive Bay 2 Cable SAS A1 0</Name>

        <ElementName>Disk Drive Bay 2 Cable SAS A1 0</ElementName>

        <Name>Disk Drive Bay 2 Cable SAS B0 0</Name>

        <ElementName>Disk Drive Bay 2 Cable SAS B0 0</ElementName>

        <Name>Disk Drive Bay 2 Cable SAS A0 0</Name>

        <ElementName>Disk Drive Bay 2 Cable SAS A0 0</ElementName>

[AraCom]

Hello RajeevVCP4

thanks for your reply. But we are missing somer other Data in the healthstatus, like all BIOS related sensors. Also we are getting temps of 150°C which is boiling hot. In iDRAC we can see the correct Data somehow.

Best Regards

[RajeevVCP4]

Then only hardware diagnostic utility can capture this issue