We have upgraded the vCenter in our test environment to 6.5U1g. The ESXi hosts are still on 5.5. Looking to upgrade the hosts to 6.5u1. What is the preferred method to do that (Update Manager, command line). Eventually in our production hosts, we will need to take the hosts down to patch firmware. Both of our test and work environments have the capability to do vmotion. Just want to simulate the process.
Thanks,
TT
First make firmware update.
To update hosts i prefer use of update manager, for being simpler.
Find if have one Custom Image for VMware ESXi to version your hardware.
Please consider marking this answer "correct" or "helpful" if you think your question have been answered correctly.
I just vmotioned all the guests off, put in maintenance mode and rebooted to the ISO and upgraded that way (very straightforward).
only issue I have encountered is some VIBs that need to be deleted.
Test farm was done last week.
Production farm(s) this week and next week (1 host from each farm this week, other two hosts on each farm next week)
DR farms(s) in two weeks time.
Rob
We probably put it in maintenance mode, then take it down to patch firmware, and install. At this moment, our hosts will get the 6.5U1 installation (hardware and backup software compatibility). So after the installation, are there any additional updates that need to be run (we are not interested in U2 due to the previously stated). If so, it will be un/scan from Update Manager?
We downloaded the standard ISO from VMware site with the ability to install/upgrade. Our hosts are Dell PowerEdge R820.
Thanks,
TT
Yes.
Before attach the baseline to one or more hosts.
Step by step:
How to patch ESXi with Update Manager
Please consider marking this answer "correct" or "helpful" if you think your question have been answered correctly.
How many hosts do you have? Depending on the number of hosts, it may be an option to upgrade the hosts from the command line using the offline/zip bundle..
In any case, I'd suggest you use the Dell customizes ESXi image, which contains additional drivers and tool for Dell hardware.
Here's the link to the A11 version of VMware ESXi 6.5 U1 | Dell US
André
A.P.,
We only have 5 hosts .
I have a question regarding EVC. I found an article about this.
Enable EVC on an Existing Cluster
2) "Power off all the virtual machines on the hosts with feature sets greater than the EVC mode" All my hosts have the same hardware and specs which should be ok? What I am asking is how do I determine the feature sets greater than the EVC mode?
I enabled it on my test environment and it validated successfully and all VMs online were not affected. Can somebody confirm that the VMs are not affected?
Thanks,
TT
Don't worry. enabling EVC will not affect powered on VMs, and the wizard will only allow you to select an EVC mode that's compatible with the hosts' CPUs, and the already powered on VMs in the cluster. What EVC does, is to ensure that VM's will be presented with a common CPU feature set when they are powered on.
The VMware HCL https://www.vmware.com/go/hcl seems to be currently not available, but unless I'm mistaken the EVC mode for R820 is Sandy Bridge.
So what I would proceed with the upgrade (assuming you don't have any individual drivers installed) is to upgrade/patch the hosts one after the other.
As a first step, upload the current offline bundle (VMware-VMvisor-Installer-6.5.0.update01-7967591.x86_64-DellEMC_Customized-A11.zip) to a shared datastore.
I also tend to set DRS to "Manual" druing the upgrades to control migrations.
Steps per host:
Once all of the hosts have been upgraded:
Note: To find out the profile name that's required for the update command, run esxcli software sources profile list -d /vmfs/volumes/<shared-datastore>/Patches/<zip-file>
André
... almost forgot. Things to do once the hosts have been upgraded.
André
A.P.,
Thanks for putting your time in. For the link you provided from the Dell site, is that for running an update? When I downloaded from the VMware site, it was specific for an upgrade or new install.
TT
Yes, the ISO image can be used for interactive installations as well as for upgrades, and the ZIP file can be used for updates/upgrades.
The images on the Dell site are based on the VMware images, but contain additional Dell specific drivers, and tools.
The steps I posted are the ones that I'm also usually using for upgrades in small customer environments.
André
Lets say once I have updated the host with the 6.5U1 using the ISO, would I need to use the Update Manager to scan for any new patches? Patches and extensions are not part of an update, ie U1, U2...? We are avoiding update 2 for now since Veeam doesn't support U2.
The image for which I've posted the link is ESXi 6.5 U1 (Build: 7967591), i.e. the latest build for Update 1.
Once installed, there's no need to install further patches through Update Manager.
André
Also, Veeam now supports U2 as well as 6.7 in the latest patch release 3a.
This sounds not relevant to this thread...but nice to know.
From OP:
We are avoiding update 2 for now since Veeam doesn't support U2.
I'm pointing out that this statement is no longer true, so, yes, it is relevant to this thread.