I have a vSPhere 4i server with 4 nics that I want to use for VLAN 110.
I configured one port on the Cisco 6509 Switch as trunked and added VLAN 110 to the port.
The problem is that I can only ping vm's on that VLAN if set the port group as VLAN 4095 (ALL).
If I switch the VLAN on the port group to 110 I can't communicate with any vm.
wreid.
Check if you declared a vlan 110 into the trunk of your switch.
a question. you have trunk native configured?
*If you found this information useful, please consider awarding points for "Correct" or "Helpful"*
In Switch Properties > Network Adpater you can see that a VLAN 110 is coming to the adapter ?
*If you found this information useful, please consider awarding points for "Correct" or "Helpful"*
No, but I can commnunicate with the server on that VLAN. See pic attached.
wreid.
Check if you declared a vlan 110 into the trunk of your switch.
a question. you have trunk native configured?
*If you found this information useful, please consider awarding points for "Correct" or "Helpful"*
thanks MauroBonder,
I figured it out, on the cisco 6509 you can only create truck ports on the supervisor. I need some GBics to do this.
thanks MauroBonder,
I figured it out, on the cisco 6509 you can only create trunk ports on the supervisor. I need some GBics to do this.
you can post here a show running-config of your switch ?
you tried test only with mode access vlan 110 ?!
one thing is correct, this vlan 110 not coming at network.
*If you found this information useful, please consider awarding points for "Correct" or "Helpful"*