Hello,
I am going to be using vCenter Converter Enterprise 4.2.1 to convert some VM's from Hyper-V to ESXi 4.1. Converter
has an option for Hyper-V and sees the VM's. Can these be converted powered on or off? Any gotcha's in this process?
Are you converting from Hyper V (2008) or Hyper-V 2.0 (2008 R2). If you are using Hyper-V (2008) then you want to remove your integration components prior to conversion. Depending on your OS, you may need to change your network driver. The only other requirements is to go into your VM once converted and remove any ghosted devices in DevMgr. You can do this by typing the following form a command prompt:
set devmgr_show_nonpresent_devices=1
start devmgmt.msc
Go to File menu, expand the View and select the Show Hidden Devices option.
Good luck. Ive done many P2Vs from Hyper-V with great success.
They can be converted powered on just like P2V. You might want to have a look at the Converter 5 beta. http://communities.vmware.com/community/vmtn/beta/public_converter_50?view=overview
Are you converting from Hyper V (2008) or Hyper-V 2.0 (2008 R2). If you are using Hyper-V (2008) then you want to remove your integration components prior to conversion. Depending on your OS, you may need to change your network driver. The only other requirements is to go into your VM once converted and remove any ghosted devices in DevMgr. You can do this by typing the following form a command prompt:
set devmgr_show_nonpresent_devices=1
start devmgmt.msc
Go to File menu, expand the View and select the Show Hidden Devices option.
Good luck. Ive done many P2Vs from Hyper-V with great success.
I would rather use Converter 5 than your outdated version
Have you seen any advantages using Converter 5 in relation to Hyper-V?
yep - cold imports worked flawless for me
I don't understand why you woudl say its outdated. I was able to do Hot migrations and not rely on cold migrations which sometimes fail with Hyper-V in the past. As long as you stop all services, which you can actually designate during the converter wizard, then you are fine. Ive actually had to go back to even older converters on some projects to be successful. Not saying Converter 5 isnt ok, but tried and true from VMware is always a safe bet.
Regards.
> but tried and true from VMware is always a safe bet.
IMHO Converter is always experimental.
At the moment I use 3.0.3 and 5 - I have no use case for 4.x at all