Hello experts,
I just migrated a VM from ESX4.0 to ESXi5.5 host, then upgrade VM Tools already.
But after that this VM can not connect to oura Local network.
Although, the network is configuration fine and configured on switch also.
Is these any problem related network configuration on new ESXi host?
Thanks in advance.
Regards,
Do you have multiple VLANs in your network? If yes, have you trunked all VLANs on new esxi host physical host?
Have You created required virtual machine portgroup with vlan id?
Make sure VM network adapter is in connected state.
Thanks,
Haridas
Do you have multiple VLANs in your network? If yes, have you trunked all VLANs on new esxi host physical host?
Have You created required virtual machine portgroup with vlan id?
Make sure VM network adapter is in connected state.
Thanks,
Haridas
Hello,
Yes, i have multiple VLANs, but trunking in other NIC on this host.
I attached some picture may make this error clearly.
Here is the configuration port on Switch that connect to the NIC on ESXi:
interface GigabitEthernet5/19
description ### To VM03_NIC8 ###
switchport access vlan 122
switchport mode access
speed 1000
duplex full
Is these any miss configuration?
Best regards,
Remove VLAN ID from PortGroup ServerFarm_A and Try. (keep default 0 vlan id in portgroup configuration)
You have configured VLAN 122 as native VLAN to interface 5/19 so you don't need to tag that VLAN ID in portgroup.
Thanks,
Haridas
Hi,
Great.
Thanks in advance.