This script performs backups of virtual machines residing on ESX(i) 3.5/4.x/5.x/6.x/7.x servers using methodology similar to VMware's VCB tool. The script takes snapshots of live running virtual machines, backs up the master VMDK(s) and then upon completion, deletes the snapshot until the next backup. The only caveat is that it utilizes resources available to the Service Console of the ESX server or Busybox Console (Tech Support Mode) of the ESXi server running the backups as opposed to following the traditional method of offloading virtual machine backups through a VCB proxy.
This script has been tested on ESX 3.5/4.x/5.x and ESXi 3.5/4.x/5.x/6.x/7.x and supports the following backup mediums: LOCAL STORAGE, SAN and NFS. The script is non-interactive and can be setup to run via cron. Currently, this script accepts a text file that lists the display names of virtual machine(s) that are to be backed up. Additionally, one can specify a folder containing configuration files on a per VM basis for granular control over backup policies.
Additionally, for ESX(i) environments that don't have persistent NFS datastores designated for backups, the script offers the ability to automatically connect the ESX(i) server to a NFS exported folder and then upon backup completion, disconnect it from the ESX(i) server. The connection is established by creating an NFS datastore link which enables monolithic (or thick) VMDK backups as opposed to using the usual *nix mount command which necessitates breaking VMDK files into the 2gbsparse format for backup. Enabling this mode is self-explanatory and will evidently be so when editing the script (Note: VM_BACKUP_VOLUME variable is ignored if ENABLE_NON_PERSISTENT_NFS=1 ).
In its current configuration, the script will allow up to 3 unique backups of the Virtual Machine before it will overwrite the previous backups; this however, can be modified to fit procedures if need be. Please be diligent in running the script in a test or staging environment before using it on production live Virtual Machines; this script functions well within our environment but there is a chance that it may not fit well into other environments.
If you have any questions, you may post in the dedicated ghettoVCB VMTN community group.
If you have found this script to be useful and would like to contribute back, please click here to donate.
Please read ALL documentation + FAQ's before posting a question about an issue or problem. Thank You
1) Download ghettoVCB from github by clicking on the ZIP button at the top and upload to either your ESX or ESXi system (use scp or WinSCP to transfer the file)
2) Extract the contents of the zip file (filename will vary):
# unzip ghettoVCB-master.zip
Archive: ghettoVCB-master.zip
creating: ghettoVCB-master/
inflating: ghettoVCB-master/README
inflating: ghettoVCB-master/ghettoVCB-restore.sh
inflating: ghettoVCB-master/ghettoVCB-restore_vm_restore_configuration_template
inflating: ghettoVCB-master/ghettoVCB-vm_backup_configuration_template
inflating: ghettoVCB-master/ghettoVCB.conf
inflating: ghettoVCB-master/ghettoVCB.sh
3) The script is now ready to be used and is located in a directory named ghettoVCB-master
# ls -l
-rw-r--r-- 1 root root 281 Jan 6 03:58 README
-rw-r--r-- 1 root root 16024 Jan 6 03:58 ghettoVCB-restore.sh
-rw-r--r-- 1 root root 309 Jan 6 03:58 ghettoVCB-restore_vm_restore_configuration_template
-rw-r--r-- 1 root root 356 Jan 6 03:58 ghettoVCB-vm_backup_configuration_template
-rw-r--r-- 1 root root 631 Jan 6 03:58 ghettoVCB.conf
-rw-r--r-- 1 root root 49375 Jan 6 03:58 ghettoVCB.sh
4) Before using the scripts, you will need to enable the execute permission on both ghettoVCB.sh and ghettoVCB-restore.sh by running the following:
chmod +x ghettoVCB.shchmod +x ghettoVCB-restore.sh
The following variables need to be defined within the script or in VM backup policy prior to execution.
Defining the backup datastore and folder in which the backups are stored (if folder does not exist, it will automatically be created):
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
Defining the backup disk format (zeroedthick, eagerzeroedthick, thin, and 2gbsparse are available):
DISK_BACKUP_FORMAT=thin
Note: If you are using the 2gbsparse on an ESXi 5.1 host, backups may fail. Please download the latest version of the ghettoVCB script which automatically resolves this or take a look at this article for the details.
Defining the backup rotation per VM:
VM_BACKUP_ROTATION_COUNT=3
Defining whether the VM is powered down or not prior to backup (1 = enable, 0 = disable):
Note: VM(s) that are powered off will not require snapshoting
POWER_VM_DOWN_BEFORE_BACKUP=0
Defining whether the VM can be hard powered off when "POWER_VM_DOWN_BEFORE_BACKUP" is enabled and VM does not have VMware Tools installed
ENABLE_HARD_POWER_OFF=0
If "ENABLE_HARD_POWER_OFF" is enabled, then this defines the number of (60sec) iterations the script will before executing a hard power off when:
ITER_TO_WAIT_SHUTDOWN=3
The number (60sec) iterations the script will wait when powering off the VM and will give up and ignore the particular VM for backup:
POWER_DOWN_TIMEOUT=5
The number (60sec) iterations the script will wait when taking a snapshot of a VM and will give up and ignore the particular VM for backup:
Note: Default value should suffice
SNAPSHOT_TIMEOUT=15
Defining whether or not to enable compression (1 = enable, 0 = disable):
ENABLE_COMPRESSION=0
NOTE: With ESXi 3.x/4.x/5.x, there is a limitation of the maximum size of a VM for compression within the unsupported Busybox Console which should not affect backups running classic ESX 3.x,4.x or 5.x. On ESXi 3.x the largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
Defining the adapter type for backed up VMDK (DEPERCATED - NO LONGER NEEDED😞
ADAPTER_FORMAT=buslogic
Defining whether virtual machine memory is snapped and if quiescing is enabled (1 = enable, 0 = disable):
Note: By default both are disabled
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
NOTE: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relevant to the actual snapshot and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
Defining VMDK(s) to backup from a particular VM either a list of vmdks or "all"
VMDK_FILES_TO_BACKUP="myvmdk.vmdk"
Defining whether or not VM(s) with existing snapshots can be backed up. This flag means it will CONSOLIDATE ALL EXISTING SNAPSHOTS for a VM prior to starting the backup (1 = yes, 0 = no):
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
Defining the order of which VM(s) should be shutdown first, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_SHUTDOWN_ORDER=vm1,vm2,vm3
Defining the order of VM(s) that should be started up first after backups have completed, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_STARTUP_ORDER=vm3,vm2,vm1
Defining NON-PERSISTENT NFS Backup Volume (1 = yes, 0 = no):
ENABLE_NON_PERSISTENT_NFS=0
NOTE: This is meant for environments that do not want a persisted connection to their NFS backup volume and allows the NFS volume to only be mounted during backups. The script expects the following 5 variables to be defined if this is to be used: UNMOUNT_NFS, NFS_SERVER, NFS_MOUNT, NFS_LOCAL_NAME and NFS_VM_BACKUP_DIR
Defining whether or not to unmount the NFS backup volume (1 = yes, 0 = no):
UNMOUNT_NFS=0
Defining the NFS server address (IP/hostname):
NFS_SERVER=172.51.0.192
Defining the NFS export path:
NFS_MOUNT=/upload
Defining the NFS datastore name:
NFS_LOCAL_NAME=backup
Defining the NFS backup directory for VMs:
NFS_VM_BACKUP_DIR=mybackups
NOTE: Only supported if you are running vSphere 4.1 and this feature is experimental. If you are having issues with sending mail, please take a look at Email Backup Log section
Defining whether or not to email backup logs (1 = yes, 0 = no):
EMAIL_LOG=1
Defining whether or not to email message will be deleted off the host whether it is successful in sending, this is used for debugging purposes. (1 = yes, 0 = no):
EMAIL_DEBUG=1
Defining email server:
EMAIL_SERVER=auroa.primp-industries.com
Defining email server port:
EMAIL_SERVER_PORT=25
Defining email delay interval (useful if you have slow SMTP server and would like to include a delay in netcat using -i param, default is 1second):
EMAIL_DELAY_INTERVAL=1
Defining recipient of the email:
EMAIL_TO=auroa@primp-industries.com
Defining from user which may require specific domain entry depending on email server configurations:
EMAIL_FROM=root@ghettoVCB
Defining to support RSYNC symbolic link creation (1 = yes, 0 = no):
RSYNC_LINK=0
Note: This enables an automatic creation of a generic symbolic link (both a relative & absolution path) in which users can refer to run replication backups using rsync from a remote host. This does not actually support rsync backups with ghettoVCB. Please take a look at the Rsync Section of the documentation for more details.
# cat ghettoVCB.conf
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=3
POWER_DOWN_TIMEOUT=5
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
ENABLE_NON_PERSISTENT_NFS=0
UNMOUNT_NFS=0
NFS_SERVER=172.30.0.195
NFS_MOUNT=/nfsshare
NFS_LOCAL_NAME=nfs_storage_backup
NFS_VM_BACKUP_DIR=mybackups
SNAPSHOT_TIMEOUT=15
EMAIL_LOG=0
EMAIL_SERVER=auroa.primp-industries.com
EMAIL_SERVER_PORT=25
EMAIL_DELAY_INTERVAL=1
EMAIL_TO=auroa@primp-industries.com
EMAIL_FROM=root@ghettoVCB
WORKDIR_DEBUG=0
VM_SHUTDOWN_ORDER=
VM_STARTUP_ORDER=
To override any existing configurations within the ghettoVCB.sh script and to use a global configuration file, user just needs to specify the new flag -g and path to global configuration file (For an example, please refer to the sample execution section of the documenation)
Running multiple instances of ghettoVCB is now supported with the latest release by specifying the working directory (-w) flag.
By default, the working directory of the ghettoVCB instance is /tmp/ghettoVCB.work and you can run another instance by providing an alternate working directory. You should try to minimize the number of ghettoVCB instances running on your ESXi host as it does consume some amount of resources when running in the ESXi Shell. This is considered an experimental feature, so please test in a development environment to ensure everything is working prior to moving to production system.
Ensure that you do not edit past this section:
########################## DO NOT MODIFY PAST THIS LINE ##########################
# ./ghettoVCB.sh
###############################################################################
#
# ghettoVCB for ESX/ESXi 3.5, 4.x+ and 5.x
# Author: William Lam
# http://www.virtuallyghetto.com/
# Documentation: http://communities.vmware.com/docs/DOC-8760
# Created: 11/17/2008
# Last modified: 2012_12_17 Version 0
#
###############################################################################
Usage: ghettoVCB.sh [options]
OPTIONS:
-a Backup all VMs on host
-f List of VMs to backup
-m Name of VM to backup (overrides -f)
-c VM configuration directory for VM backups
-g Path to global ghettoVCB configuration file
-l File to output logging
-w ghettoVCB work directory (default: )
-d Debug level [info|debug|dryrun] (default: info)
(e.g.)
Backup VMs stored in a list
./ghettoVCB.sh -f vms_to_backup
Backup a single VM
./ghettoVCB.sh -m vm_to_backup
Backup all VMs residing on this host
./ghettoVCB.sh -a
Backup all VMs residing on this host except for the VMs in the exclusion list
./ghettoVCB.sh -a -e vm_exclusion_list
Backup VMs based on specific configuration located in directory
./ghettoVCB.sh -f vms_to_backup -c vm_backup_configs
Backup VMs using global ghettoVCB configuration file
./ghettoVCB.sh -f vms_to_backup -g /global/ghettoVCB.conf
Output will log to /tmp/ghettoVCB.log (consider logging to local or remote datastore to persist logs)
./ghettoVCB.sh -f vms_to_backup -l /vmfs/volume/local-storage/ghettoVCB.log
Dry run (no backup will take place)
./ghettoVCB.sh -f vms_to_backup -d dryrun
The input to this script is a file that contains the display name of the virtual machine(s) separated by a newline. When creating this file on a non-Linux/UNIX system, you may introduce ^M character which can cause the script to miss-behave. To ensure this does not occur, plesae create the file on the ESX/ESXi host.
Here is a sample of what the file would look like:
[root@himalaya ~]# cat vms_to_backup
vCOPS
vMA
vCloudConnector
Debug Mode
Note: This execution mode provides a qucik summary of details on whether a given set of VM(s)/VMDK(s) will be backed up. It provides additional information such as VMs that may have snapshots, VMDK(s) that are configured as independent disks, or other issues that may cause a VM or VMDK to not backed up.
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d dryrun
Logging output to "/tmp/ghettoVCB-2011-03-13_15-19-57.log" ...
2011-03-13 15:19:57 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:19:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:19:57 -- info: CONFIG - GHETTOVCB_PID = 30157
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-19-57
2011-03-13 15:19:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:19:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:19:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:19:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:19:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:19:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:19:57 -- info: CONFIG - LOG_LEVEL = dryrun
2011-03-13 15:19:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-19-57.log
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:19:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:19:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:19:57 -- info:
2011-03-13 15:19:57 -- dryrun: ###############################################
2011-03-13 15:19:57 -- dryrun: Virtual Machine: scofield
2011-03-13 15:19:57 -- dryrun: VM_ID: 704
2011-03-13 15:19:57 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield
2011-03-13 15:19:57 -- dryrun: VMX_CONF: scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:57 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: scofield_3.vmdk 3 GB
2011-03-13 15:19:58 -- dryrun: scofield_2.vmdk 2 GB
2011-03-13 15:19:58 -- dryrun: scofield_1.vmdk 1 GB
2011-03-13 15:19:58 -- dryrun: scofield.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 11 GB
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vMA
2011-03-13 15:19:58 -- dryrun: VM_ID: 1440
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: vMA-000002.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 5 GB
2011-03-13 15:19:58 -- dryrun: Snapshots found for this VM, please commit all snapshots before continuing!
2011-03-13 15:19:58 -- dryrun: THIS VIRTUAL MACHINE WILL NOT BE BACKED UP DUE TO EXISTING SNAPSHOTS!
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vCloudConnector
2011-03-13 15:19:58 -- dryrun: VM_ID: 2064
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector.vmdk 3 GB
2011-03-13 15:19:59 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector_1.vmdk 40 GB
2011-03-13 15:19:59 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 3 GB
2011-03-13 15:19:59 -- dryrun: Snapshots can not be taken for indepdenent disks!
2011-03-13 15:19:59 -- dryrun: THIS VIRTUAL MACHINE WILL NOT HAVE ALL ITS VMDKS BACKED UP!
2011-03-13 15:19:59 -- dryrun: ###############################################
2011-03-13 15:19:59 -- info: ###### Final status: OK, only a dryrun. ######
2011-03-13 15:19:59 -- info: ============================== ghettoVCB LOG END ================================
In the example above, we have 3 VMs to be backed up:
Note: This execution modes provides more in-depth information about environment/backup process including additional storage debugging information which provides information about both the source/destination datastore pre and post backups. This can be very useful in troubleshooting backups
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d debug
Logging output to "/tmp/ghettoVCB-2011-03-13_15-27-59.log" ...
2011-03-13 15:27:59 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:27:59 -- debug: Succesfully acquired lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:27:59 -- debug: HOST VERSION: VMware ESX 4.1.0 build-260247
2011-03-13 15:27:59 -- debug: HOST LEVEL: VMware ESX 4.1.0 GA
2011-03-13 15:27:59 -- debug: HOSTNAME: himalaya.primp-industries.com
2011-03-13 15:27:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:27:59 -- info: CONFIG - GHETTOVCB_PID = 31074
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-27-59
2011-03-13 15:27:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:27:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:27:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:27:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:27:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:27:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:27:59 -- info: CONFIG - LOG_LEVEL = debug
2011-03-13 15:27:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-27-59.log
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:27:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:27:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:27:59 -- info:
2011-03-13 15:28:01 -- debug: Storage Information before backup:
2011-03-13 15:28:01 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:01 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:28:01 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:28:01 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:02 -- info: Initiate backup for scofield
2011-03-13 15:28:02 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_3.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk'...
Clone: 37% done.
2011-03-13 15:28:04 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_2.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 85% done.
2011-03-13 15:28:05 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_1.vmdk"
2011-03-13 15:28:06 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk'...
Clone: 78% done.
2011-03-13 15:29:52 -- info: Backup Duration: 1.83 Minutes
2011-03-13 15:29:52 -- info: Successfully completed backup for scofield!
2011-03-13 15:29:54 -- debug: Storage Information after backup:
2011-03-13 15:29:54 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:54 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:54 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:54 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:55 -- debug: Storage Information before backup:
2011-03-13 15:29:55 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:55 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:55 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:29:57 -- debug: Storage Information before backup:
2011-03-13 15:29:57 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:57 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:57 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:57 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:58 -- info: Initiate backup for vCloudConnector
2011-03-13 15:29:58 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vCloudConnector/vCloudConnector-2011-03-13_15-27-59/vCloudConnector.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 97% done.
2011-03-13 15:30:45 -- info: Backup Duration: 47 Seconds
2011-03-13 15:30:45 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:30:45 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:30:45 -- debug: Succesfully removed lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:30:45 -- info: ============================== ghettoVCB LOG END ================================
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup
# ./ghettoVCB.sh -m MyVM
/ghettoVCB # ./ghettoVCB.sh -a
/ghettoVCB # ./ghettoVCB.sh -a -e vm_exclusion_list
1. Create folder to hold individual VM backup policies (can be named anything):
[root@himalaya ~]# mkdir backup_config
2. Create individual VM backup policies for each VM that ensure each file is named exactly as the display name of the VM being backed up (use provided template to create duplicates):
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template scofield
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template vCloudConnector
Listing of VM backup policy within backup configuration directory
[root@himalaya backup_config]# ls
scofield vCloudConnector
ghettoVCB-vm_backup_configuration_template
Backup policy for "scofield" (backup only 2 specific VMDKs)
[root@himalaya backup_config]# cat scofield
scofield_2.vmdk,scofield_1.vmdk
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Backup policy for VM "vCloudConnector" (backup all VMDKs found)
[root@himalaya backup_config]# cat
vCloudConnectorVM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
vCloudConnector.vmdk
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Note: When specifying -c option (individual VM backup policy mode) if a VM is listed in the backup list but DOES NOT have a corresponding backup policy, the VM will be backed up using the default configuration found within the ghettoVCB.sh script.
Execution of backup
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup -c backup_config -l /tmp/ghettoVCB.log
2011-03-13 15:40:50 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:40:51 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//scofield
2011-03-13 15:40:51 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:51 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:51 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:51 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:51 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:51 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:51 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:51 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:51 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:51 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:51 -- info: CONFIG - VMDK_FILES_TO_BACKUP = scofield_2.vmdk,scofield_1.vmdk
2011-03-13 15:40:51 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:51 -- info:
2011-03-13 15:40:53 -- info: Initiate backup for scofield
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 100% done.
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk'...
Clone: 100% done.
2011-03-13 15:40:55 -- info: Backup Duration: 2 Seconds
2011-03-13 15:40:55 -- info: Successfully completed backup for scofield!
2011-03-13 15:40:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:57 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:40:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:57 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:40:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:57 -- info:
2011-03-13 15:40:59 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:40:59 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//vCloudConnector
2011-03-13 15:40:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:59 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:59 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = vCloudConnector.vmdk
2011-03-13 15:40:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:59 -- info:
2011-03-13 15:41:01 -- info: Initiate backup for vCloudConnector
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 100% done.
2011-03-13 15:41:51 -- info: Backup Duration: 50 Seconds
2011-03-13 15:41:51 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:41:51 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:41:51 -- info: ============================== ghettoVCB LOG END ================================
Please take a look at FAQ #25 for more details before continuing
To make use of this feature, modify the variable ENABLE_COMPRESSION from 0 to 1. Please note, do not mix uncompressed backups with compressed backups. Ensure that directories selected for backups do not contain any backups with previous versions of ghettoVCB before enabling and implementing the compressed backups feature.
nc (netcat) utility must be present for email support to function, this utility is a now a default with the release of vSphere 4.1 or greater, previous releases of VI 3.5 and/or vSphere 4.0 does not contain this utility. The reason this is listed as experimental is it may not be compatible with all email servers as the script utlizes nc (netcat) utility to communicate to an email server. This feature is provided as-is with no guarantees. If you enable this feature, a separate log will be generated along side any normal logging which will be used to email recipient. If for whatever reason, the email fails to send, an entry will appear per the normal logging mechanism.
Users should also make note due to limited functionality of netcat, it uses SMTP pipelining which is not the most ideal method of communicating with an SMTP server. Email from ghettoVCB may not work if your email server does not support this feature.
You can define an email recipient in the following two ways:
EMAIL_TO=william@virtuallyghetto.com
OR
EMAIL_TO=william@virtuallyghetto.com,tuan@virtuallyghetto.com
If you are running ESXi 5.1, you will need to create a custom firewall rule to allow your email traffic to go out which I will assume is default port 25. Here are the steps for creating a custom email rule.
Step 1 - Create a file called /etc/vmware/firewall/email.xml with contains the following:
<ConfigRoot>
<service>
<id>email</id>
<rule id="0000">
<direction>outbound</direction>
<protocol>tcp</protocol>
<porttype>dst</porttype>
<port>25</port>
</rule>
<enabled>true</enabled>
<required>false</required>
</service>
</ConfigRoot>
Step 2 - Reload the ESXi firewall by running the following ESXCLI command:
~ #
esxcli network firewall refresh
Step 3 - Confirm that your email rule has been loaded by running the following ESXCLI command:
~ # esxcli network firewall ruleset list | grep email
email true
Step 4 - Connect to your email server by usingn nc (netcat) by running the following command and specifying the IP Address/Port of your email server:
~ # nc 172.30.0.107 25
220 mail.primp-industries.com ESMTP Postfix
You should recieve a response from your email server and you can enter Ctrl+C to exit. This custom ESXi firewall rule will not persist after a reboot, so you should create a custom VIB to ensure it persists after a system reboot. Please take a look at this article for the details.
To make use of this feature, modify the variable RSYNC_LINK from 0 to 1. Please note, this is an experimental feature request from users that rely on rsync to replicate changes from one datastore volume to another datastore volume. The premise of this feature is to have a standardized folder that rsync can monitor for changes to replicate to another backup datastore. When this feature is enabled, a symbolic link will be generated with the format of "<VMNAME>-symlink" and will reference the latest successful VM backup. You can then rely on this symbolic link to watch for changes and replicate to your backup datastore.
Here is an example of what this would look like:
[root@himalaya ghettoVCB]# ls -la /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/
total 0
drwxr-xr-x 1 nobody nobody 110 Sep 27 08:08 .
drwxr-xr-x 1 nobody nobody 17 Sep 16 14:01 ..
lrwxrwxrwx 1 nobody nobody 89 Sep 27 08:08 vcma-symlink -> /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/vcma-2010-09-27_08-07-37
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:04 vcma-2010-09-27_08-04-26
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:06 vcma-2010-09-27_08-05-55
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:08 vcma-2010-09-27_08-07-37
FYI - This feature has not been tested, please provide feedback if this does not work as expected.
To recover a VM that has been processed by ghettoVCB, please take a look at this document: Ghetto Tech Preview - ghettoVCB-restore.sh - Restoring VM's backed up from ghettoVCB to ESX(i) 3.5, ...
There may be a situation where you need to stop the ghettoVCB process and entering Ctrl+C will only kill off the main ghettoVCB process, however there may still be other spawn processes that you may need to identify and stop. Below are two scenarios you may encounter and the process to completely stop all processes related to ghettoVCB.
Step 1 - Press Ctrl+C which will kill off the main ghettoVCB instance
Step 2 - Search for any existing ghettoVCB process by running the following:
# ps -c | grep ghettoVCB | grep -v grep
3360136 3360136 tail tail -f /tmp/ghettoVCB.work/ghettovcb.Cs1M1x
Step 3 - Here we can see there is a tail command that was used in the script. We need to stop this process by using the kill command which accepts the PID (Process ID) which is identified by the first value on the far left hand side of the command. In this example, it is 3360136.
# kill -9 3360136
Note: Make sure you identify the correct PID, else you could accidently impact a running VM or worse your ESXi host.
Step 4 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Step 1 - Search for the ghettoVCB process (you can also validate the PID from the logs)
~ # ps -c | grep ghettoVCB | grep -v grep
3360393 3360393 busybox ash ./ghettoVCB.sh -f list -d debug
3360790 3360790 tail tail -f /tmp/ghettoVCB.work/ghettovcb.deGeB7
Step 2 - Stop both the main ghettoVCB instance & tail command by using the kill command and specifying their respective PID IDs:
kill -9 3360393
kill -9 3360790
Step 3 - If a VM was in the process of being backed up, there is an additional process for the actual vmkfstools copy. You will need to identify the process for that and kill that as well. We will again use ps -c command and search for any vmkfstools that are running:
# ps -c | grep vmkfstools | grep -v grep
3360796 3360796 vmkfstools /sbin/vmkfstools -i /vmfs/volumes/himalaya-temporary/VC-Windows/VC-Windows.vmdk -a lsilogic -d thin /vmfs/volumes/test-dont-use-this-volume/backups/VC-Windows/VC-Windows-2013-01-26_16-45-35/VC-Windows.vmdk
Step 4 - In case there is someone manually running a vmkfstools, make sure you take a look at the command itself and that it maps back to the current VM that was being backed up before kill the process. Once you have identified the proper PID, go ahead and use the kill command:
# kill -9 3360796
Step 5 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Please take a moment to read over what is a cronjob and how to set one up, before continuing
The task of configuring cronjobs on classic ESX servers (with Service Console) is no different than traditional cronjobs on *nix operating systems (this procedure is outlined in the link above). With ESXi on the other hand, additional factors need to be taken into account when setting up cronjobs in the limited shell console called Busybox because changes made do not persist through a system reboot. The following document will outline steps to ensure that cronjob configurations are saved and present upon a reboot.
Important Note: Always redirect the ghettoVCB output to /dev/null and/or to a log when automating via cron, this becomes very important as one user has identified a limited amount of buffer capacity in which once filled, may cause ghettoVCB to stop in the middle of a backup. This primarily only affects users on ESXi, but it is good practice to always redirect the output. Also ensure you are specifying the FULL PATH when referencing the ghettoVCB script, input or log files.
e.g.
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /dev/null
or
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /tmp/ghettoVCB.log
Task: Configure ghettoVCB.sh to execute a backup five days a week (M-F) at 12AM (midnight) everyday and send output to a unique log file
Configure on ESX:
1. As root, you'll install your cronjob by issuing:
[root@himalaya ~]# crontab -e
2. Append the following entry:
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
3. Save and exit
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -e
no crontab for root - using an empty one
crontab: installing new crontab
4. List out and verify the cronjob that was just created:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -l
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
You're ready to go!
Configure on ESXi:
1. Setup the cronjob by appending the following line to /var/spool/cron/crontabs/root:
0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-$(date +\%s).log
If you are unable to edit/modify /var/spool/cron/crontabs/root, please make a copy and then edit the copy with the changes
cp /var/spool/cron/crontabs/root /var/spool/cron/crontabs/root.backup
Once your changes have been made, then "mv" the backup to the original file. This may occur on ESXi 4.x or 5.x hosts
mv /var/spool/cron/crontabs/root.backup /var/spool/cron/crontabs/root
You can now verify the crontab entry has been updated by using "cat" utility.
2. Kill the current crond (cron daemon) and then restart the crond for the changes to take affect:
On ESXi < 3.5u3
kill $(ps | grep crond | cut -f 1 -d ' ')
On ESXi 3.5u3+
~ # kill $(pidof crond)
~ # crond
On ESXi 4.x/5.0
~ # kill $(cat /var/run/crond.pid)
~ # busybox crond
On ESXi 5.1 to 6.x
~ # kill $(cat /var/run/crond.pid)
~ # crond
On ESXi 7.x
~ # kill $(cat /var/run/crond.pid)
~ # /usr/lib/vmware/busybox/bin/busybox crond
3. Now that the cronjob is ready to go, you need to ensure that this cronjob will persist through a reboot. You'll need to add the following two lines to /etc/rc.local (ensure that the cron entry matches what was defined above). In ESXi 5.1, you will need to edit /etc/rc.local.d/local.sh instead of /etc/rc.local as that is no longer valid.
On ESXi 3.5
/bin/kill $(pidof crond)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 4.x/5.0
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
On ESXi 5.1 to 6.x
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 7.x
/bin/kill $(cat /var/run/crond.pid) > /dev/null 2>&1
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/usr/lib/vmware/busybox/bin/busybox crond
Afterwards the file should look like the following:
~ # cat /etc/rc.local
#! /bin/ash
export PATH=/sbin:/bin
log() {
echo "$1"
logger init "$1"
}
#execute all service retgistered in /etc/rc.local.d
if [http:// -d /etc/rc.local.d |http:// -d /etc/rc.local.d ]; then
for filename in `find /etc/rc.local.d/ | sort`
do
if [ -f $filename ] && [ -x $filename ]; then
log "running $filename"
$filename
fi
done
fi
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
This will ensure that the cronjob is re-created upon a reboot of the system through a startup script
2. To ensure that this is saved in the ESXi configuration, we need to manually initiate an ESXi backup by running:
~ # /sbin/auto-backup.sh
config implicitly loaded
local.tgz
etc/vmware/vmkiscsid/vmkiscsid.db
etc/dropbear/dropbear_dss_host_key
etc/dropbear/dropbear_rsa_host_key
etc/opt/vmware/vpxa/vpxa.cfg
etc/opt/vmware/vpxa/dasConfig.xml
etc/sysconfig/network
etc/vmware/hostd/authorization.xml
etc/vmware/hostd/hostsvc.xml
etc/vmware/hostd/pools.xml
etc/vmware/hostd/vmAutoStart.xml
etc/vmware/hostd/vmInventory.xml
etc/vmware/hostd/proxy.xml
etc/vmware/ssl/rui.crt
etc/vmware/ssl/rui.key
etc/vmware/vmkiscsid/initiatorname.iscsi
etc/vmware/vmkiscsid/iscsid.conf
etc/vmware/vmware.lic
etc/vmware/config
etc/vmware/dvsdata.db
etc/vmware/esx.conf
etc/vmware/license.cfg
etc/vmware/locker.conf
etc/vmware/snmp.xml
etc/group
etc/hosts
etc/inetd.conf
etc/rc.local
etc/chkconfig.db
etc/ntp.conf
etc/passwd
etc/random-seed
etc/resolv.conf
etc/shadow
etc/sfcb/repository/root/interop/cim_indicationfilter.idx
etc/sfcb/repository/root/interop/cim_indicationhandlercimxml.idx
etc/sfcb/repository/root/interop/cim_listenerdestinationcimxml.idx
etc/sfcb/repository/root/interop/cim_indicationsubscription.idx
Binary files /etc/vmware/dvsdata.db and /tmp/auto-backup.31345.dir/etc/vmware/dvsdata.db differ
config implicitly loaded
Saving current state in /bootbank
Clock updated.
Time: 20:40:36 Date: 08/14/2009 UTC
Now you're really done!
If you're still having trouble getting the cronjob to work, ensure that you've specified the correct parameters and there aren’t any typos in any part of the syntax.
Ensure crond (cron daemon) is running:
ESX 3.x/4.0:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# ps -ef | grep crond | grep -v grep
root 2625 1 0 Aug13 ? 00:00:00 crond
ESXi 3.x/4.x/5.x:
~ # ps | grep crond | grep -v grep
5196 5196 busybox crond
Ensure that the date/time on your ESX(i) host is setup correctly:
ESX(i):
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# date
Fri Aug 14 23:44:47 PDT 2009
Note: Careful attention must be noted if more than one backup is performed per day. Backup windows should be staggered to avoid contention or saturation of resources during these periods.
0Q: I'm getting error X when using the script or I'm not getting any errors, the backup didn’t even take place. What can I do?
0A: First off, before posting a comment/question, please thoroughly read through the ENTIRE documentation including the FAQs to see if your question has already been ansered.
1Q: I've read through the entire documentation + FAQs and still have not found my answer to the problem I'm seeing. What can I do?
1A: Please join the ghettoVCB Group to post your question/comment.
2Q: I've sent you private message or email but I haven't received a response? What gives?
2A: I do not accept issues/bugs reported via PM or email, I will reply back, directing you to post on the appropriate VMTN forum (that's what it's for). If the data/results you're providing is truely senstive to your environment I will hear you out, but 99.99% it is not, so please do not messsage/email me directly. I do monitor all forums that contain my script including the normal VMTN forums and will try to get back to your question as soon as I can and as time permits. Please do be patient as you're not the only person using the script (600,000+ views), thank you.
3Q: Can I schedule backups to take place hourly, daily, monthly, yearly?
3A: Yes, do a search online for crontab.
4Q: I would like to setup cronjob for ESX(i) 3.5 or 4.0?
4A: Take a look at the Cronjob FAQ section in this document.
5Q: I want to schedule my backup on Windows, how do I do this?
5A: Do a search for plink. Make sure you have paired SSH keys setup between your Windows system and ESX/ESXi host.
6Q: I only have a single ESXi host. I want to take backups and store them somewhere else. The problem is: I don't have NFS, iSCSI nor FC SAN. What can I do?
6A: You can use local storage to store your backups assuming that you have enough space on the destination datastore. Afterwards, you can use scp (WinSCP/FastSCP) to transfer the backups from the ESXi host to your local desktop.
7Q: I’m pissed; the backup is taking too long. My datastore is of type X?
7A: YMMV, take a look at your storage configuration and make sure it is optimized.
8Q: I noticed that the backup rotation is occurring after a backup. I don't have enough local storage space, can the process be changed?
8A: This is primarily done to ensure that you have at least one good backup in case the new backup fails. If you would like to modify the script, you're more than welcome to do so.
9Q: What is the best storage configuration for datastore type X?
9A: Search the VMTN forums; there are various configurations for the different type of storage/etc.
10Q: I want to setup an NFS server to run my backups. Which is the best and should it be virtual or physical?
10A: Please refer to answer 7A. From experience, we’ve seen physical instances of NFS servers to be faster than their virtual counterparts. As always, YMMV.
11Q: I have VMs that have snapshots. I want to back these things up but the script doesn’t let me do it. How do I fix that?
11A: VM snapshots are not meant to be kept for long durations. When backing up a VM that contains a snapshot, you should ensure all snapshots have been committed prior to running a backup. No exceptions will be made…ever.
12Q: I would like to restore from backup, what is the best method?
12A: The restore process will be unique for each environment and should be determined by your backup/recovery plans. At a high level you have the option of mounting the backup datastore and registering the VM in question or copy the VM from the backup datastore to the ESX/ESXi host. The latter is recommended so that you're not running a VM living on the backup datastore or inadvertently modifying your backup VM(s). You can also take a look at ghettoVCB-restore which is experimentally supported.
13Q: When I try to run the script I get: "-bash: ./ghettoVCB.sh: Permission denied", what is wrong?
13A: You need to change the permission on the script to be executable, chmod +x ghettoVCB.sh
14Q: Where can I download the latest version of the script?
14A: The latest version is available on on github - https://github.com/lamw/ghettoVCB/downloads
15Q: I would like to suggest/recommend feature X, can I get it? When can I get it? Why isn't it here, what gives?
15A: The general purpose of this script is to provide a backup solution around VMware VMs. Any additional features outside of that process will be taken into consideration depending on the amount of time, number of requests and actual usefulness as a whole to the community rather than to an individual.
16Q: I have found this script to be very useful and would like to contribute back, what can I do?
16A: To continue to develop and share new scripts and resources with the community, we need your support. You can donate here Thank You!
17Q: What are the different type of backup uses cases that are supported with ghettoVCB?
17A: 1) Live backup of VM with the use of a snapshot and 2) Offline backup of a VM without a snapshot. These are the only two use cases supported by the script.
18Q: When I execute the script on ESX(i) I get some funky errors such as ": not found.sh" or "command not found". What is this?
18A: Most likely you have some ^M characters within the script which may have come from either editing the script using Windows editor, uploading the script using the datastore browser OR using wget. The best option is to either using WinSCP on Windows to upload the script and edit using vi editor on ESX(i) host OR Linux/UNIX scp to copy the script into the host. If you still continue to have the issue, do a search online on various methods of removing this Windows return carriage from the script
19Q: My backup works fine OR it works for a single backup but I get an error message "Input/output error" or "-ash: YYYY-MM-DD: not found" during the snapshot removal process. What is this?
19A: The issue has been recently identified by few users as a problem with user's NFS server in which it reports an error when deleting large files that take longer than 10seconds. VMware has recently released a KB article http://kb.vmware.com/kb/1035332 explaining the details and starting with vSphere 4.1 Update 2 or vSphere 5.0, a new advanced ESX(i) parameter has been introduced to increase the timeout. This has resolved the problem for several users and maybe something to consider if you are running into this issue, specifically with NFS based backups.
20Q: Will this script function with vCenter and DRS enabled?
20Q: No, if the ESX(i) hosts are in a DRS enabled cluster, VMs that are to be backed up could potentially be backed up twice or never get backed up. The script is executed on a per host basis and one would need to come up a way of tracking backups on all hosts and perhaps write out to external file to ensure that all VMs are backed up. The main use case for this script are for standalone ESX(i) host
21Q: I'm trying to use WinSCP to manually copy VM files but it's very slow or never completes on huge files, why is that?
21A: WinSCP was not designed for copying VM files out of your ESX(i) host, take a look at Veeam's FastSCP which is designed for moving VM files and is a free utility.
22Q: Can I use setup NFS Server using Windows Services for UNIX (WSFU) and will it work?
22A: I've only heard a handful of users that have successfully implemented WSFU and got it working, YMMV. VMware also has a KB article decribing the setup process here: http://kb.vmware.com/kb/1004490 for those that are interested. Here is a thread on a user's experience between Windows Vs. Linux NFS that maybe helpful.
23Q: How do VMware Snapshots work?
23A: http://kb.vmware.com/kb/1015180
24Q: What files make up a Virtual Machine?
24A: http://virtualisedreality.wordpress.com/2009/09/16/quick-reminder-of-what-files-make-up-a-virtual-ma...
25Q: I'm having some issues restoring a compressed VM backup?
25A: There is a limitation in the size of the VM for compression under ESXi 3.x & 4.x, this limitation is in the unsupported Busybox console and should not affect classic ESX 3.x/4.x. On ESXi 3.x, the maximum largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
26Q: I'm backing up my VM as "thin" format but I'm still not noticing any size reduction in the backup? What gives?
2bA: Please refer to this blog post which explains what's going on: http://www.yellow-bricks.com/2009/07/31/storage-vmotion-and-moving-to-a-thin-provisioned-disk/
27Q: I've enabled VM_SNAPSHOT_MEMORY and when I restore my VM it's still offline, I thought this would keep it's memory state?
27A: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relavent to the actual snapshot itself and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
28Q: Can I rename the directories and the VMs after a VM has been backed up?
28A: The answer yes, you can ... but you may run into all sorts of issues which may break the backup process. The script expects a certain layout and specific naming scheme for it to maintain the proper rotation count. If you need to move or rename a VM, please take it out of the directory and place it in another location
29Q: Can ghettoVCB support CBT (Change Block Tracking)?
29A: No, that is a functionality of the vSphere API + VDDK API (vSphere Disk Development Kit). You will need to look at paid solutions such as VMware vDR, Veeam Backup & Recovery, PHD Virtual Backups, etc. to leverage that functionailty.
30Q: Does ghettoVCB support rsync backups?
30A: Currently ghettoVCB does not support rsync backups, you either obtain or compile your own static rsync binary and run on ESXi, but this is an unsupported configuration. You may take a look at this blog post for some details.
31Q: How can I contribute back?
31A: You can provide feedback/comments on the ghettoVCB Group. If you have found this script to be useful and would like to contribute back, please click here to donate.
32Q: How can select individual VMDKs to backup from a VM?
32A: Ideally you would use the "-c" option which requires you to create individual VM configuration file, this is where you would select specific VMDKs to backup. Note, that if you do not need to define all properties, anything not defined will adhere from the default global properties whether you're editing the ghettoVCB.sh script or using ghettoVCB global configuration file. It is not recommended that you edit the ghettoVCB.sh script and modify the VMDK_FILES_TO_BACKUP variable, but if you would like to keep everything in one script, you may add the extensive list of VMDKs to backup but do know this can get error prone as script may be edited frequently and lose some flexibility to support multiple environments.
33Q: Why is email not working when I'm using ESXi 5.x but it worked in ESXi 4.x?
33A: ESXi 5.x has implemented a new firewall which requires the email port that is being used to be opened. Please refer to the following articles on creating a custom firewall rule for email:
http://www.virtuallyghetto.com/2012/09/creating-custom-vibs-for-esxi-50-51.html
How to Create Custom Firewall Rules in ESXi 50
How to Persist Configuration Changes in ESXi 4.x/5.x Part 1
How to Persist Configuration Changes in ESXi 4.x/5.x Part 2
34Q: How do I stop the ghettoVCB process?
34A: Take a look at the Stopping ghettoVCB Process section of the documentation for more details.
Many have asked what is the best configuration and recommendation for setting up a cheap NFS Server to run backups for VMs. This has been a question we've tried to stay away from just because the possiblities and solutions are endless. One can go with physical vs. virtual, use VSA (Virtual Storage Appliances) such as OpenFiler or Lefthand Networks, Windows vs. Linux/UNIX. We've not personally tested and verify all these solutions and it all comes down to "it depends" type of answer. Though from our experience, we've had much better success with a physical server than a virtual.
It is also well known that some users are experiencing backup issues when running specifically against NFS, primarily around the rotation and purging of previous backups. The theory from what we can tell by talking to various users is that when the rotation is occuring, the request to delete the file(s) may take awhile and does not return within a certain time frame and causes the script to error out with unexpected messages. Though the backups were successful, it will cause unexpected results with directory structures on the NFS target. We've not been able to isolate why this is occuring and maybe due to NFS configuration/exports or hardware or connection not being able to support this process.
We'll continue to help where we can in diagonising this issus but we wanted to share our current NFS configuration, perhaps it may help some users who are new or trying to setup their system. ( Disclaimer: These configurations are not recommendations nor endorsement for any of the components being used)
UPDATE: Please also read FAQ #19 for details + resolution
Server Type: Physical
Model: HP DL320 G2
OS: Arch linux 2.6.28
Disks: 2 x 1.5TB
RAID: Software RAID1
Source Host Backups: ESX 3.5u4 and ESX 4.0u1 (We don't run any ESXi hosts)
uname -a output
Linux XXXXX.XXXXX.ucsb.edu 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686 Intel(R) Pentium(R) 4 CPU 3.06GHz GenuineIntel GNU/Linux
NICs:
00:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
00:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
NFS Export Options:
/exports/vm-backups XXX.XXX.XXX.XXX/24(rw,async,all_squash,anonuid=99,anongid=99)
*One important thing to check is to verify that your NFS exportion options are setup correctly, "async" should be configured to ensure that all IO requests are processed and reply back to the client before waiting for the data to be written to the storage.
*Recently VMware released a KB article describing the various "Advanced NFS Options" and their meanings and recommendations: http://kb.vmware.com/kb/1007909 We've not personally had to touch any of these, but for other vendors such as EMC and NetApp, there are some best practices around configuring some of these values depending on the number of NFS volumes or number of ESX(i) host connecting to a volume. You may want to take a look to see if any of these options may help with NFS issue that some are seeing
*Users should also try to look at their ESX(i) host logs during the time interval when they're noticing these issues and see if they can find any correlation along with monitoring the performance on their NFS Server.
*Lastly, there are probably other things that can be done to improve NFS performance or further optimization, a simple search online will also yield many resources.
Windows utility to email ghettoVCB Backup Logs - http://www.waldrondigital.com/2010/05/11/ghettovcb-e-mail-rotate-logs-batch-file-for-vmware/
Windows front-end utility to ghettoVCB - http://www.magikmon.com/mkbackup/ghettovcb.en.html
Note: Neither of these tools are supported, for questions or comments regarding these utilities please refer to the author's pages.
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
Enhancements:
Fixes:
Big thanks to Alain Spineux and his contributions to the ghettoVCB script and helping with debugging and testing.
Enhancements:
Fixes:
Enhancements:
Enhancements:
Enhancements:
Fixes:
Fixes:
Enhancements:
Fixes:
Fixes:
Big thanks goes out to the community for the suggested features and to those that submitted snippet of their modifications.
Updated FAQ #20-24 for common issues/questions. Also included a new section about our "personal" NFS configuration and setup.
Fix the crontab section to reflect the correct syntax + updated FAQ #17,#18 and #19 for common issues.
The following enhancements and fixes have been implemented in this release of ghettoVCB. Special thanks goes out to all the ghettoVCB BETA testers for providing time and their environments to test features/fixes of the new script!
Enhancements:
Fixes:
Why in the world is it so hard to make a normal link to the download location of this script.
I might be a complete moron but am searching now over half an hour to find the script that can be downloaded and of which:
"The latest version is available on this page at the bottom"
Finding the script seems to be harder than getting the script to run
There are even two FAQ's (14 & 19) dedicated to finding the script so probably I'm not the only moron here.
Hello,
I know the document is long, but if you carefully go through it, you'll see that the download is located at the very bottom. As you mentioned, FAQ #14 and #19 tells you exactly where the download is but some people still miss it.
Here is a screenshot if you still can not locate it - http://img337.imageshack.us/img337/9651/picture1tm.png
There's only been a few people who have not been able to locate the download. I agree it probably could be place in a better location but I have ZERO control over this as it's regulated by the JIVE forum software.
Thanks
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi
Wanted to exclude one single VMDK from a machine, but did not found how to do it. It's listed in the features list:
- Ability to include/exclude specific VMDK(s) per VM (requires individual VM backup policy setup)
Don't want to do an include list, because, if i add a new disk to the VM and forget to add it to the include list, it is not backed up. And that could end ins some troubles...
Thanks
Urs
Hi William,
do you have plams to implement an OVF option, I mean backup the VMs in OVF?
Yes this is a feature that is supported, please take a look at the documentation for an example. Specifically search for "Backup policy for "VCAP" (backup only 2 specific VMDKs)" and you'll see an example of the VM backup policy file that is required to backup individual VMDKs
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
No plans, remember that we're still running the script in either the classic ESX Service Console or ESXi's Busybox console. There is no support for the ovftool and it may install on classic ESX, though it definitely won't install on ESXi.
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello!
Having mails of the3 logs would be a very interesting feature for me.
But how do I set it up?
I filled all the fields mail server and so on.
But where must netcat be placed on the esxi?
If yes in which directory?
And what version must be used?
A fedora or can it also be a debian?
Is it true I have to upgrade to esxi 4.1 (I'm using 4.0 now)?
Thank you for your help!
Ralf Oertner
Hello William
Specifically search for "Backup policy for "VCAP" (backup only 2 specific VMDKs)" and you'll see an example of the VM backup policy file that is required to backup individual VMDKs
Thats exactly what i don't want. The example is about making a list of files to include (Only backup the VMDK's which are in the list). I need (would like to have) a list of VMDK's to exclude[/b] from being backed up. Backup all VMDK's except the ones in the list.
Thanks
Urs
Sorry, to do what you're asking for you'll need to specify VMDKs you wish to backup, any that are not listed will not be backed up.
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello William,
i experimented with your backup script(07/27/2010). i worked very well. but i found a little bug and made the email a little prettier.
Hope this is the right way to send you this bugreport
Here is the patch to fix it:
Thanks,
Dieter
@RSW-Orga Much appreciated. I'll take a look after VMworld, definitely planning a minor release with few features + fixes.
Thanks
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I noticed the latest version of the script has a mail option. You may be interested in this mail script I wrote:
I call it from a nightly buildbot (you could call it from cron). It produces a concise email of which hosts were backed up and which couldn't be (snaphots). You will need to modify it for your local setup.
Does anyone know how to stagger the backups of a ghettovcb script? I looked through the comments and googled it with no luck. I have 5 guests on 2 hosts and want to back them all up using ghettoVCB and cron. Thanks!
Nate
I'd like to store VM backups in another ESXi host directly. the GhettoVCB script has an option to store backups in another computer by NFS. How can I use that for an ESXi host destination ?
What's the best way to deal with VM backups when there's no "entherprise class" solution around ? I only have two servers running ESXi 4.1 and a USB mass storage with 500GB. What can I do to make a good backup solution with that ?
Hi, can anyone explain the DISK_BACKUP_FORMAT parameter ? I'm trying to create thin disk backups but all the backup I did using the script comes out as thick disks..
Hi jayclen,
I've experienced the same problem with ESXi 3.5 U5. I almost became desperate, but then I saw your hint and it works fine. Thank you!
Regards
In MKBackup you can specify the name of the VM according to the alias in VSphere. How does this work? And how do you do this by executing the ghettoVCB.sh script directly? There is VMDK_FILES_TO_BACKUP but that is the VMDK name and not the alias.
For anybody having the following problem:
info: ERROR: failed to locate and extract VM_ID for
I found that on my setup, my line endings in my vms-to-backup file got translated to DOS style CRLF, so there were extra ^M at the end of the line. This caused the script grep of /tmp/vms_list to fail. The line in the script was:
VM_ID=`grep -E "\"$\"" /tmp/vms_list | awk -F ";" '{print $1}' | sed 's/"//g'`
but since VM_NAME had a ^M in it, the grep failed.
The simple solution was to translate the line endings back to unix style, and everything worked just fine.
Hi William,
This has worked nicely for me - many thanks. One question though:
I notice that the EVENTS tab in the esxi client does not display information regarding the backup being performed. Is this what you would expect or does the absence of events indicate a problem with my backup?
Thanks,
Peter
GhettoVBC on ESX(i) 4.1.0 give the same messages
You're not running ESX(i) 3.5+ or 4.0+!
Any solution for this ?
You have an old version of ghettovcb. The new versions work with ESXi 4.1.
Hi, thanks for the Script is nice, well ..... , i have a issue when i try to backup 2 VM.
I have a file with the names of the VM and we use the cron for execute the script, but only backup the first VM of the file, if we change the order of the name then backup only the first, and in the log at the end say" delete the snap of VMNAME ......", but dont show the intention to try to do the other snap.
I will like to know if there is something to do to fix my problem.
Thank for any help.
See u.
You're not running ESX(i) 3.5+ or 4.0+!
And ghettovcb-restore.sh do you have a solution for this script ?
Hi. Thank you for your great work
is there a way to schedule and rotate backup on 2 different directory?
i mean, day 1 it backups on a directory, day 2 on a second directory, day 3 backup on directory 1 BUT only if in directory 2 is present previous backup, so that backups can be divided on different datastores for higher security...
is it possible to take care of this situation? monitor backup and rotation this way?
thanks for any kind answer
Hi,
Rotation is only supported on on directory per VM, this is not a feature that I plan on supporting.
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
The solution is actually pretty simple, I've just not had the time to update. Now that VMworld is over, I should be able to get a new release of the script. To be honest, the fix is just adding 4.1 build number into the script, everything else should stay the same. You can take a look at the code that does the version check from ghettoVCB.sh and add that to ghettoVCB-restore.sh.
I don't have the time to verify the restore, but you're more than welcome to let me know if you hit any issues and please post anything released to ghettoVCB-restore here -
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
gvlog2em update - Solution for downloading/parsing ghettoVCB backup logs in Windows without RCLI:
I could not get the experimental email feature to work, and I sold the NAS/NFS/SMB box from my environment where I used to store the backup logs and point my gvlog2em batch file to (SMB). I added some instructions on my blog for using WGET.exe to pull your log files from the web-based datastore without needing RCLI tools. You simply pull the log using WGET, place it on your local Windows disk, and then call my gvlog2em.bat log parser.
Scroll to the bottom of the post where the text is in RED:
http://www.waldrondigital.com/2010/05/11/ghettovcb-e-mail-rotate-logs-batch-file-for-vmware/
Hi
I saw you released a new version 2010-09-28. there is still this little bug in line 257:
should be
awk '{print $1}' |
Hi RSW-Orga,
Thanks for making a note of this, this has been fixed and you can download the latest version now.
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi. This is a great script, but I have a couple of questions.
1) I am using the experimental email support and have noticed that the email settings in VM specific config files in a separate directory get overriden by the email settings in ghettoVCB.sh. Surely the config files specified in the directory by -c should take precedence, otherwise anyone using the -c option is going to end up spamming you with emails (as it's your email details in ghettoVCB.sh by default)?
2) I can't get the functionality to backup a subset of a VM's VMDK files to work. With the setting VMDK_FILES_TO_BACKUP="Ash.vmdk" I get these VMDK files backed up:
/vmfs/volumes/4c2b6a95-f03e05a5-9f13-0019bb5303ea/Ash-Samba-Backups/Ash_1_1.vmdk
/vmfs/volumes/4c2b6a90-ce10ce23-db24-0019bb5303ea/Ash-Homes/Ash_1.vmdk
/vmfs/volumes/4c2b6a90-ce10ce23-db24-0019bb5303ea/Ash/Ash.vmdk
But with the setting VMDK_FILES_TO_BACKUP="Ash.vmdk" I don't get any backed up. What am I doing wrong?
Hi Philled99,
1) Remember when using the -c option, you are only specifying specific configuration at a VM level, this has nothing to do with global configurations which is contained in either ghettoVCB.conf. Email settings is one of the various ghettoVCB global configurations which can be controlled directly in the script or specifying a configuration file using -g option. Please carefully look over the documentation for more details and examples
2) Please take a look at FAQ #0 and #1
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi Lam,
I have read through the whole FAQ and comment section but still have the nfs issue even though i created a new NFS share and formatted it as XFS.
Here is the configuration:
Number of VM's = 9
Size of VM to be backed up = 60 GB
VMware ESXi 4.1.0 build-260247
For execution and dry run, see stdout screen capture at :
I would appreciate if anyone can help and resolve this nfs issue once and for all.
Thanks,
-Kamal.
Hello all, using ghettovbc on ESX 4.1 and a Nexenta NFS storage via a cron with good success.
Question is can the script check the target storage space before trying to run a backup for a VM? Last night ran out of space and the error reported is:
2010-10-06 00:23:15 -- info: Initiate backup for TRB1
2010-10-06 00:23:16 -- info: ERROR: error in backing up of "/vmfs/volumes/nas-store01/TRB1/TRB1.vmdk" for TRB1
2010-10-06 00:23:16 -- info: Backup Duration: 1 Seconds
2010-10-06 00:23:16 -- info: ERROR: Unable to backup TRB1 due to error in VMDK backup!
There is no error on the VMDK, there is just no space on the target NFS only.
Besides this minor issue it works great.
Also, is the new VM Paravirtual SCSI driver supported?
Regards,
Paul Aviles
i don´t think this kind of check should be part of the script. There might be systems that do not behave good when you try to determine the free space left. ( Had a problem a few years ago, when a df-command took about 30min to finish).
I think it would be better if you could create some pre-run, post-run scripts that get called before or after each backup.
With this you should be able to analyse your free disk space and work some other magic to make sure the backup will succeed.
Hi Paul,
Is there any notes or documentation, on how to setup Nexenta NFS storage. Did you setup Nexenta as a Virtual Machine ? I am using openfiler http://www.openfiler.com/
Thanks,
-Kamal.
Perhaps there is a way in the API to check for the total and free space. Based on the fact that VMW is moving away from the linux console in future releases it probably is a bad idea on relaying on DF or linux commands if there is a way via some API to get the same.
Regards,
Paul Aviles
Using Nexenta on a regular physical server. This was an HP X1400 Storage Server which is nothing else than an HP DL 320 G6. I got tired of wasting my time with Windows and HP and found Nexenta one day and been very impressed with the performance.
What I did is created a 40 GB partition and installed Nextenta on it.
I also created a larger raid 5 pool for my VM's and a log pool of 6 GB. (it is used as a caching thing I guess)
Then I created the volume using the definitnion I did on the raid 5 pool. All this is done on the Data Management, Data Sets menus.
Then on Data Management / Shares I selected Create a New Folder and used the following fields.
Name: nas01-vol1/nas-store01 (nas01-vol1 is the volume name created on which the pools exist. A volume has the pools and logs)
Folder Name: whatever name you want
Description: whatever description you want
Record Size: 128K
Log BIAS: Latency
Deduplication; off
Compression: off
Number of Copies:1
Case sensitive: mixed
Unicode Only: off
Sync: standard
Once is created you go back to the Data Management / Shares / Show Summary and there you have checkboxes on the right for CIFS, NFS, FTP, RSYNC, etc. Check on NFS and then Edit. On Auth Type I used the first option on the Pull Down.
Anonymous is checked (must be checked, but security is disabled or controlled by a field called Extra Options later)
Read-Write: *
Root: @10.5.36.0/24 (this is my local subnet)
Extra Options: anon=0 (this disables anonymous access)
Then in ESX you add the storage as follows:
Server: IP of Nexenta
Folder: /volumes/nas01-vol1/nas-store01
Datastore Name: nas-store01
That is pretty much it.
Regards,
Paul Aviles
Hi NickelNetworks,
I'll have to agree with RSW-Orga, this check should not be part of the script. The expectation is that the destination datastore should have sufficient space for your backups, after all, these are for your backups. Yes, we can perform clever tricks to check for space, but there are some down sides as mentioned plus the other issue is how do you check for "real" free space? What if systems are thin provisioned? What if the storage volume is thin provisioned on the array? What is free space at that point? I think this is something that should be monitored from an organization and alerted on if you're low on free space and not the job of the script. Sounds like there needs to be some monitoring setup for your backup datastores if you're running out of space
Regarding any type of API calls .... remember all operations are happening in the Service Console or Busybox Console, we're not using any APIs,etc.
Thanks
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Just updated my gvlog2email Windows batch to version 0.99. The new version has built-in functionality to pull the ghettoVCB logfile out a datastore using WGET (no need for CLI tools, making it very portable). All you need is a Windows machine to run/schedule the task.
A great way to get notifications of your backup status if the built-in functionality of gvcb isn't working for you or is not sufficient for your needs. I use this script personally and at clients - IT WORKS!
http://www.waldrondigital.com/2010/05/11/ghettovcb-e-mail-rotate-logs-batch-file-for-vmware/
hello TS
i`ve been going through your guide (until comments) since 4days ago to understand how to use this thing. and i think that my problem isnt here yet.
i`m currently testing this script onto esxi 4.1.0 and after configured everything i found that no VMs are backed up.
Log :
/ghettoVCB # ./ghettoVCB.sh -a
2010-10-15 15:59:13 -- info: ============================== ghettoVCB LOG START ==============================
2010-10-15 15:59:13 -- info: CONFIG - GHETTOVCB_PID = 70106
2010-10-15 15:59:13 -- info: CONFIG - VM_BACKUP_VOLUME = /espinBackup
2010-10-15 15:59:13 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2010-10-15 15:59:13 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2010-10-15_15-59-13
2010-10-15 15:59:13 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick
2010-10-15 15:59:13 -- info: CONFIG - ADAPTER_FORMAT = buslogic
2010-10-15 15:59:13 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2010-10-15 15:59:13 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2010-10-15 15:59:13 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2010-10-15 15:59:13 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2010-10-15 15:59:13 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2010-10-15 15:59:13 -- info: CONFIG - LOG_LEVEL = info
2010-10-15 15:59:13 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout
2010-10-15 15:59:13 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2010-10-15 15:59:13 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2010-10-15 15:59:13 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2010-10-15 15:59:13 -- info: CONFIG - EMAIL_LOG = 0
2010-10-15 15:59:13 -- info:
2010-10-15 15:59:14 -- info: Initiate backup for WinXP Test
2010-10-15 15:59:14 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-10-15" for WinXP Test
2010-10-15 15:59:17 -- info: ERROR: error in backing up of "/vmfs/volumes/datastore1/WinXP Test/WinXP Test.vmdk" for WinXP Test
2010-10-15 15:59:20 -- info: Removing snapshot from WinXP Test ...
2010-10-15 15:59:20 -- info: Backup Duration: 6 Seconds
2010-10-15 15:59:20 -- info: ERROR: Unable to backup WinXP Test due to error in VMDK backup!
2010-10-15 15:59:20 -- info: Initiate backup for OpenSUse Test
2010-10-15 15:59:20 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-10-15" for OpenSUse Test
2010-10-15 15:59:23 -- info: ERROR: error in backing up of "/vmfs/volumes/datastore1/OpenSUse Te
2010-10-15 15:59:27 -- info: Removing snapshot from OpenSUse Test ...
2010-10-15 15:59:27 -- info: Backup Duration: 7 Seconds
2010-10-15 15:59:27 -- info: ERROR: Unable to backup OpenSUse Test due to error in VMDK backup!
2010-10-15 15:59:27 -- info: ###### Final status: ERROR: No VMs backed up! ######
2010-10-15 15:59:27 -- info: ============================== ghettoVCB LOG END ==================
can you help me to clarify what is the main problem of this?
thank you
One issue I see is that VM_BACKUP_VOLUME variable needs to be the full VMFS path (e.g. /vmfs/volumes/datastore/mybackup_folder, you do not have it setup up correctly which is probably why it's failing. You probably would get more details by changing the debug level. Try updating that and see if you have better success and make sure you go through the documentation and look at the example configs to help
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware VCP3,4
VMware VCAP-DCA4
VMware scripts and resources at:
Getting Started with the vMA (tips/tricks)
Getting Started with the vSphere SDK for Perl
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
thank you lamw finally i managed to do the backup and restore as well. thanks for your help. appreciate that.
walderondigital, I use MKBACKUP to run ghettovcb backups. It emails the summary back to you indicating success or failure and attaches a whole bunch of logs.
Hi there.
Great tool but I stumbed across the "segmentation fault" error when it comes to backup a given machine.
This error seems to trigger when the script executes the $VMWARE_CMD vmsvc/power.getstate is the ID of a given VM.
I have no errors under VMware ESXi 4.1.0 but I do have some under ESXi 3.5.0.
Here's an example:
vim-cmd vmsvc/getallvms
Skipping invalid VM '48'
64 Srv1 WinXP/WinXP.vmx slesGuest vmx-04
96 Srv2 Srv2/Srv2.vmx winNetEnterpriseGuest vmx-04
vim-cmd vmsvc/power.getstate 64
Segmentation fault
vim-cmd vmsvc/power.getstate 96
Segmentation fault
Dunno if this is a bug under 3.5 but the above condition cause GhetooVCB to fail.
Cheers,
Rob
Hi,
i have this issue when I try to backup some VMs:
2010-10-28 13:45:33 -- info: Initiate backup for ServerX
2010-10-28 13:45:33 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-10-28" for ServerX
2010-10-28 13:45:34 -- debug: Waiting for snapshot "ghettoVCB-snapshot-2010-10-28" to be created
2010-10-28 13:45:34 -- debug: Snapshot timeout set to: 900 seconds
2010-10-28 13:45:36 -- debug: /sbin/vmkfstools -i "/vmfs/volumes/iSCSI_Openfiler/ServerX/ServerX.vmdk" -a "buslogic" -d "zeroedthick" "/vmfs/volumes/NAS_QNAP/BKPs//ServerX/ServerX-2010-10-28_13-45-29/ServerX.vmdk"
2010-10-28 13:45:36 -- info: ERROR: error in backing up of "/vmfs/volumes/iSCSI_Openfiler/ServerX/ServerX.vmdk" for ServerX
2010-10-28 13:45:38 -- info: Removing snapshot from ServerX ...
2010-10-28 13:45:43 -- debug: Removing /vmfs/volumes/NAS_QNAP/BKPs//Server07/Server07-2010-10-28_13-41-27
2010-10-28 13:45:43 -- info: Backup Duration: 10 Seconds
2010-10-28 13:45:43 -- info: ERROR: Unable to backup Server07 due to error in VMDK backup!
2010-10-28 13:45:43 -- info: ###### Final status: ERROR: No VMs backed up! ######
2010-10-28 13:45:43 -- debug: Succesfully removed lock directory - /tmp/ghettoVCB.lock
Some times the backup was done, in most cases not.
I search on google but nothing...
Any idea?
thx
hi all. thanks for the backup script. it works well with my current setup.
i have a question regarding the storage. apart from backing up to local datastore or NFS, is there any way to send all backup images to ftp server using this script? i read all the comments and until now i still dont get the idea on how to mount the ftp server storage to the esxi datastore..
thanks for your help.
Hi lamw
I tested your new version of ghettoVCB. Script sends email log now. It is fine.
But I and my customers had problem with unfinished backup, see my post form Aug 4, 2010 9:37 AM
I think that there is conflict between commands tail and vmkfstools while using NFS datastore.
My solution rests in usage redirection by classic command tee. It works OK now.
Next I need to have result of vmfkstools operation in log file and/or in email.
Therefore I did changes in script:
First part
-
logger() {
...
if [ && [ || [ || [; then
TIME=$(date +%F" "%H:%M:%S)
if ; then
echo -e "${TIME} -- $: $" else echo -e "$ -- $: $" >> "$" fi if ; then echo -ne "$ -- $: $\r\n" >> "$" fi + else + if ; then + TIME=$(date +%F" "%H:%M:%S) + if ; then + echo -e "$ -- $: $" >> "$" + cat $ >> "$" + echo >> "$" + fi + if ; then + echo -ne "$ -- $: $\r\n" >> "$"
+ cat $ >> "$" + echo >> "$"
+ fi
+ fi
fi
-
Second part
-
VMDK_OUTPUT=$(mktemp /tmp/ghettovcb.XXXXXX)
# tail -f "$" &
# TAIL_PID=$!
if ; then
logger "debug" "$ -i \"$
\" -a \"$\" \"$\""
" 2>&1
+ $ -i "$" -a "$" "$" 2>&1 | tee "$"
else
logger "debug" "$ -i \"$\" -a \"$\" -d \"$
\" \"$\""
" -a "$" -d "$" "$" > "$" 2>&1
+ $ -i "$" -a "$" -d "$" "$" 2>&1 | tee "$
"
fi
VMDK_EXIT_CODE=$?
" >> "$"
+ logger "logfile" "$
"
"
echo
-
Sorry, readable copy is here: http://pastebin.com/vRciu4zR
row with symbol # you delete
row with symbol + you add but without +
After starting of ghetto script scheduled by cron problem with unfinished backup was back again but only with classic vSphere 4.x, no problem with ESXi.
I don't know why but I think that reason lies in small buffer.
My solution rest in usage util screen
I download it here:
http://merlin.fit.vutbr.cz/mirrors/centos/5/os/x86_64/CentOS/screen-4.0.3-1.el5_4.1.x86_64.rpm
and instaled:
rpm -Uvh screen-4.0.3-1.el5_4.1.x86_64.rpm
I modified cron file like this:
0 23 * * 1-5 screen -d -m -O -S ghetto /vmfs/volumes/local/_script/ghetto
After that backup works perfect.
One my customer have mail server that fail to receive email from script.
Solution is adding parameter -i for delay communication:
"$" -i 5 "$" ...
Maybe this post will help someone.
Hi, I have noticed that descripted modification are unintelligible. Sorry.
Here you can find transparent version:
Hi ,
I have exactly the same error,
2010-11-03 10:30:41 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-11-03" for test_fred
2010-11-03 10:30:44 -- debug: Waiting for snapshot "ghettoVCB-snapshot-2010-11-03" to be created
2010-11-03 10:30:44 -- debug: Snapshot timeout set to: 900 seconds
2010-11-03 10:30:45 -- debug: /sbin/vmkfstools -i "/vmfs/volumes/VM2/test_fred/test_fred.vmdk" -a "buslogic" -d "zeroedthick" "/vmfs/volumes/NAS2/test_fred/test_fred-2010-11-03_10-30-38/test_fred.vmdk"
2010-11-03 10:30:45 -- info: ERROR: error in backing up of "/vmfs/volumes/VM2/test_fred/test_fred.vmdk" for test_fred
2010-11-03 10:30:50 -- info: Removing snapshot from test_fred ...
2010-11-03 10:30:50 -- info: Backup Duration: 9 Seconds
2010-11-03 10:30:50 -- info: ERROR: Unable to backup test_fred due to error in VMDK backup
Do you find a solution ?
Best regards