This script performs backups of virtual machines residing on ESX(i) 3.5/4.x/5.x/6.x/7.x servers using methodology similar to VMware's VCB tool. The script takes snapshots of live running virtual machines, backs up the master VMDK(s) and then upon completion, deletes the snapshot until the next backup. The only caveat is that it utilizes resources available to the Service Console of the ESX server or Busybox Console (Tech Support Mode) of the ESXi server running the backups as opposed to following the traditional method of offloading virtual machine backups through a VCB proxy.
This script has been tested on ESX 3.5/4.x/5.x and ESXi 3.5/4.x/5.x/6.x/7.x and supports the following backup mediums: LOCAL STORAGE, SAN and NFS. The script is non-interactive and can be setup to run via cron. Currently, this script accepts a text file that lists the display names of virtual machine(s) that are to be backed up. Additionally, one can specify a folder containing configuration files on a per VM basis for granular control over backup policies.
Additionally, for ESX(i) environments that don't have persistent NFS datastores designated for backups, the script offers the ability to automatically connect the ESX(i) server to a NFS exported folder and then upon backup completion, disconnect it from the ESX(i) server. The connection is established by creating an NFS datastore link which enables monolithic (or thick) VMDK backups as opposed to using the usual *nix mount command which necessitates breaking VMDK files into the 2gbsparse format for backup. Enabling this mode is self-explanatory and will evidently be so when editing the script (Note: VM_BACKUP_VOLUME variable is ignored if ENABLE_NON_PERSISTENT_NFS=1 ).
In its current configuration, the script will allow up to 3 unique backups of the Virtual Machine before it will overwrite the previous backups; this however, can be modified to fit procedures if need be. Please be diligent in running the script in a test or staging environment before using it on production live Virtual Machines; this script functions well within our environment but there is a chance that it may not fit well into other environments.
If you have any questions, you may post in the dedicated ghettoVCB VMTN community group.
If you have found this script to be useful and would like to contribute back, please click here to donate.
Please read ALL documentation + FAQ's before posting a question about an issue or problem. Thank You
1) Download ghettoVCB from github by clicking on the ZIP button at the top and upload to either your ESX or ESXi system (use scp or WinSCP to transfer the file)
2) Extract the contents of the zip file (filename will vary):
# unzip ghettoVCB-master.zip
Archive: ghettoVCB-master.zip
creating: ghettoVCB-master/
inflating: ghettoVCB-master/README
inflating: ghettoVCB-master/ghettoVCB-restore.sh
inflating: ghettoVCB-master/ghettoVCB-restore_vm_restore_configuration_template
inflating: ghettoVCB-master/ghettoVCB-vm_backup_configuration_template
inflating: ghettoVCB-master/ghettoVCB.conf
inflating: ghettoVCB-master/ghettoVCB.sh
3) The script is now ready to be used and is located in a directory named ghettoVCB-master
# ls -l
-rw-r--r-- 1 root root 281 Jan 6 03:58 README
-rw-r--r-- 1 root root 16024 Jan 6 03:58 ghettoVCB-restore.sh
-rw-r--r-- 1 root root 309 Jan 6 03:58 ghettoVCB-restore_vm_restore_configuration_template
-rw-r--r-- 1 root root 356 Jan 6 03:58 ghettoVCB-vm_backup_configuration_template
-rw-r--r-- 1 root root 631 Jan 6 03:58 ghettoVCB.conf
-rw-r--r-- 1 root root 49375 Jan 6 03:58 ghettoVCB.sh
4) Before using the scripts, you will need to enable the execute permission on both ghettoVCB.sh and ghettoVCB-restore.sh by running the following:
chmod +x ghettoVCB.shchmod +x ghettoVCB-restore.sh
The following variables need to be defined within the script or in VM backup policy prior to execution.
Defining the backup datastore and folder in which the backups are stored (if folder does not exist, it will automatically be created):
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
Defining the backup disk format (zeroedthick, eagerzeroedthick, thin, and 2gbsparse are available):
DISK_BACKUP_FORMAT=thin
Note: If you are using the 2gbsparse on an ESXi 5.1 host, backups may fail. Please download the latest version of the ghettoVCB script which automatically resolves this or take a look at this article for the details.
Defining the backup rotation per VM:
VM_BACKUP_ROTATION_COUNT=3
Defining whether the VM is powered down or not prior to backup (1 = enable, 0 = disable):
Note: VM(s) that are powered off will not require snapshoting
POWER_VM_DOWN_BEFORE_BACKUP=0
Defining whether the VM can be hard powered off when "POWER_VM_DOWN_BEFORE_BACKUP" is enabled and VM does not have VMware Tools installed
ENABLE_HARD_POWER_OFF=0
If "ENABLE_HARD_POWER_OFF" is enabled, then this defines the number of (60sec) iterations the script will before executing a hard power off when:
ITER_TO_WAIT_SHUTDOWN=3
The number (60sec) iterations the script will wait when powering off the VM and will give up and ignore the particular VM for backup:
POWER_DOWN_TIMEOUT=5
The number (60sec) iterations the script will wait when taking a snapshot of a VM and will give up and ignore the particular VM for backup:
Note: Default value should suffice
SNAPSHOT_TIMEOUT=15
Defining whether or not to enable compression (1 = enable, 0 = disable):
ENABLE_COMPRESSION=0
NOTE: With ESXi 3.x/4.x/5.x, there is a limitation of the maximum size of a VM for compression within the unsupported Busybox Console which should not affect backups running classic ESX 3.x,4.x or 5.x. On ESXi 3.x the largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
Defining the adapter type for backed up VMDK (DEPERCATED - NO LONGER NEEDED😞
ADAPTER_FORMAT=buslogic
Defining whether virtual machine memory is snapped and if quiescing is enabled (1 = enable, 0 = disable):
Note: By default both are disabled
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
NOTE: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relevant to the actual snapshot and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
Defining VMDK(s) to backup from a particular VM either a list of vmdks or "all"
VMDK_FILES_TO_BACKUP="myvmdk.vmdk"
Defining whether or not VM(s) with existing snapshots can be backed up. This flag means it will CONSOLIDATE ALL EXISTING SNAPSHOTS for a VM prior to starting the backup (1 = yes, 0 = no):
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
Defining the order of which VM(s) should be shutdown first, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_SHUTDOWN_ORDER=vm1,vm2,vm3
Defining the order of VM(s) that should be started up first after backups have completed, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_STARTUP_ORDER=vm3,vm2,vm1
Defining NON-PERSISTENT NFS Backup Volume (1 = yes, 0 = no):
ENABLE_NON_PERSISTENT_NFS=0
NOTE: This is meant for environments that do not want a persisted connection to their NFS backup volume and allows the NFS volume to only be mounted during backups. The script expects the following 5 variables to be defined if this is to be used: UNMOUNT_NFS, NFS_SERVER, NFS_MOUNT, NFS_LOCAL_NAME and NFS_VM_BACKUP_DIR
Defining whether or not to unmount the NFS backup volume (1 = yes, 0 = no):
UNMOUNT_NFS=0
Defining the NFS server address (IP/hostname):
NFS_SERVER=172.51.0.192
Defining the NFS export path:
NFS_MOUNT=/upload
Defining the NFS datastore name:
NFS_LOCAL_NAME=backup
Defining the NFS backup directory for VMs:
NFS_VM_BACKUP_DIR=mybackups
NOTE: Only supported if you are running vSphere 4.1 and this feature is experimental. If you are having issues with sending mail, please take a look at Email Backup Log section
Defining whether or not to email backup logs (1 = yes, 0 = no):
EMAIL_LOG=1
Defining whether or not to email message will be deleted off the host whether it is successful in sending, this is used for debugging purposes. (1 = yes, 0 = no):
EMAIL_DEBUG=1
Defining email server:
EMAIL_SERVER=auroa.primp-industries.com
Defining email server port:
EMAIL_SERVER_PORT=25
Defining email delay interval (useful if you have slow SMTP server and would like to include a delay in netcat using -i param, default is 1second):
EMAIL_DELAY_INTERVAL=1
Defining recipient of the email:
EMAIL_TO=auroa@primp-industries.com
Defining from user which may require specific domain entry depending on email server configurations:
EMAIL_FROM=root@ghettoVCB
Defining to support RSYNC symbolic link creation (1 = yes, 0 = no):
RSYNC_LINK=0
Note: This enables an automatic creation of a generic symbolic link (both a relative & absolution path) in which users can refer to run replication backups using rsync from a remote host. This does not actually support rsync backups with ghettoVCB. Please take a look at the Rsync Section of the documentation for more details.
# cat ghettoVCB.conf
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=3
POWER_DOWN_TIMEOUT=5
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
ENABLE_NON_PERSISTENT_NFS=0
UNMOUNT_NFS=0
NFS_SERVER=172.30.0.195
NFS_MOUNT=/nfsshare
NFS_LOCAL_NAME=nfs_storage_backup
NFS_VM_BACKUP_DIR=mybackups
SNAPSHOT_TIMEOUT=15
EMAIL_LOG=0
EMAIL_SERVER=auroa.primp-industries.com
EMAIL_SERVER_PORT=25
EMAIL_DELAY_INTERVAL=1
EMAIL_TO=auroa@primp-industries.com
EMAIL_FROM=root@ghettoVCB
WORKDIR_DEBUG=0
VM_SHUTDOWN_ORDER=
VM_STARTUP_ORDER=
To override any existing configurations within the ghettoVCB.sh script and to use a global configuration file, user just needs to specify the new flag -g and path to global configuration file (For an example, please refer to the sample execution section of the documenation)
Running multiple instances of ghettoVCB is now supported with the latest release by specifying the working directory (-w) flag.
By default, the working directory of the ghettoVCB instance is /tmp/ghettoVCB.work and you can run another instance by providing an alternate working directory. You should try to minimize the number of ghettoVCB instances running on your ESXi host as it does consume some amount of resources when running in the ESXi Shell. This is considered an experimental feature, so please test in a development environment to ensure everything is working prior to moving to production system.
Ensure that you do not edit past this section:
########################## DO NOT MODIFY PAST THIS LINE ##########################
# ./ghettoVCB.sh
###############################################################################
#
# ghettoVCB for ESX/ESXi 3.5, 4.x+ and 5.x
# Author: William Lam
# http://www.virtuallyghetto.com/
# Documentation: http://communities.vmware.com/docs/DOC-8760
# Created: 11/17/2008
# Last modified: 2012_12_17 Version 0
#
###############################################################################
Usage: ghettoVCB.sh [options]
OPTIONS:
-a Backup all VMs on host
-f List of VMs to backup
-m Name of VM to backup (overrides -f)
-c VM configuration directory for VM backups
-g Path to global ghettoVCB configuration file
-l File to output logging
-w ghettoVCB work directory (default: )
-d Debug level [info|debug|dryrun] (default: info)
(e.g.)
Backup VMs stored in a list
./ghettoVCB.sh -f vms_to_backup
Backup a single VM
./ghettoVCB.sh -m vm_to_backup
Backup all VMs residing on this host
./ghettoVCB.sh -a
Backup all VMs residing on this host except for the VMs in the exclusion list
./ghettoVCB.sh -a -e vm_exclusion_list
Backup VMs based on specific configuration located in directory
./ghettoVCB.sh -f vms_to_backup -c vm_backup_configs
Backup VMs using global ghettoVCB configuration file
./ghettoVCB.sh -f vms_to_backup -g /global/ghettoVCB.conf
Output will log to /tmp/ghettoVCB.log (consider logging to local or remote datastore to persist logs)
./ghettoVCB.sh -f vms_to_backup -l /vmfs/volume/local-storage/ghettoVCB.log
Dry run (no backup will take place)
./ghettoVCB.sh -f vms_to_backup -d dryrun
The input to this script is a file that contains the display name of the virtual machine(s) separated by a newline. When creating this file on a non-Linux/UNIX system, you may introduce ^M character which can cause the script to miss-behave. To ensure this does not occur, plesae create the file on the ESX/ESXi host.
Here is a sample of what the file would look like:
[root@himalaya ~]# cat vms_to_backup
vCOPS
vMA
vCloudConnector
Debug Mode
Note: This execution mode provides a qucik summary of details on whether a given set of VM(s)/VMDK(s) will be backed up. It provides additional information such as VMs that may have snapshots, VMDK(s) that are configured as independent disks, or other issues that may cause a VM or VMDK to not backed up.
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d dryrun
Logging output to "/tmp/ghettoVCB-2011-03-13_15-19-57.log" ...
2011-03-13 15:19:57 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:19:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:19:57 -- info: CONFIG - GHETTOVCB_PID = 30157
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-19-57
2011-03-13 15:19:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:19:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:19:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:19:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:19:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:19:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:19:57 -- info: CONFIG - LOG_LEVEL = dryrun
2011-03-13 15:19:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-19-57.log
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:19:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:19:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:19:57 -- info:
2011-03-13 15:19:57 -- dryrun: ###############################################
2011-03-13 15:19:57 -- dryrun: Virtual Machine: scofield
2011-03-13 15:19:57 -- dryrun: VM_ID: 704
2011-03-13 15:19:57 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield
2011-03-13 15:19:57 -- dryrun: VMX_CONF: scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:57 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: scofield_3.vmdk 3 GB
2011-03-13 15:19:58 -- dryrun: scofield_2.vmdk 2 GB
2011-03-13 15:19:58 -- dryrun: scofield_1.vmdk 1 GB
2011-03-13 15:19:58 -- dryrun: scofield.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 11 GB
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vMA
2011-03-13 15:19:58 -- dryrun: VM_ID: 1440
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: vMA-000002.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 5 GB
2011-03-13 15:19:58 -- dryrun: Snapshots found for this VM, please commit all snapshots before continuing!
2011-03-13 15:19:58 -- dryrun: THIS VIRTUAL MACHINE WILL NOT BE BACKED UP DUE TO EXISTING SNAPSHOTS!
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vCloudConnector
2011-03-13 15:19:58 -- dryrun: VM_ID: 2064
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector.vmdk 3 GB
2011-03-13 15:19:59 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector_1.vmdk 40 GB
2011-03-13 15:19:59 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 3 GB
2011-03-13 15:19:59 -- dryrun: Snapshots can not be taken for indepdenent disks!
2011-03-13 15:19:59 -- dryrun: THIS VIRTUAL MACHINE WILL NOT HAVE ALL ITS VMDKS BACKED UP!
2011-03-13 15:19:59 -- dryrun: ###############################################
2011-03-13 15:19:59 -- info: ###### Final status: OK, only a dryrun. ######
2011-03-13 15:19:59 -- info: ============================== ghettoVCB LOG END ================================
In the example above, we have 3 VMs to be backed up:
Note: This execution modes provides more in-depth information about environment/backup process including additional storage debugging information which provides information about both the source/destination datastore pre and post backups. This can be very useful in troubleshooting backups
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d debug
Logging output to "/tmp/ghettoVCB-2011-03-13_15-27-59.log" ...
2011-03-13 15:27:59 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:27:59 -- debug: Succesfully acquired lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:27:59 -- debug: HOST VERSION: VMware ESX 4.1.0 build-260247
2011-03-13 15:27:59 -- debug: HOST LEVEL: VMware ESX 4.1.0 GA
2011-03-13 15:27:59 -- debug: HOSTNAME: himalaya.primp-industries.com
2011-03-13 15:27:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:27:59 -- info: CONFIG - GHETTOVCB_PID = 31074
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-27-59
2011-03-13 15:27:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:27:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:27:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:27:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:27:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:27:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:27:59 -- info: CONFIG - LOG_LEVEL = debug
2011-03-13 15:27:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-27-59.log
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:27:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:27:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:27:59 -- info:
2011-03-13 15:28:01 -- debug: Storage Information before backup:
2011-03-13 15:28:01 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:01 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:28:01 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:28:01 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:02 -- info: Initiate backup for scofield
2011-03-13 15:28:02 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_3.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk'...
Clone: 37% done.
2011-03-13 15:28:04 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_2.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 85% done.
2011-03-13 15:28:05 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_1.vmdk"
2011-03-13 15:28:06 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk'...
Clone: 78% done.
2011-03-13 15:29:52 -- info: Backup Duration: 1.83 Minutes
2011-03-13 15:29:52 -- info: Successfully completed backup for scofield!
2011-03-13 15:29:54 -- debug: Storage Information after backup:
2011-03-13 15:29:54 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:54 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:54 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:54 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:55 -- debug: Storage Information before backup:
2011-03-13 15:29:55 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:55 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:55 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:29:57 -- debug: Storage Information before backup:
2011-03-13 15:29:57 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:57 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:57 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:57 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:58 -- info: Initiate backup for vCloudConnector
2011-03-13 15:29:58 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vCloudConnector/vCloudConnector-2011-03-13_15-27-59/vCloudConnector.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 97% done.
2011-03-13 15:30:45 -- info: Backup Duration: 47 Seconds
2011-03-13 15:30:45 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:30:45 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:30:45 -- debug: Succesfully removed lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:30:45 -- info: ============================== ghettoVCB LOG END ================================
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup
# ./ghettoVCB.sh -m MyVM
/ghettoVCB # ./ghettoVCB.sh -a
/ghettoVCB # ./ghettoVCB.sh -a -e vm_exclusion_list
1. Create folder to hold individual VM backup policies (can be named anything):
[root@himalaya ~]# mkdir backup_config
2. Create individual VM backup policies for each VM that ensure each file is named exactly as the display name of the VM being backed up (use provided template to create duplicates):
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template scofield
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template vCloudConnector
Listing of VM backup policy within backup configuration directory
[root@himalaya backup_config]# ls
scofield vCloudConnector
ghettoVCB-vm_backup_configuration_template
Backup policy for "scofield" (backup only 2 specific VMDKs)
[root@himalaya backup_config]# cat scofield
scofield_2.vmdk,scofield_1.vmdk
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Backup policy for VM "vCloudConnector" (backup all VMDKs found)
[root@himalaya backup_config]# cat
vCloudConnectorVM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
vCloudConnector.vmdk
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Note: When specifying -c option (individual VM backup policy mode) if a VM is listed in the backup list but DOES NOT have a corresponding backup policy, the VM will be backed up using the default configuration found within the ghettoVCB.sh script.
Execution of backup
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup -c backup_config -l /tmp/ghettoVCB.log
2011-03-13 15:40:50 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:40:51 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//scofield
2011-03-13 15:40:51 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:51 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:51 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:51 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:51 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:51 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:51 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:51 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:51 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:51 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:51 -- info: CONFIG - VMDK_FILES_TO_BACKUP = scofield_2.vmdk,scofield_1.vmdk
2011-03-13 15:40:51 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:51 -- info:
2011-03-13 15:40:53 -- info: Initiate backup for scofield
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 100% done.
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk'...
Clone: 100% done.
2011-03-13 15:40:55 -- info: Backup Duration: 2 Seconds
2011-03-13 15:40:55 -- info: Successfully completed backup for scofield!
2011-03-13 15:40:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:57 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:40:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:57 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:40:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:57 -- info:
2011-03-13 15:40:59 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:40:59 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//vCloudConnector
2011-03-13 15:40:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:59 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:59 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = vCloudConnector.vmdk
2011-03-13 15:40:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:59 -- info:
2011-03-13 15:41:01 -- info: Initiate backup for vCloudConnector
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 100% done.
2011-03-13 15:41:51 -- info: Backup Duration: 50 Seconds
2011-03-13 15:41:51 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:41:51 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:41:51 -- info: ============================== ghettoVCB LOG END ================================
Please take a look at FAQ #25 for more details before continuing
To make use of this feature, modify the variable ENABLE_COMPRESSION from 0 to 1. Please note, do not mix uncompressed backups with compressed backups. Ensure that directories selected for backups do not contain any backups with previous versions of ghettoVCB before enabling and implementing the compressed backups feature.
nc (netcat) utility must be present for email support to function, this utility is a now a default with the release of vSphere 4.1 or greater, previous releases of VI 3.5 and/or vSphere 4.0 does not contain this utility. The reason this is listed as experimental is it may not be compatible with all email servers as the script utlizes nc (netcat) utility to communicate to an email server. This feature is provided as-is with no guarantees. If you enable this feature, a separate log will be generated along side any normal logging which will be used to email recipient. If for whatever reason, the email fails to send, an entry will appear per the normal logging mechanism.
Users should also make note due to limited functionality of netcat, it uses SMTP pipelining which is not the most ideal method of communicating with an SMTP server. Email from ghettoVCB may not work if your email server does not support this feature.
You can define an email recipient in the following two ways:
EMAIL_TO=william@virtuallyghetto.com
OR
EMAIL_TO=william@virtuallyghetto.com,tuan@virtuallyghetto.com
If you are running ESXi 5.1, you will need to create a custom firewall rule to allow your email traffic to go out which I will assume is default port 25. Here are the steps for creating a custom email rule.
Step 1 - Create a file called /etc/vmware/firewall/email.xml with contains the following:
<ConfigRoot>
<service>
<id>email</id>
<rule id="0000">
<direction>outbound</direction>
<protocol>tcp</protocol>
<porttype>dst</porttype>
<port>25</port>
</rule>
<enabled>true</enabled>
<required>false</required>
</service>
</ConfigRoot>
Step 2 - Reload the ESXi firewall by running the following ESXCLI command:
~ #
esxcli network firewall refresh
Step 3 - Confirm that your email rule has been loaded by running the following ESXCLI command:
~ # esxcli network firewall ruleset list | grep email
email true
Step 4 - Connect to your email server by usingn nc (netcat) by running the following command and specifying the IP Address/Port of your email server:
~ # nc 172.30.0.107 25
220 mail.primp-industries.com ESMTP Postfix
You should recieve a response from your email server and you can enter Ctrl+C to exit. This custom ESXi firewall rule will not persist after a reboot, so you should create a custom VIB to ensure it persists after a system reboot. Please take a look at this article for the details.
To make use of this feature, modify the variable RSYNC_LINK from 0 to 1. Please note, this is an experimental feature request from users that rely on rsync to replicate changes from one datastore volume to another datastore volume. The premise of this feature is to have a standardized folder that rsync can monitor for changes to replicate to another backup datastore. When this feature is enabled, a symbolic link will be generated with the format of "<VMNAME>-symlink" and will reference the latest successful VM backup. You can then rely on this symbolic link to watch for changes and replicate to your backup datastore.
Here is an example of what this would look like:
[root@himalaya ghettoVCB]# ls -la /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/
total 0
drwxr-xr-x 1 nobody nobody 110 Sep 27 08:08 .
drwxr-xr-x 1 nobody nobody 17 Sep 16 14:01 ..
lrwxrwxrwx 1 nobody nobody 89 Sep 27 08:08 vcma-symlink -> /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/vcma-2010-09-27_08-07-37
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:04 vcma-2010-09-27_08-04-26
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:06 vcma-2010-09-27_08-05-55
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:08 vcma-2010-09-27_08-07-37
FYI - This feature has not been tested, please provide feedback if this does not work as expected.
To recover a VM that has been processed by ghettoVCB, please take a look at this document: Ghetto Tech Preview - ghettoVCB-restore.sh - Restoring VM's backed up from ghettoVCB to ESX(i) 3.5, ...
There may be a situation where you need to stop the ghettoVCB process and entering Ctrl+C will only kill off the main ghettoVCB process, however there may still be other spawn processes that you may need to identify and stop. Below are two scenarios you may encounter and the process to completely stop all processes related to ghettoVCB.
Step 1 - Press Ctrl+C which will kill off the main ghettoVCB instance
Step 2 - Search for any existing ghettoVCB process by running the following:
# ps -c | grep ghettoVCB | grep -v grep
3360136 3360136 tail tail -f /tmp/ghettoVCB.work/ghettovcb.Cs1M1x
Step 3 - Here we can see there is a tail command that was used in the script. We need to stop this process by using the kill command which accepts the PID (Process ID) which is identified by the first value on the far left hand side of the command. In this example, it is 3360136.
# kill -9 3360136
Note: Make sure you identify the correct PID, else you could accidently impact a running VM or worse your ESXi host.
Step 4 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Step 1 - Search for the ghettoVCB process (you can also validate the PID from the logs)
~ # ps -c | grep ghettoVCB | grep -v grep
3360393 3360393 busybox ash ./ghettoVCB.sh -f list -d debug
3360790 3360790 tail tail -f /tmp/ghettoVCB.work/ghettovcb.deGeB7
Step 2 - Stop both the main ghettoVCB instance & tail command by using the kill command and specifying their respective PID IDs:
kill -9 3360393
kill -9 3360790
Step 3 - If a VM was in the process of being backed up, there is an additional process for the actual vmkfstools copy. You will need to identify the process for that and kill that as well. We will again use ps -c command and search for any vmkfstools that are running:
# ps -c | grep vmkfstools | grep -v grep
3360796 3360796 vmkfstools /sbin/vmkfstools -i /vmfs/volumes/himalaya-temporary/VC-Windows/VC-Windows.vmdk -a lsilogic -d thin /vmfs/volumes/test-dont-use-this-volume/backups/VC-Windows/VC-Windows-2013-01-26_16-45-35/VC-Windows.vmdk
Step 4 - In case there is someone manually running a vmkfstools, make sure you take a look at the command itself and that it maps back to the current VM that was being backed up before kill the process. Once you have identified the proper PID, go ahead and use the kill command:
# kill -9 3360796
Step 5 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Please take a moment to read over what is a cronjob and how to set one up, before continuing
The task of configuring cronjobs on classic ESX servers (with Service Console) is no different than traditional cronjobs on *nix operating systems (this procedure is outlined in the link above). With ESXi on the other hand, additional factors need to be taken into account when setting up cronjobs in the limited shell console called Busybox because changes made do not persist through a system reboot. The following document will outline steps to ensure that cronjob configurations are saved and present upon a reboot.
Important Note: Always redirect the ghettoVCB output to /dev/null and/or to a log when automating via cron, this becomes very important as one user has identified a limited amount of buffer capacity in which once filled, may cause ghettoVCB to stop in the middle of a backup. This primarily only affects users on ESXi, but it is good practice to always redirect the output. Also ensure you are specifying the FULL PATH when referencing the ghettoVCB script, input or log files.
e.g.
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /dev/null
or
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /tmp/ghettoVCB.log
Task: Configure ghettoVCB.sh to execute a backup five days a week (M-F) at 12AM (midnight) everyday and send output to a unique log file
Configure on ESX:
1. As root, you'll install your cronjob by issuing:
[root@himalaya ~]# crontab -e
2. Append the following entry:
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
3. Save and exit
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -e
no crontab for root - using an empty one
crontab: installing new crontab
4. List out and verify the cronjob that was just created:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -l
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
You're ready to go!
Configure on ESXi:
1. Setup the cronjob by appending the following line to /var/spool/cron/crontabs/root:
0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-$(date +\%s).log
If you are unable to edit/modify /var/spool/cron/crontabs/root, please make a copy and then edit the copy with the changes
cp /var/spool/cron/crontabs/root /var/spool/cron/crontabs/root.backup
Once your changes have been made, then "mv" the backup to the original file. This may occur on ESXi 4.x or 5.x hosts
mv /var/spool/cron/crontabs/root.backup /var/spool/cron/crontabs/root
You can now verify the crontab entry has been updated by using "cat" utility.
2. Kill the current crond (cron daemon) and then restart the crond for the changes to take affect:
On ESXi < 3.5u3
kill $(ps | grep crond | cut -f 1 -d ' ')
On ESXi 3.5u3+
~ # kill $(pidof crond)
~ # crond
On ESXi 4.x/5.0
~ # kill $(cat /var/run/crond.pid)
~ # busybox crond
On ESXi 5.1 to 6.x
~ # kill $(cat /var/run/crond.pid)
~ # crond
On ESXi 7.x
~ # kill $(cat /var/run/crond.pid)
~ # /usr/lib/vmware/busybox/bin/busybox crond
3. Now that the cronjob is ready to go, you need to ensure that this cronjob will persist through a reboot. You'll need to add the following two lines to /etc/rc.local (ensure that the cron entry matches what was defined above). In ESXi 5.1, you will need to edit /etc/rc.local.d/local.sh instead of /etc/rc.local as that is no longer valid.
On ESXi 3.5
/bin/kill $(pidof crond)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 4.x/5.0
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
On ESXi 5.1 to 6.x
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 7.x
/bin/kill $(cat /var/run/crond.pid) > /dev/null 2>&1
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/usr/lib/vmware/busybox/bin/busybox crond
Afterwards the file should look like the following:
~ # cat /etc/rc.local
#! /bin/ash
export PATH=/sbin:/bin
log() {
echo "$1"
logger init "$1"
}
#execute all service retgistered in /etc/rc.local.d
if [http:// -d /etc/rc.local.d |http:// -d /etc/rc.local.d ]; then
for filename in `find /etc/rc.local.d/ | sort`
do
if [ -f $filename ] && [ -x $filename ]; then
log "running $filename"
$filename
fi
done
fi
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
This will ensure that the cronjob is re-created upon a reboot of the system through a startup script
2. To ensure that this is saved in the ESXi configuration, we need to manually initiate an ESXi backup by running:
~ # /sbin/auto-backup.sh
config implicitly loaded
local.tgz
etc/vmware/vmkiscsid/vmkiscsid.db
etc/dropbear/dropbear_dss_host_key
etc/dropbear/dropbear_rsa_host_key
etc/opt/vmware/vpxa/vpxa.cfg
etc/opt/vmware/vpxa/dasConfig.xml
etc/sysconfig/network
etc/vmware/hostd/authorization.xml
etc/vmware/hostd/hostsvc.xml
etc/vmware/hostd/pools.xml
etc/vmware/hostd/vmAutoStart.xml
etc/vmware/hostd/vmInventory.xml
etc/vmware/hostd/proxy.xml
etc/vmware/ssl/rui.crt
etc/vmware/ssl/rui.key
etc/vmware/vmkiscsid/initiatorname.iscsi
etc/vmware/vmkiscsid/iscsid.conf
etc/vmware/vmware.lic
etc/vmware/config
etc/vmware/dvsdata.db
etc/vmware/esx.conf
etc/vmware/license.cfg
etc/vmware/locker.conf
etc/vmware/snmp.xml
etc/group
etc/hosts
etc/inetd.conf
etc/rc.local
etc/chkconfig.db
etc/ntp.conf
etc/passwd
etc/random-seed
etc/resolv.conf
etc/shadow
etc/sfcb/repository/root/interop/cim_indicationfilter.idx
etc/sfcb/repository/root/interop/cim_indicationhandlercimxml.idx
etc/sfcb/repository/root/interop/cim_listenerdestinationcimxml.idx
etc/sfcb/repository/root/interop/cim_indicationsubscription.idx
Binary files /etc/vmware/dvsdata.db and /tmp/auto-backup.31345.dir/etc/vmware/dvsdata.db differ
config implicitly loaded
Saving current state in /bootbank
Clock updated.
Time: 20:40:36 Date: 08/14/2009 UTC
Now you're really done!
If you're still having trouble getting the cronjob to work, ensure that you've specified the correct parameters and there aren’t any typos in any part of the syntax.
Ensure crond (cron daemon) is running:
ESX 3.x/4.0:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# ps -ef | grep crond | grep -v grep
root 2625 1 0 Aug13 ? 00:00:00 crond
ESXi 3.x/4.x/5.x:
~ # ps | grep crond | grep -v grep
5196 5196 busybox crond
Ensure that the date/time on your ESX(i) host is setup correctly:
ESX(i):
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# date
Fri Aug 14 23:44:47 PDT 2009
Note: Careful attention must be noted if more than one backup is performed per day. Backup windows should be staggered to avoid contention or saturation of resources during these periods.
0Q: I'm getting error X when using the script or I'm not getting any errors, the backup didn’t even take place. What can I do?
0A: First off, before posting a comment/question, please thoroughly read through the ENTIRE documentation including the FAQs to see if your question has already been ansered.
1Q: I've read through the entire documentation + FAQs and still have not found my answer to the problem I'm seeing. What can I do?
1A: Please join the ghettoVCB Group to post your question/comment.
2Q: I've sent you private message or email but I haven't received a response? What gives?
2A: I do not accept issues/bugs reported via PM or email, I will reply back, directing you to post on the appropriate VMTN forum (that's what it's for). If the data/results you're providing is truely senstive to your environment I will hear you out, but 99.99% it is not, so please do not messsage/email me directly. I do monitor all forums that contain my script including the normal VMTN forums and will try to get back to your question as soon as I can and as time permits. Please do be patient as you're not the only person using the script (600,000+ views), thank you.
3Q: Can I schedule backups to take place hourly, daily, monthly, yearly?
3A: Yes, do a search online for crontab.
4Q: I would like to setup cronjob for ESX(i) 3.5 or 4.0?
4A: Take a look at the Cronjob FAQ section in this document.
5Q: I want to schedule my backup on Windows, how do I do this?
5A: Do a search for plink. Make sure you have paired SSH keys setup between your Windows system and ESX/ESXi host.
6Q: I only have a single ESXi host. I want to take backups and store them somewhere else. The problem is: I don't have NFS, iSCSI nor FC SAN. What can I do?
6A: You can use local storage to store your backups assuming that you have enough space on the destination datastore. Afterwards, you can use scp (WinSCP/FastSCP) to transfer the backups from the ESXi host to your local desktop.
7Q: I’m pissed; the backup is taking too long. My datastore is of type X?
7A: YMMV, take a look at your storage configuration and make sure it is optimized.
8Q: I noticed that the backup rotation is occurring after a backup. I don't have enough local storage space, can the process be changed?
8A: This is primarily done to ensure that you have at least one good backup in case the new backup fails. If you would like to modify the script, you're more than welcome to do so.
9Q: What is the best storage configuration for datastore type X?
9A: Search the VMTN forums; there are various configurations for the different type of storage/etc.
10Q: I want to setup an NFS server to run my backups. Which is the best and should it be virtual or physical?
10A: Please refer to answer 7A. From experience, we’ve seen physical instances of NFS servers to be faster than their virtual counterparts. As always, YMMV.
11Q: I have VMs that have snapshots. I want to back these things up but the script doesn’t let me do it. How do I fix that?
11A: VM snapshots are not meant to be kept for long durations. When backing up a VM that contains a snapshot, you should ensure all snapshots have been committed prior to running a backup. No exceptions will be made…ever.
12Q: I would like to restore from backup, what is the best method?
12A: The restore process will be unique for each environment and should be determined by your backup/recovery plans. At a high level you have the option of mounting the backup datastore and registering the VM in question or copy the VM from the backup datastore to the ESX/ESXi host. The latter is recommended so that you're not running a VM living on the backup datastore or inadvertently modifying your backup VM(s). You can also take a look at ghettoVCB-restore which is experimentally supported.
13Q: When I try to run the script I get: "-bash: ./ghettoVCB.sh: Permission denied", what is wrong?
13A: You need to change the permission on the script to be executable, chmod +x ghettoVCB.sh
14Q: Where can I download the latest version of the script?
14A: The latest version is available on on github - https://github.com/lamw/ghettoVCB/downloads
15Q: I would like to suggest/recommend feature X, can I get it? When can I get it? Why isn't it here, what gives?
15A: The general purpose of this script is to provide a backup solution around VMware VMs. Any additional features outside of that process will be taken into consideration depending on the amount of time, number of requests and actual usefulness as a whole to the community rather than to an individual.
16Q: I have found this script to be very useful and would like to contribute back, what can I do?
16A: To continue to develop and share new scripts and resources with the community, we need your support. You can donate here Thank You!
17Q: What are the different type of backup uses cases that are supported with ghettoVCB?
17A: 1) Live backup of VM with the use of a snapshot and 2) Offline backup of a VM without a snapshot. These are the only two use cases supported by the script.
18Q: When I execute the script on ESX(i) I get some funky errors such as ": not found.sh" or "command not found". What is this?
18A: Most likely you have some ^M characters within the script which may have come from either editing the script using Windows editor, uploading the script using the datastore browser OR using wget. The best option is to either using WinSCP on Windows to upload the script and edit using vi editor on ESX(i) host OR Linux/UNIX scp to copy the script into the host. If you still continue to have the issue, do a search online on various methods of removing this Windows return carriage from the script
19Q: My backup works fine OR it works for a single backup but I get an error message "Input/output error" or "-ash: YYYY-MM-DD: not found" during the snapshot removal process. What is this?
19A: The issue has been recently identified by few users as a problem with user's NFS server in which it reports an error when deleting large files that take longer than 10seconds. VMware has recently released a KB article http://kb.vmware.com/kb/1035332 explaining the details and starting with vSphere 4.1 Update 2 or vSphere 5.0, a new advanced ESX(i) parameter has been introduced to increase the timeout. This has resolved the problem for several users and maybe something to consider if you are running into this issue, specifically with NFS based backups.
20Q: Will this script function with vCenter and DRS enabled?
20Q: No, if the ESX(i) hosts are in a DRS enabled cluster, VMs that are to be backed up could potentially be backed up twice or never get backed up. The script is executed on a per host basis and one would need to come up a way of tracking backups on all hosts and perhaps write out to external file to ensure that all VMs are backed up. The main use case for this script are for standalone ESX(i) host
21Q: I'm trying to use WinSCP to manually copy VM files but it's very slow or never completes on huge files, why is that?
21A: WinSCP was not designed for copying VM files out of your ESX(i) host, take a look at Veeam's FastSCP which is designed for moving VM files and is a free utility.
22Q: Can I use setup NFS Server using Windows Services for UNIX (WSFU) and will it work?
22A: I've only heard a handful of users that have successfully implemented WSFU and got it working, YMMV. VMware also has a KB article decribing the setup process here: http://kb.vmware.com/kb/1004490 for those that are interested. Here is a thread on a user's experience between Windows Vs. Linux NFS that maybe helpful.
23Q: How do VMware Snapshots work?
23A: http://kb.vmware.com/kb/1015180
24Q: What files make up a Virtual Machine?
24A: http://virtualisedreality.wordpress.com/2009/09/16/quick-reminder-of-what-files-make-up-a-virtual-ma...
25Q: I'm having some issues restoring a compressed VM backup?
25A: There is a limitation in the size of the VM for compression under ESXi 3.x & 4.x, this limitation is in the unsupported Busybox console and should not affect classic ESX 3.x/4.x. On ESXi 3.x, the maximum largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
26Q: I'm backing up my VM as "thin" format but I'm still not noticing any size reduction in the backup? What gives?
2bA: Please refer to this blog post which explains what's going on: http://www.yellow-bricks.com/2009/07/31/storage-vmotion-and-moving-to-a-thin-provisioned-disk/
27Q: I've enabled VM_SNAPSHOT_MEMORY and when I restore my VM it's still offline, I thought this would keep it's memory state?
27A: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relavent to the actual snapshot itself and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
28Q: Can I rename the directories and the VMs after a VM has been backed up?
28A: The answer yes, you can ... but you may run into all sorts of issues which may break the backup process. The script expects a certain layout and specific naming scheme for it to maintain the proper rotation count. If you need to move or rename a VM, please take it out of the directory and place it in another location
29Q: Can ghettoVCB support CBT (Change Block Tracking)?
29A: No, that is a functionality of the vSphere API + VDDK API (vSphere Disk Development Kit). You will need to look at paid solutions such as VMware vDR, Veeam Backup & Recovery, PHD Virtual Backups, etc. to leverage that functionailty.
30Q: Does ghettoVCB support rsync backups?
30A: Currently ghettoVCB does not support rsync backups, you either obtain or compile your own static rsync binary and run on ESXi, but this is an unsupported configuration. You may take a look at this blog post for some details.
31Q: How can I contribute back?
31A: You can provide feedback/comments on the ghettoVCB Group. If you have found this script to be useful and would like to contribute back, please click here to donate.
32Q: How can select individual VMDKs to backup from a VM?
32A: Ideally you would use the "-c" option which requires you to create individual VM configuration file, this is where you would select specific VMDKs to backup. Note, that if you do not need to define all properties, anything not defined will adhere from the default global properties whether you're editing the ghettoVCB.sh script or using ghettoVCB global configuration file. It is not recommended that you edit the ghettoVCB.sh script and modify the VMDK_FILES_TO_BACKUP variable, but if you would like to keep everything in one script, you may add the extensive list of VMDKs to backup but do know this can get error prone as script may be edited frequently and lose some flexibility to support multiple environments.
33Q: Why is email not working when I'm using ESXi 5.x but it worked in ESXi 4.x?
33A: ESXi 5.x has implemented a new firewall which requires the email port that is being used to be opened. Please refer to the following articles on creating a custom firewall rule for email:
http://www.virtuallyghetto.com/2012/09/creating-custom-vibs-for-esxi-50-51.html
How to Create Custom Firewall Rules in ESXi 50
How to Persist Configuration Changes in ESXi 4.x/5.x Part 1
How to Persist Configuration Changes in ESXi 4.x/5.x Part 2
34Q: How do I stop the ghettoVCB process?
34A: Take a look at the Stopping ghettoVCB Process section of the documentation for more details.
Many have asked what is the best configuration and recommendation for setting up a cheap NFS Server to run backups for VMs. This has been a question we've tried to stay away from just because the possiblities and solutions are endless. One can go with physical vs. virtual, use VSA (Virtual Storage Appliances) such as OpenFiler or Lefthand Networks, Windows vs. Linux/UNIX. We've not personally tested and verify all these solutions and it all comes down to "it depends" type of answer. Though from our experience, we've had much better success with a physical server than a virtual.
It is also well known that some users are experiencing backup issues when running specifically against NFS, primarily around the rotation and purging of previous backups. The theory from what we can tell by talking to various users is that when the rotation is occuring, the request to delete the file(s) may take awhile and does not return within a certain time frame and causes the script to error out with unexpected messages. Though the backups were successful, it will cause unexpected results with directory structures on the NFS target. We've not been able to isolate why this is occuring and maybe due to NFS configuration/exports or hardware or connection not being able to support this process.
We'll continue to help where we can in diagonising this issus but we wanted to share our current NFS configuration, perhaps it may help some users who are new or trying to setup their system. ( Disclaimer: These configurations are not recommendations nor endorsement for any of the components being used)
UPDATE: Please also read FAQ #19 for details + resolution
Server Type: Physical
Model: HP DL320 G2
OS: Arch linux 2.6.28
Disks: 2 x 1.5TB
RAID: Software RAID1
Source Host Backups: ESX 3.5u4 and ESX 4.0u1 (We don't run any ESXi hosts)
uname -a output
Linux XXXXX.XXXXX.ucsb.edu 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686 Intel(R) Pentium(R) 4 CPU 3.06GHz GenuineIntel GNU/Linux
NICs:
00:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
00:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
NFS Export Options:
/exports/vm-backups XXX.XXX.XXX.XXX/24(rw,async,all_squash,anonuid=99,anongid=99)
*One important thing to check is to verify that your NFS exportion options are setup correctly, "async" should be configured to ensure that all IO requests are processed and reply back to the client before waiting for the data to be written to the storage.
*Recently VMware released a KB article describing the various "Advanced NFS Options" and their meanings and recommendations: http://kb.vmware.com/kb/1007909 We've not personally had to touch any of these, but for other vendors such as EMC and NetApp, there are some best practices around configuring some of these values depending on the number of NFS volumes or number of ESX(i) host connecting to a volume. You may want to take a look to see if any of these options may help with NFS issue that some are seeing
*Users should also try to look at their ESX(i) host logs during the time interval when they're noticing these issues and see if they can find any correlation along with monitoring the performance on their NFS Server.
*Lastly, there are probably other things that can be done to improve NFS performance or further optimization, a simple search online will also yield many resources.
Windows utility to email ghettoVCB Backup Logs - http://www.waldrondigital.com/2010/05/11/ghettovcb-e-mail-rotate-logs-batch-file-for-vmware/
Windows front-end utility to ghettoVCB - http://www.magikmon.com/mkbackup/ghettovcb.en.html
Note: Neither of these tools are supported, for questions or comments regarding these utilities please refer to the author's pages.
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
Enhancements:
Fixes:
Big thanks to Alain Spineux and his contributions to the ghettoVCB script and helping with debugging and testing.
Enhancements:
Fixes:
Enhancements:
Enhancements:
Enhancements:
Fixes:
Fixes:
Enhancements:
Fixes:
Fixes:
Big thanks goes out to the community for the suggested features and to those that submitted snippet of their modifications.
Updated FAQ #20-24 for common issues/questions. Also included a new section about our "personal" NFS configuration and setup.
Fix the crontab section to reflect the correct syntax + updated FAQ #17,#18 and #19 for common issues.
The following enhancements and fixes have been implemented in this release of ghettoVCB. Special thanks goes out to all the ghettoVCB BETA testers for providing time and their environments to test features/fixes of the new script!
Enhancements:
Fixes:
hi:
thanks for your great script!
i use ghettoVCB.sh under ESX 3.5i u4 with live snapshot(no shutdown before snapshot).
i wonder if it is a quiesced snapshot? i can not find information about the command "svmvc/snapshot.create".
i hope MS-SQL server with vmwaretools would be happy with the snapshot.
can you give me some advice?
thanks for your help!!
Regards,
sky_li
Hi,
I'm confused about the versions of this script. The version I downloaded today from the link in the "attachments" section of this page (or from "http://engineering.ucsb.edu/~duonglt/vmware/") is 11/01/2008:
#!/bin/bash
Author: william2003[at]gmail[dot]com
Date: 11/01/2008
the "CHANGELOG" section lists a version of the script (11/22/2008) that detects existing snapshots and RDMs: where can download it?
Thanks
Guido
hi:
the author didn't modify the change log. but they are the latest version and can detect existing snapshot. i have tried that.
the attachment and the script at author's website is different files. but after filtering all the white spaces, they are the same.
Hi sky_li,
If you're running hight transactional databases, it's generally not recommended to use snapshots for backups due to transactions occurring within a DB. There is something called VSS which is available within VMware Tools that makes the guest aware that a snapshot is going to occur and it forces all data to be flushed from memory to disk, I've not used this personally and I believe it may only be available when VMware VCB is called, Duncan has an article at http://www.yellow-bricks.com/2008/07/26/vss-snapshots/
I would probably stay away from taking VMware snapshots and rely on database snapshots.
In terms of vimsh wrapper for creating snapshots, you won't find much information on any of the commands as these are not officially supported by VMware even though it provides a slew of advanced functionality.
You can always run the following for some basic info:
[root@himalaya scripts]# vmware-vim-cmd vmsvc/snapshot.create Insufficient arguments. Usage: snapshot.create vmid [snapshotName] [snapshotDescription] [includeMemory] Creates a snapshot for the vm.
Where the includeMemory accepts a boolean
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please award points for "correct" or "helpful".
Hi Guido,
As tbsky stated, the latest script is currently available for download on this page. The date within the script may be a little miss-leading, it's actually the date that I started develoment of the script. The chanelog on the other hand is accurate in terms of the changes that have taken place since the release of the script and again the latest download will always be available on the VMTN document download page.
I'll ensure that both the script on the VMTN and on our website is the same, sorry for any confusion
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please award points for "correct" or "helpful".
Hi Guido,
As tbsky stated, the latest script is currently available for download on this page. The date within the script may be a little miss-leading, it's actually the date that I started develoment of the script. The chanelog on the other hand is accurate in terms of the changes that have taken place since the release of the script and again the latest download will always be available on the VMTN document download page.
I'll ensure that both the script on the VMTN and on our website is the same, sorry for any confusion
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please award points for "correct" or "helpful".
hello lamw
I ve got a server to backup which has only space for one backup at a time. Now your
script does first the backup and then rotates/deletes the old backups. This means, in
some time during the backup there are to backups on the disc...
Would it be possible to just move the "rotate"-function to the beginning of your script
and do the backup after rotating/deleting the old backups? Or can you see any problems?
Thank you,
ibhp
hi lamw:
i am just curios. "quiesced windows snapshot" seems become complete at 3.5 update 2 with sync+vss driver. but the link you give me tell us stay away from exchange,ad,sql. then i don't know what this "quiesce" function for.
also there seems some version of snapshot command line have "quiesce" option, like the link mentioned:
but it seems the new command line version didn't have the "quiesce" parameter, only "memory" option is left. i wonder if the snapshot is quiesced automatically now, or the option is because "quiesced" may bring problems.
someone said that if you do a "quiesced snapshot", ms-sql log will tell you.i haven't any real ms-sql server running in the vm now. maybe i can check that in the future.
The reason I put the rotate function after the backup is to ensure we have a good backup prior to rotation, especially in the case of just rotating once. I would say please ensure that you have sufficient space for all backups
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please award points for "correct" or "helpful".
Yea I'm not too familiar with the expected behavior of VSS other than asking the VM to flush its data from memory to disk. I just know from reading on the VMTN forums from other experts it's not recommended to using VMware snapshots on VM(s) like databases and if you do, you'll need to look into VSS which is only available per VMware VCB (I think). You may need to run a few tests to see the behavior and I would actually recommend posting a question regarding this on the main VMTN forum and I'm sure an expert familiar with the process can provide further insight.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please award points for "correct" or "helpful".
Hi lamw,
First of all, thx for this great script! I have a question though and hope that the following might also be possible with your script: can you specify a vmdk within a vm that you want to backup? I would like to backup only one vmdk of a vm that is on the same datastore. So basically I want to exclude all the other vmdk's that are attached to this vm and stored on a different datastore. Is this possible?
Thank you,
Pietcur
Specific VMDK disk(s) backups are not supported, only full backups. You're more than welcome to modify the script to fit your needs.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please award points for "correct" or "helpful".
hi:
i am considering put all the windows pagefile and linux swap file to a separate vmdk file. so i can skip backing up them in the future. would you consider implement this feature? or would you consider receive patch?
thanks for your help!!
Thanks for the script.
Shouldn't the script bypass the creation of a snapshot if the guest is in a powered down state? Seems like extra work to take a snapshot and then merge the snapshot back into the base when the machine is already static.
Also, I got the following error while backing up a guest that was powered off:
/vmfs/volumes/datastore1/scripts # ./ghettoVCB.sh single_vm
Taking backup snapshot for Windows XP 32bit Base ... ################
DiskLib_Check() failed for source disk Insufficient permission to access file (38).
Destination disk format: VMFS thick
Cloning disk '/vmfs/volumes/Development/Windows XP 32bit Base/winxp-32bit-base.vmdk'...
Clone: 16% done.
The clone appears to have worked, however out of all the guests that I backed up, that was the only one that echoed the DiskLib_Check() message.
I notice that the script also doesn't appear to take into consideration whether or not a vmdk is thinly provisioned. (as previously mentioned by ddigioia)
I could alter the command:
vmkfstools -i "$" "$" to vmkfstools -i "$" -d thin "$"
But:
a) is there a way for the script to identify if a vmdk is thin, and if so add '-d thin'
b) is there any danger in storing thin clones? maybe why the script doesn't already do the previous
You know I think this was something I had missed when dealing with the option of allowing a user to configure the shutdown of a guest, I think I might have forgotten to take into consideration the current state of the VM. You're right, this may be a bug. Majority of the user's I've spoke to that have used the script are running live backups and would not run into the issue, but it's a good point and I'll ensure the next update of the script is fixed.
Thanks for bringing it to my attention
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please award points for "correct" or "helpful".
At the time, we were not looking at using thin provision backups, it does not hurt and provides optimized storage consumption (hence probably why vSphere officially supports it now)
Your modifications will work and thinly provision disks upon backup, also a note when you're backing up to NFS datastore, it'll automatically thin provision the disk for you AFAIK
a) You can look at the descriptor file and you'll find a line that says: ddb.thinProvisioned = "1"
b) In terms of backup, there is are no dangers, better storage utilization. In terms of running thin provision VM(s), you just need to be aware of your storage utilization and with ESX 3.5, there are not sufficient monitoring on the datastores to notify you as VM(s) start to fill up, with vSphere there are better notifications/reports.
In an upcoming release of the script all 3 backup types will be supported zeroedthick, thin and 2gb sparse
Thanks for the comments
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please award points for "correct" or "helpful".
hi:
please consider add "monolithic sparse" also. with that you get a small,single vmdk file.
backup tools like rdiff-backup can compare two versions for a file and only backup the difference.
with "monolithic sparse" single vmdk file, backup tools can easily backup many versions of vms with little harddisk space.
Hello community
I have a win2k3 server running on a ESXi-host with 2 virtual harddrives attached. Now one time the backup runs correct (backing up both virtual harddrives) and the other time it backs-up only the first virtual harddrive (every second time only one virtual hdd is backed-up). This looks like this:
Failure:
Destination disk format: VMFS thick
Cloning disk '/vmfs/volumes/First_750GB_HD/Win2K3 TS/Win2K3 TS_1.vmdk'...
Destination disk format: VMFS thick
Cloning disk '/vmfs/volumes/First_750GB_HD/Win2K3 TS/Win2K3 TS.vmdk'...
Clone: 100% done.
*******************************
Success:
Destination disk format: VMFS thick
Cloning disk '/vmfs/volumes/First_750GB_HD/Win2K3 TS/Win2K3 TS_1.vmdk'...
Clone: 100% done.
Destination disk format: VMFS thick
Cloning disk '/vmfs/volumes/First_750GB_HD/Win2K3 TS/Win2K3 TS.vmdk'...
Clone: 100% done.
*******************************
Any idea what this could be caused from?
Thanks for any help!
Hi everyone,
We're proud to announce the release of ghettoVCBg2 the next gen of ghettoVCB. You can find more information located at: http://communities.vmware.com/docs/DOC-9843
Hope you guys like it!
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please award points for "correct" or "helpful".
I've just upgraded my ESXi from 3.5 to 4.0 and the old ghetto script doesn't work.
Infact if I connect with putty and launch the script:
./ghettoVCB.sh weekly
I receive
-ash: ./ghettoVCB.sh: not found
I can't use the new script ghetto2 because I have the free version of ESXi
Can someone help me?
ghettoVCB has not been tested/certified for ESX(i) 4.0, we've been pretty busy and just have not had the time to test. This holds true for variety of other scripts and some will fail due to changes in vSphere release. In general, I think the script should work and it does not utilize anything that is not already available in ESXi 4.0, make sure the permissions on your script is set to executable. I'll try to do a quick run tonight and post back.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
The error is telling you that ghettoVCB.sh doesn't exist in your current directory.
Was your ghettoVCB.sh script on a datastore or on one of the OS file systems? If it wasn't on a datastore, the version 4 upgrade probably wiped it.
Copy it back to a datastore and execute it from there and see if it will work with v4.
Okay, just got ESXi 4.0 installed as a VM on our ESX 4 (physical) and I see the problem, looks like there was some change to their shell environment and if you didn't know the busybox console runs on ash ... kinda like bash. It looks like it has a problem when you try to do the following:
./ghettoVCB.sh -ash: ./ghettoVCB.sh: not found
clearly, I can see the script is in the current directory.
The workaround is the following:
1) Edit the script and change the top line to:
#!/bin/ash
OR
2) execute with the ash interpreter:
ash ./ghettoVCB.sh
Give this a go and it should work, in terms of the actual backup ... I have not verified, so let me know if this works. In the coming weeks, will be verifying some of older scripts and release updates for ESX(i) 4.0 if necessary.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Ok now I can launch the script but I have these errors:
/vmfs/volumes/48c6a14e-37156b78-c647-001a925eca7c # ash ./ghettoVCB.sh weekly
Error: failed to extract VM_ID for 2008Termi!
Error: failed to extract VM_ID for al
Assiste!
Error: failed to extract VM_ID for zaVista2!
Start time: Wed May 27 06:51:45 UTC 2009
End time: Wed May 27 06:51:48 UTC 2009
Duration : 3 Seconds
Completed backing up specified Virtual Machines!
I ran a quick test earlier and realized some of the code may need to be updated. I have not had a chance to dig further on what needs to be modified.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Have you had a chance to try out ghettoVCB4i.sh to see if the issues are resolved?
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Thanks for the great script. I finally have an option for backing up my ESXi (free) 4 VMs. I downloaded ghettoVCB4i.sh and attempted to use it but encountered a problem where all of my VMs with the letter 'n' in the name where causing an error. This is similar to the issue described by freez267 above. I don't fully understand why but commenting out the line
IFS=$'\n'
appeared to resolve the issue for me. I am not sure what this line does.
Thanks
Tony Russell
That's odd... it should work, I've verified on our ESXi 4 system.
IFS=$'\n'
Is called the Internal Field Separator:
http://en.wikipedia.org/wiki/Internal_Field_Separator
http://learnlinux.tsf.org.za/courses/build/shell-scripting/ch11s11.html
Basically when I loop through the list of VM(s) after some sanity checks and extracting out the VmId which is used in the vimsh to uniquely identify a VM, I'm also extracting the VM(s) displayName. When user's use white space in their VM names, by default the IFS is looking for a 'space' as a delimiter to denote the next line of data so a workaround is to redefine the IFS to look for a newline that way you can capture the line of text with spaces. In either cases it will not hurt if you don't have spaces in your VM name, but it'll only help if you do.
Again, I'm not exactly sure why you're having an issue since '\n' is representing a newline and not the 'n' char.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I am running this on ESXi 4. I have tried to follow the directions very closely but I keep getting a Permission Denied error every time I try to actually run the script. Any suggestions?
Did you change the permissions on the script to have executable permissions?
chmod +x ghettoVCB4i.sh
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I continue to have this error
Error: failed to extract VM_ID
On the VMs that have 'n' in the name. For example is impossible to backup the VM '2008Terminal' and 'AssistenzaXp' but no problem with 'W7RC'
I just created some dummy VM(s) using the names you've specified and it looks like the environment is not treating $'\n' as a newline char but the literal char 'n'. This cause the loop to break off once it sees the first char 'n' and a VM with the name: "2008Terminal" will be chompped into "2008Termin" and "al" which neither of which will match, hence it fails. If you specify a list of VM(s) w/o 'n' then the backup is successful. This is pretty odd and I'll have to look into it some more.
You said if you remove the IFS=$'\n', everything works?
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
That is exactly what happened in my case. If I commented out that line, it worked fine.
Looks like the newline needs to be defined in the following manner:
IFS=' '
notice where the single tick starts and ends which is on the following line. If you make this modification, it will backup all 3 VM(s) properly .... I'll push an update out tonight, it looks like the new Busybox ash environment may have been slightly changed and does not recognize $'\n' as a newline. The real reason for redefining the IFS is for VM(s) names that may contain spaces, which I consider a bad practice...but if you know your naming convention will never have spaces,tabs,etc...then you should be fine.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi,
Thanks for a fantastic script. Works well, but I have a problem with the rotation. Anyone with a clue why it won't work? See output from a sh -x command (last bit):
Cloning disk '/vmfs/volumes/HB-ESXi2-scsi1/HB-Label/HB-Label.vmdk'...
Clone: 100% done.
+ IFS=
+ /bin/vim-cmd vmsvc/snapshot.remove 256
+ echo Removing snapshot from HB-Label ...
+ ls /vmfs/volumes/HB-ESXi2-scsi1/HB-Label
+ grep -q delta
+ sleep 3
+ ls /vmfs/volumes/HB-ESXi2-scsi1/HB-Label
+ grep -q delta
+ sleep 3
+ ls /vmfs/volumes/HB-ESXi2-scsi1/HB-Label
+ grep -q delta
+ checkVMBackupRotation /vmfs/volumes/Thecus/Backup/HB-Label /vmfs/volumes/Thecus/Backup/HB-Label/HB-Label-2009-06-07
+ local BACKUP_DIR_PATH=/vmfs/volumes/Thecus/Backup/HB-Label
+ local BACKUP_VM_NAMING_CONVENTION=/vmfs/volumes/Thecus/Backup/HB-Label/HB-Label-2009-06-07
+ ls -tr /vmfs/volumes/Thecus/Backup/HB-Label
+ LIST_BACKUPS=HB-Label-2009-05-31
HB-Label-2009-06-05
HB-Label-2009-06-07
+ TMP_DIR=/vmfs/volumes/Thecus/Backup/HB-Label/HB-Label-2009-05-31
+ echo /vmfs/volumes/Thecus/Backup/HB-Label/HB-Label-2009-05-31
+ TMP=/vmfs/volumes/Thecus/Backup/HB-Label/HB-Label-2009-05-31
sh: /vmfs/volumes/Thecus/Backup/HB-Label/HB-Label-2009-05-31: bad number
+ echo /vmfs/volumes/Thecus/Backup/HB-Label/HB-Label-2009-05-31
+ BASE=/vmfs/volumes/Thecus/Backup/HB-Label/HB-Label-2009-05-31
/vmfs/volumes/Thecus/Script/HB-Label/ghettoVCB.sh: /vmfs/volumes/Thecus/Script/HB-Label/ghettoVCB.sh: 340: Syntax error: /vmfs/volumes/Thecus/Backup/HB-Label/HB-Label-2009-05-31+1
/vmfs/volumes/46df116f-b561be9a/Log #
I have a few different VM's with different rotation counts (I keep several copies of the script). At least one does not delete when more than the rotation count, I suspect the problem above. Any clue anyone? Why syntax error etc?
I had a similiar Problem here an a ESX Server 3.5:
At first: Script works well from the Root-Shell...
But, when i Plan the Script via Crontab, the Script starts, make's the Snapshot, Backup the *.vmdk and *.vmx File in a newly created Folder BUT at the End of the Backup the Script don't rename the Folder in correct manner.
Script stopped working. I have to rename the Folders manually in correct Name und Numbers and have to remove the Snapshot manually from ESX Server's VI Client.
The Script only Backups the First VM in the Backup List and after Backup stopped working !
mfg
Ritchy059
I've running an ESXi 4.0 Server.
The backup does function well. But there is one problem wich is descibed by other persons above. It is the empty log file. Is there a solution for it or not? At the moment I see through all folders if the backup success. But that can't be the final solution.
Further the current version of ghettoVCB4i.sh runs great if there are no whitespaces in the vm name. Otherwise the rename after backup fails and because of that the backup rotation fails too. So I've removed all whitespaces in VM names like lamw describes as best practice
Thanks lamw for his great work... really really usefull script!!
For those interested in logging, maybe this helps you:
Run the script like this
sh ghettoVCB.sh vmlist.txt 2>&1 | busybox logger -t ghettoVCB -p 1
and then, push ESXi logs to a remote syslog-ng server.
Does this backup method copy the vmdk to the same vmfs volume and to get it offsite you would have to download the backup vmdk file from the datastore?
You could just mount a NFS volume and select that as the destination for the backup. That's what we do. Works great.
Quick question... I am running ghettoVCB.sh on ESXi 3.5 and its working great on most of my VMs. However I have a VM that seems to have a snapshot associated with it. I checked in the datastore, and there was a 'delta' file there. I powered down the VM and then deleted the delta file. Powered it back on, and then attempted to run ghettoVCB.sh. It again wouldn't do the backup because it said that there was a snapshot there. I checked it again, and the delta file had returned...
I know this isn't a specific question of ghettoVCB, but how do I get rid of these snapshots so I can do a clean backup of a live VM?
You shouldn't delete deltas by hand. Instead, remove snapshots from VIC.
Deltas track changes to the main vmdk, but information about snapshots are kept in vmsd files.
Unfortunately I only have my one ESXi box at home with 1 HDD in it and my desktop so I have no NFS volume to mount
So for me, does that mean that this script just backs up the running vmdk and I would need to manually download it?
If that is the case the primary function of the script would be to reduce downtime as otherwise I would need to power down the VM and copy the vmdk correct?
>So for me, does that mean that this script just backs up the running vmdk and I would need to manually download it?
What it basically does is a clone of the VM. The location of the cloned VM is up to you, and set in the script preferences. If you have NFS storage mounted and available to ESXi, then you can elect to use that as the storage location. Otherwise you'd have to store it in a local datastore somewhere. Once its done, then you can download it to offline storage using SCP or some other form of transport that you can support with ESXi.
>If that is the case the primary function of the script would be to reduce downtime as otherwise I would need to power down the VM and copy the vmdk correct?
You do not need to power down the VM to do the clone. The script will create a snapshot before it starts its processing and remove it when its completed it. You do have the option to power down the VM in the script, however, but by default it is turned off.
>You shouldn't delete deltas by hand. Instead, remove snapshots from VIC.
Deltas track changes to the main vmdk, but information about snapshots are kept in vmsd files.
Thanks. I found a way to remove the snapshots using VM Explorer's free edition (http://www.trilead.com). Works great.
Great script! Thank you so much... We are backing up 4 ESXi 3.5 servers successfully with about 6VMs each.
There is only one problem to backup a Debian Linux 60GB virtual harddisk. Snapshot seems to be OK. Backing up the disk (one of two) failed after some time with the following error message.
Taking backup snapshot for DEASX401 ... ################
Destination disk format: VMFS thick
Cloning disk '/vmfs/volumes/datastore1/DEASX401/DEASX401_2.vmdk'...
Clone: 79% done.Failed to clone disk : Insufficient permission to access file (38).
Destination disk format: VMFS thick
Cloning disk '/vmfs/volumes/datastore1/DEASX401/DEASX401.vmdk'...
Clone: 100% done.
Removing snapshot from DEASX401 ...
Completed backup for DEASX401! ####################
Start time: Wed Jul 1 06:45:27 UTC 2009
End time: Wed Jul 1 09:21:51 UTC 2009
Duration : 156.40 Minutes
Completed backing up specified Virtual Machines!
Might it be possible that the disk is to big? Is there any timeout?
Here some more information:
./ghettoVCB.sh is running with root account!
backup disk mouted vie NSF from a Win2003R2 server
share is an external 1GB USB disk
nsf shared folder is windows compressed (can save until 75% of original space)
Regards,
Bjoern
Hi !
Very great Job !
I try to use it under ESXi 4.0 (last release) but I encountered a problem. I logged it :
+ SOURCE_VMDK='/vmfs/volumes/Datastore 1/Fedora 9_Nagios_Centreon//usr/lib/vmware/isoimages/linux.iso'
+ DESTIONATION_VMDK='/vmfs/volumes/NFS_GED//Fedora 9_Nagios_Centreon/Fedora 9_Nagios_Centreon-2009-07-08//usr/lib/vmware/isoimages/linux.iso'
+ '[' 0 -eq 1 ']'
+ vmkfstools -i '/vmfs/volumes/Datastore 1/Fedora 9_Nagios_Centreon//usr/lib/vmware/isoimages/linux.iso' '/vmfs/volumes/NFS_GED//Fedora 9_Nagios_Centreon/Fedora 9_Nagios_Centreon-2009-07-08//usr/lib/vmware/isoimages/linux.iso'
DiskLib_Check() failed for source disk The system cannot find the file specified (25).
Someone could help me ?
Sorry for the delay of response but I've been extremely busy over the last month and I currently do not have the cycles to look into the current issues. I'm aware there are some interesting problems being faced that may all be related. I will provide some more details when I get a chance to take a look at the issue hopefully in a few weeks after my VCP4 exam. Thanks for your patience
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello lamw,
I used your script since a long time without problems (great work any many thanks), but yesterday we changed to esxi4.0 and I changed to your latest ghettovcb4.x version.
Like others I get this error:
+ vmkfstools -i /vmfs/volumes/5fbd225c-3cf7a7b1/xpsp2.iso /vmfs/volumes/iscsi2backupdsa1/backups/endiancfg/endiancfg-2009-07-13/5fbd225c-3cf7a7b1/xpsp2.iso/xpsp2.iso
DiskLib_Check() failed for source disk The file specified is not a virtual disk (15).
your script tries to backup the iso file of the cdrom. Why ? I there a way to disable it or is it only a bug ?
Also if the cdrom is a phys. cdrom of the host I get this disklib errors.
So my workaround now is to remove the complete cdrom from the vm hardware. Not nice but working.
The harddiskbackup is still working
Hope you will find a solution, because I check my backup logs automatically for the word failed and error and that
CDrom problem will prevent my autolog check from correct running.