This script performs backups of virtual machines residing on ESX(i) 3.5/4.x/5.x/6.x/7.x servers using methodology similar to VMware's VCB tool. The script takes snapshots of live running virtual machines, backs up the master VMDK(s) and then upon completion, deletes the snapshot until the next backup. The only caveat is that it utilizes resources available to the Service Console of the ESX server or Busybox Console (Tech Support Mode) of the ESXi server running the backups as opposed to following the traditional method of offloading virtual machine backups through a VCB proxy.
This script has been tested on ESX 3.5/4.x/5.x and ESXi 3.5/4.x/5.x/6.x/7.x and supports the following backup mediums: LOCAL STORAGE, SAN and NFS. The script is non-interactive and can be setup to run via cron. Currently, this script accepts a text file that lists the display names of virtual machine(s) that are to be backed up. Additionally, one can specify a folder containing configuration files on a per VM basis for granular control over backup policies.
Additionally, for ESX(i) environments that don't have persistent NFS datastores designated for backups, the script offers the ability to automatically connect the ESX(i) server to a NFS exported folder and then upon backup completion, disconnect it from the ESX(i) server. The connection is established by creating an NFS datastore link which enables monolithic (or thick) VMDK backups as opposed to using the usual *nix mount command which necessitates breaking VMDK files into the 2gbsparse format for backup. Enabling this mode is self-explanatory and will evidently be so when editing the script (Note: VM_BACKUP_VOLUME variable is ignored if ENABLE_NON_PERSISTENT_NFS=1 ).
In its current configuration, the script will allow up to 3 unique backups of the Virtual Machine before it will overwrite the previous backups; this however, can be modified to fit procedures if need be. Please be diligent in running the script in a test or staging environment before using it on production live Virtual Machines; this script functions well within our environment but there is a chance that it may not fit well into other environments.
If you have any questions, you may post in the dedicated ghettoVCB VMTN community group.
If you have found this script to be useful and would like to contribute back, please click here to donate.
Please read ALL documentation + FAQ's before posting a question about an issue or problem. Thank You
1) Download ghettoVCB from github by clicking on the ZIP button at the top and upload to either your ESX or ESXi system (use scp or WinSCP to transfer the file)
2) Extract the contents of the zip file (filename will vary):
# unzip ghettoVCB-master.zip
Archive: ghettoVCB-master.zip
creating: ghettoVCB-master/
inflating: ghettoVCB-master/README
inflating: ghettoVCB-master/ghettoVCB-restore.sh
inflating: ghettoVCB-master/ghettoVCB-restore_vm_restore_configuration_template
inflating: ghettoVCB-master/ghettoVCB-vm_backup_configuration_template
inflating: ghettoVCB-master/ghettoVCB.conf
inflating: ghettoVCB-master/ghettoVCB.sh
3) The script is now ready to be used and is located in a directory named ghettoVCB-master
# ls -l
-rw-r--r-- 1 root root 281 Jan 6 03:58 README
-rw-r--r-- 1 root root 16024 Jan 6 03:58 ghettoVCB-restore.sh
-rw-r--r-- 1 root root 309 Jan 6 03:58 ghettoVCB-restore_vm_restore_configuration_template
-rw-r--r-- 1 root root 356 Jan 6 03:58 ghettoVCB-vm_backup_configuration_template
-rw-r--r-- 1 root root 631 Jan 6 03:58 ghettoVCB.conf
-rw-r--r-- 1 root root 49375 Jan 6 03:58 ghettoVCB.sh
4) Before using the scripts, you will need to enable the execute permission on both ghettoVCB.sh and ghettoVCB-restore.sh by running the following:
chmod +x ghettoVCB.shchmod +x ghettoVCB-restore.sh
The following variables need to be defined within the script or in VM backup policy prior to execution.
Defining the backup datastore and folder in which the backups are stored (if folder does not exist, it will automatically be created):
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
Defining the backup disk format (zeroedthick, eagerzeroedthick, thin, and 2gbsparse are available):
DISK_BACKUP_FORMAT=thin
Note: If you are using the 2gbsparse on an ESXi 5.1 host, backups may fail. Please download the latest version of the ghettoVCB script which automatically resolves this or take a look at this article for the details.
Defining the backup rotation per VM:
VM_BACKUP_ROTATION_COUNT=3
Defining whether the VM is powered down or not prior to backup (1 = enable, 0 = disable):
Note: VM(s) that are powered off will not require snapshoting
POWER_VM_DOWN_BEFORE_BACKUP=0
Defining whether the VM can be hard powered off when "POWER_VM_DOWN_BEFORE_BACKUP" is enabled and VM does not have VMware Tools installed
ENABLE_HARD_POWER_OFF=0
If "ENABLE_HARD_POWER_OFF" is enabled, then this defines the number of (60sec) iterations the script will before executing a hard power off when:
ITER_TO_WAIT_SHUTDOWN=3
The number (60sec) iterations the script will wait when powering off the VM and will give up and ignore the particular VM for backup:
POWER_DOWN_TIMEOUT=5
The number (60sec) iterations the script will wait when taking a snapshot of a VM and will give up and ignore the particular VM for backup:
Note: Default value should suffice
SNAPSHOT_TIMEOUT=15
Defining whether or not to enable compression (1 = enable, 0 = disable):
ENABLE_COMPRESSION=0
NOTE: With ESXi 3.x/4.x/5.x, there is a limitation of the maximum size of a VM for compression within the unsupported Busybox Console which should not affect backups running classic ESX 3.x,4.x or 5.x. On ESXi 3.x the largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
Defining the adapter type for backed up VMDK (DEPERCATED - NO LONGER NEEDED😞
ADAPTER_FORMAT=buslogic
Defining whether virtual machine memory is snapped and if quiescing is enabled (1 = enable, 0 = disable):
Note: By default both are disabled
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
NOTE: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relevant to the actual snapshot and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
Defining VMDK(s) to backup from a particular VM either a list of vmdks or "all"
VMDK_FILES_TO_BACKUP="myvmdk.vmdk"
Defining whether or not VM(s) with existing snapshots can be backed up. This flag means it will CONSOLIDATE ALL EXISTING SNAPSHOTS for a VM prior to starting the backup (1 = yes, 0 = no):
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
Defining the order of which VM(s) should be shutdown first, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_SHUTDOWN_ORDER=vm1,vm2,vm3
Defining the order of VM(s) that should be started up first after backups have completed, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_STARTUP_ORDER=vm3,vm2,vm1
Defining NON-PERSISTENT NFS Backup Volume (1 = yes, 0 = no):
ENABLE_NON_PERSISTENT_NFS=0
NOTE: This is meant for environments that do not want a persisted connection to their NFS backup volume and allows the NFS volume to only be mounted during backups. The script expects the following 5 variables to be defined if this is to be used: UNMOUNT_NFS, NFS_SERVER, NFS_MOUNT, NFS_LOCAL_NAME and NFS_VM_BACKUP_DIR
Defining whether or not to unmount the NFS backup volume (1 = yes, 0 = no):
UNMOUNT_NFS=0
Defining the NFS server address (IP/hostname):
NFS_SERVER=172.51.0.192
Defining the NFS export path:
NFS_MOUNT=/upload
Defining the NFS datastore name:
NFS_LOCAL_NAME=backup
Defining the NFS backup directory for VMs:
NFS_VM_BACKUP_DIR=mybackups
NOTE: Only supported if you are running vSphere 4.1 and this feature is experimental. If you are having issues with sending mail, please take a look at Email Backup Log section
Defining whether or not to email backup logs (1 = yes, 0 = no):
EMAIL_LOG=1
Defining whether or not to email message will be deleted off the host whether it is successful in sending, this is used for debugging purposes. (1 = yes, 0 = no):
EMAIL_DEBUG=1
Defining email server:
EMAIL_SERVER=auroa.primp-industries.com
Defining email server port:
EMAIL_SERVER_PORT=25
Defining email delay interval (useful if you have slow SMTP server and would like to include a delay in netcat using -i param, default is 1second):
EMAIL_DELAY_INTERVAL=1
Defining recipient of the email:
EMAIL_TO=auroa@primp-industries.com
Defining from user which may require specific domain entry depending on email server configurations:
EMAIL_FROM=root@ghettoVCB
Defining to support RSYNC symbolic link creation (1 = yes, 0 = no):
RSYNC_LINK=0
Note: This enables an automatic creation of a generic symbolic link (both a relative & absolution path) in which users can refer to run replication backups using rsync from a remote host. This does not actually support rsync backups with ghettoVCB. Please take a look at the Rsync Section of the documentation for more details.
# cat ghettoVCB.conf
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=3
POWER_DOWN_TIMEOUT=5
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
ENABLE_NON_PERSISTENT_NFS=0
UNMOUNT_NFS=0
NFS_SERVER=172.30.0.195
NFS_MOUNT=/nfsshare
NFS_LOCAL_NAME=nfs_storage_backup
NFS_VM_BACKUP_DIR=mybackups
SNAPSHOT_TIMEOUT=15
EMAIL_LOG=0
EMAIL_SERVER=auroa.primp-industries.com
EMAIL_SERVER_PORT=25
EMAIL_DELAY_INTERVAL=1
EMAIL_TO=auroa@primp-industries.com
EMAIL_FROM=root@ghettoVCB
WORKDIR_DEBUG=0
VM_SHUTDOWN_ORDER=
VM_STARTUP_ORDER=
To override any existing configurations within the ghettoVCB.sh script and to use a global configuration file, user just needs to specify the new flag -g and path to global configuration file (For an example, please refer to the sample execution section of the documenation)
Running multiple instances of ghettoVCB is now supported with the latest release by specifying the working directory (-w) flag.
By default, the working directory of the ghettoVCB instance is /tmp/ghettoVCB.work and you can run another instance by providing an alternate working directory. You should try to minimize the number of ghettoVCB instances running on your ESXi host as it does consume some amount of resources when running in the ESXi Shell. This is considered an experimental feature, so please test in a development environment to ensure everything is working prior to moving to production system.
Ensure that you do not edit past this section:
########################## DO NOT MODIFY PAST THIS LINE ##########################
# ./ghettoVCB.sh
###############################################################################
#
# ghettoVCB for ESX/ESXi 3.5, 4.x+ and 5.x
# Author: William Lam
# http://www.virtuallyghetto.com/
# Documentation: http://communities.vmware.com/docs/DOC-8760
# Created: 11/17/2008
# Last modified: 2012_12_17 Version 0
#
###############################################################################
Usage: ghettoVCB.sh [options]
OPTIONS:
-a Backup all VMs on host
-f List of VMs to backup
-m Name of VM to backup (overrides -f)
-c VM configuration directory for VM backups
-g Path to global ghettoVCB configuration file
-l File to output logging
-w ghettoVCB work directory (default: )
-d Debug level [info|debug|dryrun] (default: info)
(e.g.)
Backup VMs stored in a list
./ghettoVCB.sh -f vms_to_backup
Backup a single VM
./ghettoVCB.sh -m vm_to_backup
Backup all VMs residing on this host
./ghettoVCB.sh -a
Backup all VMs residing on this host except for the VMs in the exclusion list
./ghettoVCB.sh -a -e vm_exclusion_list
Backup VMs based on specific configuration located in directory
./ghettoVCB.sh -f vms_to_backup -c vm_backup_configs
Backup VMs using global ghettoVCB configuration file
./ghettoVCB.sh -f vms_to_backup -g /global/ghettoVCB.conf
Output will log to /tmp/ghettoVCB.log (consider logging to local or remote datastore to persist logs)
./ghettoVCB.sh -f vms_to_backup -l /vmfs/volume/local-storage/ghettoVCB.log
Dry run (no backup will take place)
./ghettoVCB.sh -f vms_to_backup -d dryrun
The input to this script is a file that contains the display name of the virtual machine(s) separated by a newline. When creating this file on a non-Linux/UNIX system, you may introduce ^M character which can cause the script to miss-behave. To ensure this does not occur, plesae create the file on the ESX/ESXi host.
Here is a sample of what the file would look like:
[root@himalaya ~]# cat vms_to_backup
vCOPS
vMA
vCloudConnector
Debug Mode
Note: This execution mode provides a qucik summary of details on whether a given set of VM(s)/VMDK(s) will be backed up. It provides additional information such as VMs that may have snapshots, VMDK(s) that are configured as independent disks, or other issues that may cause a VM or VMDK to not backed up.
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d dryrun
Logging output to "/tmp/ghettoVCB-2011-03-13_15-19-57.log" ...
2011-03-13 15:19:57 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:19:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:19:57 -- info: CONFIG - GHETTOVCB_PID = 30157
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-19-57
2011-03-13 15:19:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:19:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:19:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:19:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:19:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:19:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:19:57 -- info: CONFIG - LOG_LEVEL = dryrun
2011-03-13 15:19:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-19-57.log
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:19:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:19:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:19:57 -- info:
2011-03-13 15:19:57 -- dryrun: ###############################################
2011-03-13 15:19:57 -- dryrun: Virtual Machine: scofield
2011-03-13 15:19:57 -- dryrun: VM_ID: 704
2011-03-13 15:19:57 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield
2011-03-13 15:19:57 -- dryrun: VMX_CONF: scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:57 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: scofield_3.vmdk 3 GB
2011-03-13 15:19:58 -- dryrun: scofield_2.vmdk 2 GB
2011-03-13 15:19:58 -- dryrun: scofield_1.vmdk 1 GB
2011-03-13 15:19:58 -- dryrun: scofield.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 11 GB
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vMA
2011-03-13 15:19:58 -- dryrun: VM_ID: 1440
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: vMA-000002.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 5 GB
2011-03-13 15:19:58 -- dryrun: Snapshots found for this VM, please commit all snapshots before continuing!
2011-03-13 15:19:58 -- dryrun: THIS VIRTUAL MACHINE WILL NOT BE BACKED UP DUE TO EXISTING SNAPSHOTS!
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vCloudConnector
2011-03-13 15:19:58 -- dryrun: VM_ID: 2064
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector.vmdk 3 GB
2011-03-13 15:19:59 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector_1.vmdk 40 GB
2011-03-13 15:19:59 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 3 GB
2011-03-13 15:19:59 -- dryrun: Snapshots can not be taken for indepdenent disks!
2011-03-13 15:19:59 -- dryrun: THIS VIRTUAL MACHINE WILL NOT HAVE ALL ITS VMDKS BACKED UP!
2011-03-13 15:19:59 -- dryrun: ###############################################
2011-03-13 15:19:59 -- info: ###### Final status: OK, only a dryrun. ######
2011-03-13 15:19:59 -- info: ============================== ghettoVCB LOG END ================================
In the example above, we have 3 VMs to be backed up:
Note: This execution modes provides more in-depth information about environment/backup process including additional storage debugging information which provides information about both the source/destination datastore pre and post backups. This can be very useful in troubleshooting backups
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d debug
Logging output to "/tmp/ghettoVCB-2011-03-13_15-27-59.log" ...
2011-03-13 15:27:59 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:27:59 -- debug: Succesfully acquired lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:27:59 -- debug: HOST VERSION: VMware ESX 4.1.0 build-260247
2011-03-13 15:27:59 -- debug: HOST LEVEL: VMware ESX 4.1.0 GA
2011-03-13 15:27:59 -- debug: HOSTNAME: himalaya.primp-industries.com
2011-03-13 15:27:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:27:59 -- info: CONFIG - GHETTOVCB_PID = 31074
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-27-59
2011-03-13 15:27:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:27:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:27:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:27:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:27:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:27:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:27:59 -- info: CONFIG - LOG_LEVEL = debug
2011-03-13 15:27:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-27-59.log
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:27:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:27:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:27:59 -- info:
2011-03-13 15:28:01 -- debug: Storage Information before backup:
2011-03-13 15:28:01 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:01 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:28:01 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:28:01 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:02 -- info: Initiate backup for scofield
2011-03-13 15:28:02 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_3.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk'...
Clone: 37% done.
2011-03-13 15:28:04 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_2.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 85% done.
2011-03-13 15:28:05 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_1.vmdk"
2011-03-13 15:28:06 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk'...
Clone: 78% done.
2011-03-13 15:29:52 -- info: Backup Duration: 1.83 Minutes
2011-03-13 15:29:52 -- info: Successfully completed backup for scofield!
2011-03-13 15:29:54 -- debug: Storage Information after backup:
2011-03-13 15:29:54 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:54 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:54 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:54 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:55 -- debug: Storage Information before backup:
2011-03-13 15:29:55 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:55 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:55 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:29:57 -- debug: Storage Information before backup:
2011-03-13 15:29:57 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:57 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:57 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:57 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:58 -- info: Initiate backup for vCloudConnector
2011-03-13 15:29:58 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vCloudConnector/vCloudConnector-2011-03-13_15-27-59/vCloudConnector.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 97% done.
2011-03-13 15:30:45 -- info: Backup Duration: 47 Seconds
2011-03-13 15:30:45 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:30:45 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:30:45 -- debug: Succesfully removed lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:30:45 -- info: ============================== ghettoVCB LOG END ================================
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup
# ./ghettoVCB.sh -m MyVM
/ghettoVCB # ./ghettoVCB.sh -a
/ghettoVCB # ./ghettoVCB.sh -a -e vm_exclusion_list
1. Create folder to hold individual VM backup policies (can be named anything):
[root@himalaya ~]# mkdir backup_config
2. Create individual VM backup policies for each VM that ensure each file is named exactly as the display name of the VM being backed up (use provided template to create duplicates):
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template scofield
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template vCloudConnector
Listing of VM backup policy within backup configuration directory
[root@himalaya backup_config]# ls
scofield vCloudConnector
ghettoVCB-vm_backup_configuration_template
Backup policy for "scofield" (backup only 2 specific VMDKs)
[root@himalaya backup_config]# cat scofield
scofield_2.vmdk,scofield_1.vmdk
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Backup policy for VM "vCloudConnector" (backup all VMDKs found)
[root@himalaya backup_config]# cat
vCloudConnectorVM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
vCloudConnector.vmdk
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Note: When specifying -c option (individual VM backup policy mode) if a VM is listed in the backup list but DOES NOT have a corresponding backup policy, the VM will be backed up using the default configuration found within the ghettoVCB.sh script.
Execution of backup
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup -c backup_config -l /tmp/ghettoVCB.log
2011-03-13 15:40:50 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:40:51 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//scofield
2011-03-13 15:40:51 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:51 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:51 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:51 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:51 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:51 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:51 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:51 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:51 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:51 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:51 -- info: CONFIG - VMDK_FILES_TO_BACKUP = scofield_2.vmdk,scofield_1.vmdk
2011-03-13 15:40:51 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:51 -- info:
2011-03-13 15:40:53 -- info: Initiate backup for scofield
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 100% done.
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk'...
Clone: 100% done.
2011-03-13 15:40:55 -- info: Backup Duration: 2 Seconds
2011-03-13 15:40:55 -- info: Successfully completed backup for scofield!
2011-03-13 15:40:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:57 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:40:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:57 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:40:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:57 -- info:
2011-03-13 15:40:59 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:40:59 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//vCloudConnector
2011-03-13 15:40:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:59 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:59 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = vCloudConnector.vmdk
2011-03-13 15:40:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:59 -- info:
2011-03-13 15:41:01 -- info: Initiate backup for vCloudConnector
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 100% done.
2011-03-13 15:41:51 -- info: Backup Duration: 50 Seconds
2011-03-13 15:41:51 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:41:51 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:41:51 -- info: ============================== ghettoVCB LOG END ================================
Please take a look at FAQ #25 for more details before continuing
To make use of this feature, modify the variable ENABLE_COMPRESSION from 0 to 1. Please note, do not mix uncompressed backups with compressed backups. Ensure that directories selected for backups do not contain any backups with previous versions of ghettoVCB before enabling and implementing the compressed backups feature.
nc (netcat) utility must be present for email support to function, this utility is a now a default with the release of vSphere 4.1 or greater, previous releases of VI 3.5 and/or vSphere 4.0 does not contain this utility. The reason this is listed as experimental is it may not be compatible with all email servers as the script utlizes nc (netcat) utility to communicate to an email server. This feature is provided as-is with no guarantees. If you enable this feature, a separate log will be generated along side any normal logging which will be used to email recipient. If for whatever reason, the email fails to send, an entry will appear per the normal logging mechanism.
Users should also make note due to limited functionality of netcat, it uses SMTP pipelining which is not the most ideal method of communicating with an SMTP server. Email from ghettoVCB may not work if your email server does not support this feature.
You can define an email recipient in the following two ways:
EMAIL_TO=william@virtuallyghetto.com
OR
EMAIL_TO=william@virtuallyghetto.com,tuan@virtuallyghetto.com
If you are running ESXi 5.1, you will need to create a custom firewall rule to allow your email traffic to go out which I will assume is default port 25. Here are the steps for creating a custom email rule.
Step 1 - Create a file called /etc/vmware/firewall/email.xml with contains the following:
<ConfigRoot>
<service>
<id>email</id>
<rule id="0000">
<direction>outbound</direction>
<protocol>tcp</protocol>
<porttype>dst</porttype>
<port>25</port>
</rule>
<enabled>true</enabled>
<required>false</required>
</service>
</ConfigRoot>
Step 2 - Reload the ESXi firewall by running the following ESXCLI command:
~ #
esxcli network firewall refresh
Step 3 - Confirm that your email rule has been loaded by running the following ESXCLI command:
~ # esxcli network firewall ruleset list | grep email
email true
Step 4 - Connect to your email server by usingn nc (netcat) by running the following command and specifying the IP Address/Port of your email server:
~ # nc 172.30.0.107 25
220 mail.primp-industries.com ESMTP Postfix
You should recieve a response from your email server and you can enter Ctrl+C to exit. This custom ESXi firewall rule will not persist after a reboot, so you should create a custom VIB to ensure it persists after a system reboot. Please take a look at this article for the details.
To make use of this feature, modify the variable RSYNC_LINK from 0 to 1. Please note, this is an experimental feature request from users that rely on rsync to replicate changes from one datastore volume to another datastore volume. The premise of this feature is to have a standardized folder that rsync can monitor for changes to replicate to another backup datastore. When this feature is enabled, a symbolic link will be generated with the format of "<VMNAME>-symlink" and will reference the latest successful VM backup. You can then rely on this symbolic link to watch for changes and replicate to your backup datastore.
Here is an example of what this would look like:
[root@himalaya ghettoVCB]# ls -la /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/
total 0
drwxr-xr-x 1 nobody nobody 110 Sep 27 08:08 .
drwxr-xr-x 1 nobody nobody 17 Sep 16 14:01 ..
lrwxrwxrwx 1 nobody nobody 89 Sep 27 08:08 vcma-symlink -> /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/vcma-2010-09-27_08-07-37
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:04 vcma-2010-09-27_08-04-26
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:06 vcma-2010-09-27_08-05-55
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:08 vcma-2010-09-27_08-07-37
FYI - This feature has not been tested, please provide feedback if this does not work as expected.
To recover a VM that has been processed by ghettoVCB, please take a look at this document: Ghetto Tech Preview - ghettoVCB-restore.sh - Restoring VM's backed up from ghettoVCB to ESX(i) 3.5, ...
There may be a situation where you need to stop the ghettoVCB process and entering Ctrl+C will only kill off the main ghettoVCB process, however there may still be other spawn processes that you may need to identify and stop. Below are two scenarios you may encounter and the process to completely stop all processes related to ghettoVCB.
Step 1 - Press Ctrl+C which will kill off the main ghettoVCB instance
Step 2 - Search for any existing ghettoVCB process by running the following:
# ps -c | grep ghettoVCB | grep -v grep
3360136 3360136 tail tail -f /tmp/ghettoVCB.work/ghettovcb.Cs1M1x
Step 3 - Here we can see there is a tail command that was used in the script. We need to stop this process by using the kill command which accepts the PID (Process ID) which is identified by the first value on the far left hand side of the command. In this example, it is 3360136.
# kill -9 3360136
Note: Make sure you identify the correct PID, else you could accidently impact a running VM or worse your ESXi host.
Step 4 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Step 1 - Search for the ghettoVCB process (you can also validate the PID from the logs)
~ # ps -c | grep ghettoVCB | grep -v grep
3360393 3360393 busybox ash ./ghettoVCB.sh -f list -d debug
3360790 3360790 tail tail -f /tmp/ghettoVCB.work/ghettovcb.deGeB7
Step 2 - Stop both the main ghettoVCB instance & tail command by using the kill command and specifying their respective PID IDs:
kill -9 3360393
kill -9 3360790
Step 3 - If a VM was in the process of being backed up, there is an additional process for the actual vmkfstools copy. You will need to identify the process for that and kill that as well. We will again use ps -c command and search for any vmkfstools that are running:
# ps -c | grep vmkfstools | grep -v grep
3360796 3360796 vmkfstools /sbin/vmkfstools -i /vmfs/volumes/himalaya-temporary/VC-Windows/VC-Windows.vmdk -a lsilogic -d thin /vmfs/volumes/test-dont-use-this-volume/backups/VC-Windows/VC-Windows-2013-01-26_16-45-35/VC-Windows.vmdk
Step 4 - In case there is someone manually running a vmkfstools, make sure you take a look at the command itself and that it maps back to the current VM that was being backed up before kill the process. Once you have identified the proper PID, go ahead and use the kill command:
# kill -9 3360796
Step 5 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Please take a moment to read over what is a cronjob and how to set one up, before continuing
The task of configuring cronjobs on classic ESX servers (with Service Console) is no different than traditional cronjobs on *nix operating systems (this procedure is outlined in the link above). With ESXi on the other hand, additional factors need to be taken into account when setting up cronjobs in the limited shell console called Busybox because changes made do not persist through a system reboot. The following document will outline steps to ensure that cronjob configurations are saved and present upon a reboot.
Important Note: Always redirect the ghettoVCB output to /dev/null and/or to a log when automating via cron, this becomes very important as one user has identified a limited amount of buffer capacity in which once filled, may cause ghettoVCB to stop in the middle of a backup. This primarily only affects users on ESXi, but it is good practice to always redirect the output. Also ensure you are specifying the FULL PATH when referencing the ghettoVCB script, input or log files.
e.g.
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /dev/null
or
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /tmp/ghettoVCB.log
Task: Configure ghettoVCB.sh to execute a backup five days a week (M-F) at 12AM (midnight) everyday and send output to a unique log file
Configure on ESX:
1. As root, you'll install your cronjob by issuing:
[root@himalaya ~]# crontab -e
2. Append the following entry:
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
3. Save and exit
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -e
no crontab for root - using an empty one
crontab: installing new crontab
4. List out and verify the cronjob that was just created:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -l
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
You're ready to go!
Configure on ESXi:
1. Setup the cronjob by appending the following line to /var/spool/cron/crontabs/root:
0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-$(date +\%s).log
If you are unable to edit/modify /var/spool/cron/crontabs/root, please make a copy and then edit the copy with the changes
cp /var/spool/cron/crontabs/root /var/spool/cron/crontabs/root.backup
Once your changes have been made, then "mv" the backup to the original file. This may occur on ESXi 4.x or 5.x hosts
mv /var/spool/cron/crontabs/root.backup /var/spool/cron/crontabs/root
You can now verify the crontab entry has been updated by using "cat" utility.
2. Kill the current crond (cron daemon) and then restart the crond for the changes to take affect:
On ESXi < 3.5u3
kill $(ps | grep crond | cut -f 1 -d ' ')
On ESXi 3.5u3+
~ # kill $(pidof crond)
~ # crond
On ESXi 4.x/5.0
~ # kill $(cat /var/run/crond.pid)
~ # busybox crond
On ESXi 5.1 to 6.x
~ # kill $(cat /var/run/crond.pid)
~ # crond
On ESXi 7.x
~ # kill $(cat /var/run/crond.pid)
~ # /usr/lib/vmware/busybox/bin/busybox crond
3. Now that the cronjob is ready to go, you need to ensure that this cronjob will persist through a reboot. You'll need to add the following two lines to /etc/rc.local (ensure that the cron entry matches what was defined above). In ESXi 5.1, you will need to edit /etc/rc.local.d/local.sh instead of /etc/rc.local as that is no longer valid.
On ESXi 3.5
/bin/kill $(pidof crond)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 4.x/5.0
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
On ESXi 5.1 to 6.x
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 7.x
/bin/kill $(cat /var/run/crond.pid) > /dev/null 2>&1
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/usr/lib/vmware/busybox/bin/busybox crond
Afterwards the file should look like the following:
~ # cat /etc/rc.local
#! /bin/ash
export PATH=/sbin:/bin
log() {
echo "$1"
logger init "$1"
}
#execute all service retgistered in /etc/rc.local.d
if [http:// -d /etc/rc.local.d |http:// -d /etc/rc.local.d ]; then
for filename in `find /etc/rc.local.d/ | sort`
do
if [ -f $filename ] && [ -x $filename ]; then
log "running $filename"
$filename
fi
done
fi
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
This will ensure that the cronjob is re-created upon a reboot of the system through a startup script
2. To ensure that this is saved in the ESXi configuration, we need to manually initiate an ESXi backup by running:
~ # /sbin/auto-backup.sh
config implicitly loaded
local.tgz
etc/vmware/vmkiscsid/vmkiscsid.db
etc/dropbear/dropbear_dss_host_key
etc/dropbear/dropbear_rsa_host_key
etc/opt/vmware/vpxa/vpxa.cfg
etc/opt/vmware/vpxa/dasConfig.xml
etc/sysconfig/network
etc/vmware/hostd/authorization.xml
etc/vmware/hostd/hostsvc.xml
etc/vmware/hostd/pools.xml
etc/vmware/hostd/vmAutoStart.xml
etc/vmware/hostd/vmInventory.xml
etc/vmware/hostd/proxy.xml
etc/vmware/ssl/rui.crt
etc/vmware/ssl/rui.key
etc/vmware/vmkiscsid/initiatorname.iscsi
etc/vmware/vmkiscsid/iscsid.conf
etc/vmware/vmware.lic
etc/vmware/config
etc/vmware/dvsdata.db
etc/vmware/esx.conf
etc/vmware/license.cfg
etc/vmware/locker.conf
etc/vmware/snmp.xml
etc/group
etc/hosts
etc/inetd.conf
etc/rc.local
etc/chkconfig.db
etc/ntp.conf
etc/passwd
etc/random-seed
etc/resolv.conf
etc/shadow
etc/sfcb/repository/root/interop/cim_indicationfilter.idx
etc/sfcb/repository/root/interop/cim_indicationhandlercimxml.idx
etc/sfcb/repository/root/interop/cim_listenerdestinationcimxml.idx
etc/sfcb/repository/root/interop/cim_indicationsubscription.idx
Binary files /etc/vmware/dvsdata.db and /tmp/auto-backup.31345.dir/etc/vmware/dvsdata.db differ
config implicitly loaded
Saving current state in /bootbank
Clock updated.
Time: 20:40:36 Date: 08/14/2009 UTC
Now you're really done!
If you're still having trouble getting the cronjob to work, ensure that you've specified the correct parameters and there aren’t any typos in any part of the syntax.
Ensure crond (cron daemon) is running:
ESX 3.x/4.0:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# ps -ef | grep crond | grep -v grep
root 2625 1 0 Aug13 ? 00:00:00 crond
ESXi 3.x/4.x/5.x:
~ # ps | grep crond | grep -v grep
5196 5196 busybox crond
Ensure that the date/time on your ESX(i) host is setup correctly:
ESX(i):
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# date
Fri Aug 14 23:44:47 PDT 2009
Note: Careful attention must be noted if more than one backup is performed per day. Backup windows should be staggered to avoid contention or saturation of resources during these periods.
0Q: I'm getting error X when using the script or I'm not getting any errors, the backup didn’t even take place. What can I do?
0A: First off, before posting a comment/question, please thoroughly read through the ENTIRE documentation including the FAQs to see if your question has already been ansered.
1Q: I've read through the entire documentation + FAQs and still have not found my answer to the problem I'm seeing. What can I do?
1A: Please join the ghettoVCB Group to post your question/comment.
2Q: I've sent you private message or email but I haven't received a response? What gives?
2A: I do not accept issues/bugs reported via PM or email, I will reply back, directing you to post on the appropriate VMTN forum (that's what it's for). If the data/results you're providing is truely senstive to your environment I will hear you out, but 99.99% it is not, so please do not messsage/email me directly. I do monitor all forums that contain my script including the normal VMTN forums and will try to get back to your question as soon as I can and as time permits. Please do be patient as you're not the only person using the script (600,000+ views), thank you.
3Q: Can I schedule backups to take place hourly, daily, monthly, yearly?
3A: Yes, do a search online for crontab.
4Q: I would like to setup cronjob for ESX(i) 3.5 or 4.0?
4A: Take a look at the Cronjob FAQ section in this document.
5Q: I want to schedule my backup on Windows, how do I do this?
5A: Do a search for plink. Make sure you have paired SSH keys setup between your Windows system and ESX/ESXi host.
6Q: I only have a single ESXi host. I want to take backups and store them somewhere else. The problem is: I don't have NFS, iSCSI nor FC SAN. What can I do?
6A: You can use local storage to store your backups assuming that you have enough space on the destination datastore. Afterwards, you can use scp (WinSCP/FastSCP) to transfer the backups from the ESXi host to your local desktop.
7Q: I’m pissed; the backup is taking too long. My datastore is of type X?
7A: YMMV, take a look at your storage configuration and make sure it is optimized.
8Q: I noticed that the backup rotation is occurring after a backup. I don't have enough local storage space, can the process be changed?
8A: This is primarily done to ensure that you have at least one good backup in case the new backup fails. If you would like to modify the script, you're more than welcome to do so.
9Q: What is the best storage configuration for datastore type X?
9A: Search the VMTN forums; there are various configurations for the different type of storage/etc.
10Q: I want to setup an NFS server to run my backups. Which is the best and should it be virtual or physical?
10A: Please refer to answer 7A. From experience, we’ve seen physical instances of NFS servers to be faster than their virtual counterparts. As always, YMMV.
11Q: I have VMs that have snapshots. I want to back these things up but the script doesn’t let me do it. How do I fix that?
11A: VM snapshots are not meant to be kept for long durations. When backing up a VM that contains a snapshot, you should ensure all snapshots have been committed prior to running a backup. No exceptions will be made…ever.
12Q: I would like to restore from backup, what is the best method?
12A: The restore process will be unique for each environment and should be determined by your backup/recovery plans. At a high level you have the option of mounting the backup datastore and registering the VM in question or copy the VM from the backup datastore to the ESX/ESXi host. The latter is recommended so that you're not running a VM living on the backup datastore or inadvertently modifying your backup VM(s). You can also take a look at ghettoVCB-restore which is experimentally supported.
13Q: When I try to run the script I get: "-bash: ./ghettoVCB.sh: Permission denied", what is wrong?
13A: You need to change the permission on the script to be executable, chmod +x ghettoVCB.sh
14Q: Where can I download the latest version of the script?
14A: The latest version is available on on github - https://github.com/lamw/ghettoVCB/downloads
15Q: I would like to suggest/recommend feature X, can I get it? When can I get it? Why isn't it here, what gives?
15A: The general purpose of this script is to provide a backup solution around VMware VMs. Any additional features outside of that process will be taken into consideration depending on the amount of time, number of requests and actual usefulness as a whole to the community rather than to an individual.
16Q: I have found this script to be very useful and would like to contribute back, what can I do?
16A: To continue to develop and share new scripts and resources with the community, we need your support. You can donate here Thank You!
17Q: What are the different type of backup uses cases that are supported with ghettoVCB?
17A: 1) Live backup of VM with the use of a snapshot and 2) Offline backup of a VM without a snapshot. These are the only two use cases supported by the script.
18Q: When I execute the script on ESX(i) I get some funky errors such as ": not found.sh" or "command not found". What is this?
18A: Most likely you have some ^M characters within the script which may have come from either editing the script using Windows editor, uploading the script using the datastore browser OR using wget. The best option is to either using WinSCP on Windows to upload the script and edit using vi editor on ESX(i) host OR Linux/UNIX scp to copy the script into the host. If you still continue to have the issue, do a search online on various methods of removing this Windows return carriage from the script
19Q: My backup works fine OR it works for a single backup but I get an error message "Input/output error" or "-ash: YYYY-MM-DD: not found" during the snapshot removal process. What is this?
19A: The issue has been recently identified by few users as a problem with user's NFS server in which it reports an error when deleting large files that take longer than 10seconds. VMware has recently released a KB article http://kb.vmware.com/kb/1035332 explaining the details and starting with vSphere 4.1 Update 2 or vSphere 5.0, a new advanced ESX(i) parameter has been introduced to increase the timeout. This has resolved the problem for several users and maybe something to consider if you are running into this issue, specifically with NFS based backups.
20Q: Will this script function with vCenter and DRS enabled?
20Q: No, if the ESX(i) hosts are in a DRS enabled cluster, VMs that are to be backed up could potentially be backed up twice or never get backed up. The script is executed on a per host basis and one would need to come up a way of tracking backups on all hosts and perhaps write out to external file to ensure that all VMs are backed up. The main use case for this script are for standalone ESX(i) host
21Q: I'm trying to use WinSCP to manually copy VM files but it's very slow or never completes on huge files, why is that?
21A: WinSCP was not designed for copying VM files out of your ESX(i) host, take a look at Veeam's FastSCP which is designed for moving VM files and is a free utility.
22Q: Can I use setup NFS Server using Windows Services for UNIX (WSFU) and will it work?
22A: I've only heard a handful of users that have successfully implemented WSFU and got it working, YMMV. VMware also has a KB article decribing the setup process here: http://kb.vmware.com/kb/1004490 for those that are interested. Here is a thread on a user's experience between Windows Vs. Linux NFS that maybe helpful.
23Q: How do VMware Snapshots work?
23A: http://kb.vmware.com/kb/1015180
24Q: What files make up a Virtual Machine?
24A: http://virtualisedreality.wordpress.com/2009/09/16/quick-reminder-of-what-files-make-up-a-virtual-ma...
25Q: I'm having some issues restoring a compressed VM backup?
25A: There is a limitation in the size of the VM for compression under ESXi 3.x & 4.x, this limitation is in the unsupported Busybox console and should not affect classic ESX 3.x/4.x. On ESXi 3.x, the maximum largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
26Q: I'm backing up my VM as "thin" format but I'm still not noticing any size reduction in the backup? What gives?
2bA: Please refer to this blog post which explains what's going on: http://www.yellow-bricks.com/2009/07/31/storage-vmotion-and-moving-to-a-thin-provisioned-disk/
27Q: I've enabled VM_SNAPSHOT_MEMORY and when I restore my VM it's still offline, I thought this would keep it's memory state?
27A: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relavent to the actual snapshot itself and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
28Q: Can I rename the directories and the VMs after a VM has been backed up?
28A: The answer yes, you can ... but you may run into all sorts of issues which may break the backup process. The script expects a certain layout and specific naming scheme for it to maintain the proper rotation count. If you need to move or rename a VM, please take it out of the directory and place it in another location
29Q: Can ghettoVCB support CBT (Change Block Tracking)?
29A: No, that is a functionality of the vSphere API + VDDK API (vSphere Disk Development Kit). You will need to look at paid solutions such as VMware vDR, Veeam Backup & Recovery, PHD Virtual Backups, etc. to leverage that functionailty.
30Q: Does ghettoVCB support rsync backups?
30A: Currently ghettoVCB does not support rsync backups, you either obtain or compile your own static rsync binary and run on ESXi, but this is an unsupported configuration. You may take a look at this blog post for some details.
31Q: How can I contribute back?
31A: You can provide feedback/comments on the ghettoVCB Group. If you have found this script to be useful and would like to contribute back, please click here to donate.
32Q: How can select individual VMDKs to backup from a VM?
32A: Ideally you would use the "-c" option which requires you to create individual VM configuration file, this is where you would select specific VMDKs to backup. Note, that if you do not need to define all properties, anything not defined will adhere from the default global properties whether you're editing the ghettoVCB.sh script or using ghettoVCB global configuration file. It is not recommended that you edit the ghettoVCB.sh script and modify the VMDK_FILES_TO_BACKUP variable, but if you would like to keep everything in one script, you may add the extensive list of VMDKs to backup but do know this can get error prone as script may be edited frequently and lose some flexibility to support multiple environments.
33Q: Why is email not working when I'm using ESXi 5.x but it worked in ESXi 4.x?
33A: ESXi 5.x has implemented a new firewall which requires the email port that is being used to be opened. Please refer to the following articles on creating a custom firewall rule for email:
http://www.virtuallyghetto.com/2012/09/creating-custom-vibs-for-esxi-50-51.html
How to Create Custom Firewall Rules in ESXi 50
How to Persist Configuration Changes in ESXi 4.x/5.x Part 1
How to Persist Configuration Changes in ESXi 4.x/5.x Part 2
34Q: How do I stop the ghettoVCB process?
34A: Take a look at the Stopping ghettoVCB Process section of the documentation for more details.
Many have asked what is the best configuration and recommendation for setting up a cheap NFS Server to run backups for VMs. This has been a question we've tried to stay away from just because the possiblities and solutions are endless. One can go with physical vs. virtual, use VSA (Virtual Storage Appliances) such as OpenFiler or Lefthand Networks, Windows vs. Linux/UNIX. We've not personally tested and verify all these solutions and it all comes down to "it depends" type of answer. Though from our experience, we've had much better success with a physical server than a virtual.
It is also well known that some users are experiencing backup issues when running specifically against NFS, primarily around the rotation and purging of previous backups. The theory from what we can tell by talking to various users is that when the rotation is occuring, the request to delete the file(s) may take awhile and does not return within a certain time frame and causes the script to error out with unexpected messages. Though the backups were successful, it will cause unexpected results with directory structures on the NFS target. We've not been able to isolate why this is occuring and maybe due to NFS configuration/exports or hardware or connection not being able to support this process.
We'll continue to help where we can in diagonising this issus but we wanted to share our current NFS configuration, perhaps it may help some users who are new or trying to setup their system. ( Disclaimer: These configurations are not recommendations nor endorsement for any of the components being used)
UPDATE: Please also read FAQ #19 for details + resolution
Server Type: Physical
Model: HP DL320 G2
OS: Arch linux 2.6.28
Disks: 2 x 1.5TB
RAID: Software RAID1
Source Host Backups: ESX 3.5u4 and ESX 4.0u1 (We don't run any ESXi hosts)
uname -a output
Linux XXXXX.XXXXX.ucsb.edu 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686 Intel(R) Pentium(R) 4 CPU 3.06GHz GenuineIntel GNU/Linux
NICs:
00:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
00:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
NFS Export Options:
/exports/vm-backups XXX.XXX.XXX.XXX/24(rw,async,all_squash,anonuid=99,anongid=99)
*One important thing to check is to verify that your NFS exportion options are setup correctly, "async" should be configured to ensure that all IO requests are processed and reply back to the client before waiting for the data to be written to the storage.
*Recently VMware released a KB article describing the various "Advanced NFS Options" and their meanings and recommendations: http://kb.vmware.com/kb/1007909 We've not personally had to touch any of these, but for other vendors such as EMC and NetApp, there are some best practices around configuring some of these values depending on the number of NFS volumes or number of ESX(i) host connecting to a volume. You may want to take a look to see if any of these options may help with NFS issue that some are seeing
*Users should also try to look at their ESX(i) host logs during the time interval when they're noticing these issues and see if they can find any correlation along with monitoring the performance on their NFS Server.
*Lastly, there are probably other things that can be done to improve NFS performance or further optimization, a simple search online will also yield many resources.
Windows utility to email ghettoVCB Backup Logs - http://www.waldrondigital.com/2010/05/11/ghettovcb-e-mail-rotate-logs-batch-file-for-vmware/
Windows front-end utility to ghettoVCB - http://www.magikmon.com/mkbackup/ghettovcb.en.html
Note: Neither of these tools are supported, for questions or comments regarding these utilities please refer to the author's pages.
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
Enhancements:
Fixes:
Big thanks to Alain Spineux and his contributions to the ghettoVCB script and helping with debugging and testing.
Enhancements:
Fixes:
Enhancements:
Enhancements:
Enhancements:
Fixes:
Fixes:
Enhancements:
Fixes:
Fixes:
Big thanks goes out to the community for the suggested features and to those that submitted snippet of their modifications.
Updated FAQ #20-24 for common issues/questions. Also included a new section about our "personal" NFS configuration and setup.
Fix the crontab section to reflect the correct syntax + updated FAQ #17,#18 and #19 for common issues.
The following enhancements and fixes have been implemented in this release of ghettoVCB. Special thanks goes out to all the ghettoVCB BETA testers for providing time and their environments to test features/fixes of the new script!
Enhancements:
Fixes:
I can reproduce my stupidity at will
As you can see below setting quiesce for a vm that is not enabled will give that type of output.
Not sure why it is a bit different to the original post.
Perhaps the script could read:
Quiesce VM when taking snapshot (requires VMware Tools and VSS to be installed)?
/vmfs/volumes/4a7bc59f-d1dd8294-90ca-0019d1010534/tools # ./ghettoVCB.sh -f vms 2009-11-19 05:38:51 -- info: ============================== ghettoVCB LOG START ==============================
2009-11-19 05:38:51 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/msc009ds
2009-11-19 05:38:51 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 1
2009-11-19 05:38:51 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick
2009-11-19 05:38:51 -- info: CONFIG - ADAPTER_FORMAT = lsilogic
2009-11-19 05:38:51 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2009-11-19 05:38:51 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2009-11-19 05:38:51 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2009-11-19 05:38:51 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2009-11-19 05:38:51 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2009-11-19 05:38:51 -- info: CONFIG - LOG_LEVEL = info
2009-11-19 05:38:51 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout
2009-11-19 05:38:51 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 1
2009-11-19 05:38:51 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 1
2009-11-19 05:38:51 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2009-11-19 05:38:54 -- info: Initiate backup for PMOSTEST
2009-11-19 05:38:54 -- info: Creating Snapshot "ghettoVCB-snapshot-2009-11-19" f or PMOSTEST
sleep: Interrupted system call
sleep: Interrupted system call
Destination disk format: VMFS zeroedthick
Cloning disk '/vmfs/volumes/mnc053datastore/PMOSTEST/PMOS.vmdk'...
Clone: 100% done.
2009-11-19 05:47:28 -- info: Removing snapshot from PMOSTEST ...
2009-11-19 05:47:31 -- info: Backup Duration: 8.62 Minutes
2009-11-19 05:47:32 -- info: Successfully completed backup for PMOSTEST!
2009-11-19 05:47:32 -- info: ============================== ghettoVCB LOG END ================================
/vmfs/volumes/4a7bc59f-d1dd8294-90ca-0019d1010534/tools # ./ghettoVCB.sh -f vms
2009-11-19 05:49:11 -- info: ============================== ghettoVCB LOG START ==============================
2009-11-19 05:49:11 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/msc009ds
2009-11-19 05:49:11 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 1
2009-11-19 05:49:11 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick
2009-11-19 05:49:11 -- info: CONFIG - ADAPTER_FORMAT = lsilogic
2009-11-19 05:49:11 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2009-11-19 05:49:11 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2009-11-19 05:49:11 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2009-11-19 05:49:11 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2009-11-19 05:49:11 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2009-11-19 05:49:11 -- info: CONFIG - LOG_LEVEL = info
2009-11-19 05:49:11 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout
2009-11-19 05:49:11 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 1
2009-11-19 05:49:11 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2009-11-19 05:49:11 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2009-11-19 05:49:14 -- info: Initiate backup for PMOSTEST
2009-11-19 05:49:14 -- info: Creating Snapshot "ghettoVCB-snapshot-2009-11-19" for PMOSTEST
Destination disk format: VMFS zeroedthick
Cloning disk '/vmfs/volumes/mnc053datastore/PMOSTEST/PMOS.vmdk'...
Clone: 100% done.
2009-11-19 05:58:39 -- info: Removing snapshot from PMOSTEST ...
2009-11-19 05:58:42 -- info: Backup Duration: 9.47 Minutes
2009-11-19 05:58:42 -- info: Successfully completed backup for PMOSTEST!
2009-11-19 05:58:42 -- info: ============================== ghettoVCB LOG END ================================
Quiesce snapshot option and the method in which the flushing occurs is dependent on OS and whether or not you have VMware Tools installed. There's actually 3 methods and VSS is Windows only, for a deep dive on how VMware snapshots works, take a look at this VMware KB: http://kb.vmware.com/kb/1015180
The interrupt you're seeing is within the busybox console (unspported shell). Have you tried disable VM_SNAPSHOT_MEMORY and just enabling VM_SNAPSHOT_QUIESCE?
Note: VM_SNAPSHOT_MEMORY will dump the VMs state at the time of the snapshot but is not used for the backup, this is primarily for testing purposes and with this option enabled your snapshot takes longer to create + additional room for the memory state file. Generally you'll just enable VM_SNAPSHOT_QUIESCE
Is this occurring with only this VM or others? How large is the VM and what is it's OS?
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Here is the test run as you suggested - memory snap=off and quiesce =on
This is a centos 5.3 x86_64 approx 10GB - Vmware tools installed but not sync driver (i have to find out what that is
As you said it is quite a bit quicker with memory_snap off
esxi logs show:
Nov 19 21:50:15 Hostd: Trying quiesced snapshot via SYNC driver...
Nov 19 21:50:15 Hostd: Set called with key 'Config.GlobalSettings.guest.commands.sharedPolicyRefCount' value '1'
Nov 19 21:50:15 Hostd: Logging into guest.
Nov 19 21:50:15 Hostd: Dummy foundry callback #0
Nov 19 21:50:15 Hostd: About to run script: /usr/sbin/pre-freeze-script all
Nov 19 21:50:15 Hostd: Dummy foundry callback #1
Nov 19 21:50:15 Hostd: Script /usr/sbin/pre-freeze-script not found in VM.
Nov 19 21:50:15 Hostd: Dummy foundry callback #2
Nov 19 21:50:15 Hostd: About to engage SYNC driver, freeze Timeout 15 sec.
Nov 19 21:50:15 Hostd: Dummy foundry callback #3
Nov 19 21:50:15 Hostd: Sync driver not installed or not supported in guest.
Nov 19 21:50:15 Hostd: Starting to snapshot VM.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
/vmfs/volumes/4a7bc59f-d1dd8294-90ca-0019d1010534/tools # ./ghettoVCB.sh -f vms
2009-11-19 21:50:10 -- info: ============================== ghettoVCB LOG START ==============================
2009-11-19 21:50:10 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/msc009ds
2009-11-19 21:50:10 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 1
2009-11-19 21:50:10 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick
2009-11-19 21:50:10 -- info: CONFIG - ADAPTER_FORMAT = lsilogic
2009-11-19 21:50:10 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2009-11-19 21:50:10 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2009-11-19 21:50:10 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2009-11-19 21:50:10 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2009-11-19 21:50:10 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2009-11-19 21:50:10 -- info: CONFIG - LOG_LEVEL = info
2009-11-19 21:50:10 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout
2009-11-19 21:50:10 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2009-11-19 21:50:10 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 1
2009-11-19 21:50:10 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2009-11-19 21:50:14 -- info: Initiate backup for PMOSTEST
2009-11-19 21:50:14 -- info: Creating Snapshot "ghettoVCB-snapshot-2009-11-19" for PMOSTEST
Destination disk format: VMFS zeroedthick
Cloning disk '/vmfs/volumes/mnc053datastore/PMOSTEST/PMOS.vmdk'...
Clone: 100% done.
2009-11-19 21:56:33 -- info: Removing snapshot from PMOSTEST ...
2009-11-19 21:56:37 -- info: Backup Duration: 6.38 Minutes
2009-11-19 21:56:37 -- info: Successfully completed backup for PMOSTEST!
2009-11-19 21:56:37 -- info: ============================== ghettoVCB LOG END ================================
Yea when using the quiesce, it'll definitely be OS dependent. Look like in this case it was not able to use any of the drivers ...
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi William,
I started using your backup/restore script some days ago. I'm using thick disks, backup up to thin disks. I've noticed that shrinking in the VMWare Tools decreases backupsize alot:
9,0G ./Test-1/Test-1-2009-11-22--1
12G ./Test-1/Test-1-2009-11-22--2
Where --2 is before shrinking in vmware tools and --1 after. Is there a chance to get the shrink process in your Backup script? I searched your script repository but didn't find a script to run before the backup.
Greets
Peter
any update on this? I still can't back up more than 2 VMs at a time.
Last week the Backup didn't complete, probably because I did not have sufficient disk space on the backup destination. I had to kill the ghettoVCB process. According to the Log it was stuck with removing the snapshot, but the VM still is snapshotted and I can't remove the snapshot with the VI client. How can I remove the snapshot manually?
Ok, just created a new snapshot manually and deleted all after it.
Can you define what you mean by shrinking of VMware Tools? Are you using all default backup options
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
VMs will always be backed up one at a time, since the backup is occurring on the Service Console or busybox console, resources are being taken up and you don't want to impact the performance of your hypervisor across other VMs during backups. There was never any plans to do simultaneous VM backups
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
right - I understand that. and the script is doing these sequentially so there should never be an issue - this is why I don't understand why it fails on VM #3.
Hi William,
Is in the vmware tools: http://www.vmware.com/support/ws5/doc/img/w_tools_shrink_supportedand.png
(Not my pic, googled it)
Using the "prepare to shrink" the Backup shrinks as seen above.
I found this thread - but I'm not sure how to wrap this up in a script...
http://communities.vmware.com/thread/230108
Greets
Peter
Edit:
And yes, i'm using all default - except for the location
Hi pebr,
A Workaround to "shrink" disks is to use "2gbsparse" as disk format for backup.
Yes, you will have many files but you will not have "empty space"
Seb = = = o>°o
Hi Sebastian,
I use thin as a target-disk - this should "shrink" to the same size as "2gbsparse" - unless the shrink-method is called before backup. Ether by hand or by script
Or should 2gbsparse be really "thiner" than thin?
Greets
Peter
This depends on the target. From my experience you will not see reduced size with thin when using Win2k3 NFS services as target. With 2gbsparse in contrast you do.
Regards
goppi
I'm using Linux as Target.
I see reduced size! Even with Thin:
Disk: 40GB
Backup before "Shrink" in VMWare Tools: 12GB
Backup after "Shrink" in VMWare Tools: 9GB
Source: Thick
Destination: Thin (both times)
Nobody but me was using the virtual machine at this time, no files deleted, backup started directly before and after "Shrink" - so the reduced size must be from this.
Greets
Peter
From the link you reference, it sounds like this is something thats available via the APIs ... but probably not directly available on the Service Console or busybox console. I'll take a look as time permits
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
You'll need to locate the vmid by running the following command:
vmware-vim-cmd vmsvc/getallvms | grep -i <vmname> | awk '{print $1}'
then you need to specify the following to remove the snapshot (this assumes you only have 1 snapshot created by ghettoVCB)
vmware-vim-cmd vmsvc/snapshot.remove <vmid>
you could also use:
vmware-vim-cmd vmsvc/snapshot.removeall
which will just remove all snapshots (commit all)
As you know, you need to keep a close eye on your datastores from filling up else you'll have all sorts of fun with your VMs
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Please provide detail information about your environment and VM and run the backup with both debug and dryrun modes and remember to enclose the output in tags. Can't help without more information and remember to always provide this if you run into any issues/bugs, "not working" is not sufficient.
Also have you tried re-arranging the order of the VMs, is it always the 3rd one? Any issues with storage connectivity? Please do some level of troubleshooting prior to the run to ensure this is not environment issues.
Thanks
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Please advise on enabling debug AND dryrun modes.
FYI - have tested many potential issues, network etc. All looks OK. It is always the 3rd VM, regardless of the order of VMs and size of VMs
Please advise on enabling debug AND dryrun modes.
Please read the documentation for enabling debug and dryrun modes.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi,
I'm having some problems with the sleep iterations - its too fast...
2009-11-25 17:16:54 -- info: VM is still on - Iteration: 0 - sleeping for 60secs (Duration: 0 seconds)
2009-11-25 17:17:25 -- info: VM is still on - Iteration: 1 - sleeping for 60secs (Duration: 60 seconds)
As you can see - is just 30 seconds instead of 60. Machine is a Dual Xeon 5520 (HT enabled), ESXi4
Greets
Peter
Thanks for the info, I've just updated the script, it'll be sleep for 60seconds now per iteration. Remember this is controllable by modifying the variable called ITER_TO_WAIT_SHUTDOWN, by default it's set to 3 which means it'll sleep for 3 60-second iterations (3min) and you'll need to modify this based on your VMs/environment. If you need it to wait longer, go ahead and do a test manually and then configure it.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
OK - latest update. I have pulled the very latest version of ghettoVCB.sh and the problem has gone away. All VMs are backing up 100% OK.
Hi,
I would like to backup a VM that has 2 vmdk on differents datastores. Is it possible?
I made the configuration file with the option: VMDK_FILES_TO_BACKUP = "all" and I got the backup of the vmdk on the VMX_DIR, only.
How can I do it?
Congratulations for your great job!!
As mentioned before this is supported. The question is .. do you actually have the other VMDK attached to the VM?
Please re-run the backup but with the dry run flag.
e.g.
[root@himalaya ~]# ./ghettoVCB.sh -f recoveryvm -d dryrun 2009-11-26 08:51:29 -- info: ============================== ghettoVCB LOG START ============================== 2009-11-26 08:51:29 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS 2009-11-26 08:51:29 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2009-11-26 08:51:29 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick 2009-11-26 08:51:29 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2009-11-26 08:51:29 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2009-11-26 08:51:29 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2009-11-26 08:51:29 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2009-11-26 08:51:29 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2009-11-26 08:51:29 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2009-11-26 08:51:29 -- info: CONFIG - LOG_LEVEL = dryrun 2009-11-26 08:51:29 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout 2009-11-26 08:51:29 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2009-11-26 08:51:29 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2009-11-26 08:51:29 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2009-11-26 08:51:33 -- dryrun: ############################################### 2009-11-26 08:51:33 -- dryrun: Virtual Machine: vm-1 2009-11-26 08:51:33 -- dryrun: VM_ID: 5584 2009-11-26 08:51:33 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vm-1/vm-1.vmx 2009-11-26 08:51:33 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vm-1 2009-11-26 08:51:33 -- dryrun: VMX_CONF: vm-1/vm-1.vmx 2009-11-26 08:51:33 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage 2009-11-26 08:51:33 -- dryrun: VMDK(s): 2009-11-26 08:51:33 -- dryrun: /vmfs/volumes/4aa95d52-c297af51-90e2-003048d9586a/vm-1/vm-1.vmdk 2009-11-26 08:51:33 -- dryrun: vm-1.vmdk 2009-11-26 08:51:33 -- dryrun: ############################################### 2009-11-26 08:51:33 -- info: ============================== ghettoVCB LOG END ================================
You should see two VMDK(s) listed one of which will be within the .vmx directory and the other should be the path to the other datastore in which the VMDK resides.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Thanks for your reply.
I see only one VMDK as you can see:
19 -- info: ============================== ghettoVCB LOG START ==============================
2009-11-26 18:21:21 -- info: CONFIG - USING CONFIGURATION FILE = backup_config/Virtual Center Server
2009-11-26 18:21:21 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/Backup Storage/VMS_BACKUP
2009-11-26 18:21:21 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2009-11-26 18:21:21 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2009-11-26 18:21:21 -- info: CONFIG - ADAPTER_FORMAT = buslogic
2009-11-26 18:21:22 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2009-11-26 18:21:22 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2009-11-26 18:21:22 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2009-11-26 18:21:22 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2009-11-26 18:21:22 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2009-11-26 18:21:22 -- info: CONFIG - LOG_LEVEL = dryrun
2009-11-26 18:21:22 -- info: CONFIG - BACKUP_LOG_OUTPUT = /vmfs/volumes/Backup Storage/VMS_BACKUP/ghettoVCB.log
2009-11-26 18:21:22 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 1
2009-11-26 18:21:22 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2009-11-26 18:21:22 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2009-11-26 18:21:22 -- dryrun: ###############################################
2009-11-26 18:21:22 -- dryrun: Virtual Machine: Virtual Center Server
2009-11-26 18:21:22 -- dryrun: VM_ID: 32
2009-11-26 18:21:22 -- dryrun: VMX_PATH: /vmfs/volumes/VirtualMachines Storage/Virtual Center Server/Virtual Center Server.vmx
2009-11-26 18:21:22 -- dryrun: VMX_DIR: /vmfs/volumes/VirtualMachines Storage/Virtual Center Server
2009-11-26 18:21:22 -- dryrun: VMX_CONF: Virtual Center Server/Virtual Center Server.vmx
2009-11-26 18:21:22 -- dryrun: VMFS_VOLUME: VirtualMachines Storage
2009-11-26 18:21:22 -- dryrun: VMDK(s):
2009-11-26 18:21:23 -- dryrun: Virtual Center Server.vmdk
2009-11-26 18:21:23 -- dryrun: ###############################################
2009-11-26 18:21:23 -- info: ============================== ghettoVCB LOG END ================================
I don't know why the other VMDK, called "Virtual Center Server_1.vmdk", is not listed.
The location of the other VMDK is "/vmfs/volumes/System Storage/Virtual Center Server/Virtual Center Server_1.vmdk"
Are you 100% sure that the VM actually has the 2nd VMDK attached? If it's been removed, but not deleted it will not be enabled within the .vmx and the script will not see the 2nd VMDK.
I've just replicated a VM with a similar setup as yours and I'm able to see both VMDK(s) which is stored on two different datastores:
[root@himalaya ~]# ./ghettoVCB.sh -f recoveryvm -d dryrun 2009-11-26 10:26:21 -- info: ============================== ghettoVCB LOG START ============================== 2009-11-26 10:26:21 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS 2009-11-26 10:26:21 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2009-11-26 10:26:21 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick 2009-11-26 10:26:21 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2009-11-26 10:26:21 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2009-11-26 10:26:21 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2009-11-26 10:26:21 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2009-11-26 10:26:21 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2009-11-26 10:26:21 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2009-11-26 10:26:21 -- info: CONFIG - LOG_LEVEL = dryrun 2009-11-26 10:26:21 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout 2009-11-26 10:26:21 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2009-11-26 10:26:21 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2009-11-26 10:26:21 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2009-11-26 10:26:25 -- dryrun: ############################################### 2009-11-26 10:26:25 -- dryrun: Virtual Machine: stupid vm with spaces 2009-11-26 10:26:25 -- dryrun: VM_ID: 5616 2009-11-26 10:26:25 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SAS.Savvio/VirtualMachines Storage/stupid vm with spaces/stupid vm with spaces.vmx 2009-11-26 10:26:25 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SAS.Savvio/VirtualMachines Storage/stupid vm with spaces 2009-11-26 10:26:25 -- dryrun: VMX_CONF: VirtualMachines Storage/stupid vm with spaces/stupid vm with spaces.vmx 2009-11-26 10:26:25 -- dryrun: VMFS_VOLUME: himalaya-local-SAS.Savvio 2009-11-26 10:26:25 -- dryrun: VMDK(s): 2009-11-26 10:26:25 -- dryrun: /vmfs/volumes/4a48004d-f9af7fa0-5bbf-003048d9586b/System Storage/stupid vm with spaces/stupid vm with spaces_1.vmdk 2009-11-26 10:26:25 -- dryrun: stupid vm with spaces.vmdk 2009-11-26 10:26:25 -- dryrun: ############################################### 2009-11-26 10:26:25 -- info: ============================== ghettoVCB LOG END ================================
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I've got it. The disk is independent, and the ghettoVCB doesn't let you backup independent disks (independent VMDKs).
Thank you, very much!!
I like to e-mail the logfile to mysefl so i check up on it, instead of manually go looking for it.
I have ESXI and i don't know wether it can e-mail by itself. But i used a linux VM i am running to pull the logfile and mail it to me. The linux VM is set up with sendmail and mailhost is configured.
I have altered the GhettoVCB script to make the backups & logiles use this date syntax date +%F. I find it easier to read for humans. Please adjust the youruser and yourpass to valid login credentials for browsing the datastore trough https. Usually the user you login with directly on the ESXi. Also adjust the you@domain.tld, place your e-mail address. Pretty simple & basic but it works excellent. Last point, adjust the 192.168.1.253 to your ESXi's IP address.
#grab esxi backup log file and mail it v0.1 #Note the WGET part should be 1 line, no line breaks #- Adjust the youruser & yourpass to valid credentials for logging in to ESXi (browse the datastore) #- Adjust the IP address (192.168.1.253) to your ESXi ip address #- In the wget line below my logs where located in a folder called backup on a datastore called 750GBdisk2 #- You could check the syntax of the link by browsing to your datastore and locate the backup log files then look at the addressbar cd /tmp wget "https://192.168.1.253/folder/backup/ghettoVCB-backup-$(date +\%F).log?dcPath=ha-datacenter&dsName=750GBdisk2" --user youruser --password yourpass --no-check-certificate cat /tmp/ghettoVCB* | mail -s "Backup log ESXi4" you@domain.tld rm -rf /tmp/ghettoVCB*
i have put this in the crontab at the linux VM like this:
3 3 * * * /root/mailesxilog > /dev/null 2>&1
Hi lamw,
I started using the script on a regular base now and started to use Stangobien's (thanks!) script to pull the logfiles. Is there a way to add a loglevel not writing every %-step to the logfile? I'm backing up 5 machines - and just the %-lines are 500 lines... Getting a bit hard to read
Greets
Peter
I primarily have that information when users run into problems or provide a little bit more detail over the debugging mode. The default info mode is pretty quiet minus the configuration dump at the top, you can always parse out any lines that contains CONFIG which should reduce the number of the lines OR you can comment out the function call dumpVMConfigurations() depending if you're using individual VM backup policy or not.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I'm using the latest version of ghettVCB.sh, but my script will only backup the first VM in the list. I've tried changing the order in my server list, but still will only backup first VM. I can run a dryrun of the script and it sees the other VMs. I created the server list in Vi so I don't think it's a formatting issue.
I'm running ESXi 3.5
Here is my server list file:
~ # cat /vmfs/volumes/BackupsStore/vmbackups
LegalFiles
Sharepoint2008x64
FreeBSD71
~ #
Here are the results of my dryrun:
/vmfs/volumes/48f62e13-c6958ca2-6bc2-0022198dec59 # ./ghettoVCB.sh -f vmbackups -d dryrun
2009-12-01 18:36:07 -- info: ============================== ghettoVCB LOG START ==============================
2009-12-01 18:36:07 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/NFS
2009-12-01 18:36:07 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 5
2009-12-01 18:36:08 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2009-12-01 18:36:08 -- info: CONFIG - ADAPTER_FORMAT = lsilogic
2009-12-01 18:36:08 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2009-12-01 18:36:08 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2009-12-01 18:36:08 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2009-12-01 18:36:08 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2009-12-01 18:36:09 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2009-12-01 18:36:09 -- info: CONFIG - LOG_LEVEL = dryrun
2009-12-01 18:36:09 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout
2009-12-01 18:36:09 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2009-12-01 18:36:09 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 1
2009-12-01 18:36:09 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2009-12-01 18:36:26 -- dryrun: ###############################################
2009-12-01 18:36:26 -- dryrun: Virtual Machine: LegalFiles
2009-12-01 18:36:26 -- dryrun: VM_ID: 448
2009-12-01 18:36:26 -- dryrun: VMX_PATH: /vmfs/volumes/BackupsStore/LegalFiles/LegalFiles.vmx
2009-12-01 18:36:26 -- dryrun: VMX_DIR: /vmfs/volumes/BackupsStore/LegalFiles
2009-12-01 18:36:26 -- dryrun: VMX_CONF: LegalFiles/LegalFiles.vmx
2009-12-01 18:36:26 -- dryrun: VMFS_VOLUME: BackupsStore
2009-12-01 18:36:26 -- dryrun: VMDK(s):
2009-12-01 18:36:26 -- dryrun: LegalFiles_1.vmdk
2009-12-01 18:36:26 -- dryrun: LegalFiles.vmdk
2009-12-01 18:36:28 -- dryrun: ###############################################
2009-12-01 18:36:28 -- dryrun: ###############################################
2009-12-01 18:36:28 -- dryrun: Virtual Machine: Sharepoint2008x64
2009-12-01 18:36:28 -- dryrun: VM_ID: 432
2009-12-01 18:36:28 -- dryrun: VMX_PATH: /vmfs/volumes/BackupsStore/Sharepoint2008x64/Sharepoint2008x64.vmx
2009-12-01 18:36:28 -- dryrun: VMX_DIR: /vmfs/volumes/BackupsStore/Sharepoint2008x64
2009-12-01 18:36:28 -- dryrun: VMX_CONF: Sharepoint2008x64/Sharepoint2008x64.vmx
2009-12-01 18:36:28 -- dryrun: VMFS_VOLUME: BackupsStore
2009-12-01 18:36:28 -- dryrun: VMDK(s):
2009-12-01 18:36:28 -- dryrun: Sharepoint2008x64_1.vmdk
2009-12-01 18:36:28 -- dryrun: Sharepoint2008x64.vmdk
2009-12-01 18:36:28 -- dryrun: ###############################################
2009-12-01 18:36:28 -- dryrun: ###############################################
2009-12-01 18:36:28 -- dryrun: Virtual Machine: FreeBSD71
2009-12-01 18:36:28 -- dryrun: VM_ID: 208
2009-12-01 18:36:28 -- dryrun: VMX_PATH: /vmfs/volumes/BackupsStore/vmFreeBSDx64/vmFreeBSDx64.vmx
2009-12-01 18:36:28 -- dryrun: VMX_DIR: /vmfs/volumes/BackupsStore/vmFreeBSDx64
2009-12-01 18:36:28 -- dryrun: VMX_CONF: vmFreeBSDx64/vmFreeBSDx64.vmx
2009-12-01 18:36:28 -- dryrun: VMFS_VOLUME: BackupsStore
2009-12-01 18:36:28 -- dryrun: VMDK(s):
2009-12-01 18:36:28 -- dryrun: vmFreeBSDx64-000001.vmdk
2009-12-01 18:36:29 -- dryrun: ###############################################
2009-12-01 18:36:29 -- info: ============================== ghettoVCB LOG END ================================
Please edit your response before I take a look, no need to paste my entire script. You can say specify that you're using the latest version which can also be confirmed by looking at the modified date when running the script w/o any parameters.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I've removed the script.
Nope - working like a dream
Hi, thanks for you reply, just removed my comment, it was me s******* up, sorry 🐵
I'm still a little confused on why you're having this peculiar issue .... I'm going back through the replies and I see a message from you on Nov 18, 2009 6:59 AM stating that the new script has resolved the problem and you were able to take successful backups?
It sounds like this is may be something new? Can you take backups of each individual VM? If so, please to a full run and provide the output with debug mode enabled, I'll need to see what errors you're seeing and remember to wrap you output in tags
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
The problem I had 11/18 was related to multiple vmdk files not backing up. I didn't test the script with more than one VM until now. It appears that after the first VM backups up and compresses that the PUTTY session times out.
Here is my output:
/vmfs/volumes/48f62e13-c6958ca2-6bc2-0022198dec59 # ./ghettoVCB.sh -f vmbackups -d debug
2009-12-02 15:14:50 -- info: ============================== ghettoVCB LOG START ==============================
2009-12-02 15:14:50 -- debug: HOST BUILD: VMware ESX Server 3i 3.5.0 build-110271
2009-12-02 15:14:50 -- debug: HOSTNAME: esxios.advocacyinc.org
2009-12-02 15:14:50 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/NFS
2009-12-02 15:14:50 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 5
2009-12-02 15:14:50 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2009-12-02 15:14:50 -- info: CONFIG - ADAPTER_FORMAT = lsilogic
2009-12-02 15:14:50 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2009-12-02 15:14:50 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2009-12-02 15:14:50 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2009-12-02 15:14:50 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2009-12-02 15:14:50 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2009-12-02 15:14:50 -- info: CONFIG - LOG_LEVEL = debug
2009-12-02 15:14:50 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout
2009-12-02 15:14:50 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2009-12-02 15:14:50 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 1
2009-12-02 15:14:50 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
mkdir: Cannot create directory `/vmfs/volumes/NFS/': Input/output error
2009-12-02 15:15:16 -- info: Unable to create "/vmfs/volumes/NFS/LegalFiles"! - Ensure VM_BACKUP_VOLUME was defined correctly
/vmfs/volumes/48f62e13-c6958ca2-6bc2-0022198dec59 # ./ghettoVCB.sh -f vmbackups -d debug
2009-12-02 15:19:12 -- info: ============================== ghettoVCB LOG START ==============================
2009-12-02 15:19:12 -- debug: HOST BUILD: VMware ESX Server 3i 3.5.0 build-110271
2009-12-02 15:19:12 -- debug: HOSTNAME: esxios.advocacyinc.org
2009-12-02 15:19:12 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/NFS
2009-12-02 15:19:12 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 5
2009-12-02 15:19:12 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2009-12-02 15:19:12 -- info: CONFIG - ADAPTER_FORMAT = lsilogic
2009-12-02 15:19:12 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2009-12-02 15:19:12 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2009-12-02 15:19:12 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2009-12-02 15:19:12 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2009-12-02 15:19:12 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2009-12-02 15:19:12 -- info: CONFIG - LOG_LEVEL = debug
2009-12-02 15:19:12 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout
2009-12-02 15:19:12 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2009-12-02 15:19:12 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 1
2009-12-02 15:19:12 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2009-12-02 15:19:42 -- info: Initiate backup for LegalFiles
2009-12-02 15:19:42 -- info: Creating Snapshot "ghettoVCB-snapshot-2009-12-02" for LegalFiles
2009-12-02 15:19:59 -- debug: Waiting for snapshot "ghettoVCB-snapshot-2009-12-02" to be created
2009-12-02 15:19:59 -- debug: Snapshot timeout set to: 900 seconds
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/BackupsStore/LegalFiles/LegalFiles_1.vmdk'...
Clone: 100% done.
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/BackupsStore/LegalFiles/LegalFiles.vmdk'...
Clone: 100% done.
2009-12-02 15:42:51 -- info: Removing snapshot from LegalFiles ...
2009-12-02 15:42:51 -- info: Compressing VM backup "/vmfs/volumes/NFS/LegalFiles/LegalFiles-2009-12-02.gz"...
I already see a problem and this looks like an environment issue:
mkdir: Cannot create directory `/vmfs/volumes/NFS/': Input/output error
If you do a search within all the posts, few individuals have had similar error messages relating to other things and this is usually an issue with their NFS server. Ensure you're not saturating the link and that your NFS server is configure optimally, for NFS setups please direct to the main VMTN forum.
The other thing you mentioned is a putty timeout ... again this has nothing to do with the script, if you have timeouts setup on your server, then you'll need to either modify that or run the command in the background and check back later to see the status of the process.
So far everything is pointing to the environment and not with the script as I had thought since the issue reporting does not make much sense if you can backup one VM but no other VMs afterwards. Please take a look over your configurations and try again and let me know if you've resolved any of these issues listed.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I also encounter sporadic input/output errors and try to trackdown the problem.
Could you try the following and report back:
Do not us a persistent NFS datastore configured from within VI-Client but let it mount by the script using the ENABLE_NON_PERSISTENT_NFS variable.
So far it seems that this cured the problem in our case.
BTW: Has anybody successfully mounted an NFS datastore by using the busybox mount command. The reason is that the mount command supports async mode which could help increasing backup throughput.
goppi.
hi,
first: please excuse my english, it´s not very well.
second: thanks for the script to backup vms on an esxi.
i have a problem with the script:
i loaded the script (date 11/01/2008) and made my changes (nfs, rotation, compression,...). i thougt the script works fine, but after three days the script stopped.
in log-file i found "Snapshot found for VM01, backup will not take place". i found an answer which describes, i have to create a snapshot in vSphere and than remove all snapshots.
after this, the backup worked for two days and i got the same error.
i never made a snapshot manually. so it looks like the snapshot which is created by the script will not be removed.
i found a workaround from davidpyper (Sep 28, 2009) but i did not try this.
i will not make snapshots manually in future, so i think, i can try this workaround, can´t i?
i have to add i´m a unix noob.
but lamw writes "...snapshot.removeall is a blocking function because snapshot.remove is not and you could run into a situation where you'll have multiple backups completing and committing multiple snapshots which could hinder performance."
im not shure if i shoud try this...
but i don´t know why the snapshots created by the script will not be removed and i can´t remove these snapshots every day manually...
so, has anyone an idea what i can do?
(i hope my english was good enough that anyone understand my problem)
Hi,
I think I understand the general issue, snapshots not being removed ... I ask that issues, you run the script in debugging mode and dryrun mode and paste the output ENSURING you wrap them in tags for readability. Without any logs, I can't really help you and also make sure you're using the latest version of the script AND that if enable VM_SNAPSHOT_MEMORY, both the creation/commit of the snapshot may take much longer and in general, this should be disabled. I only bring this up because there might be something funky going on when comitting the snapshot and perhaps it never finishes and hence the snapshot is left behind.
In general, this should not be the case as in the current implementation of the script, it should loop in definite to try to commit the snapshot but if it runs out of space or something, it may not finish the commit.
Thanks
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
goppi - That worked! I enabled the non persistent settings for NFS.
I also turned off compression so I'll turn that back on a test again to make sure, but it seems to be working.
thanks.
Thankyou, Thankyou, Thankyou!
This script does exactly what I needed, I have just backed up my entire VM Inventory on My ESXi 4 server in less than 15 minutes and it didn't cost me anything!
I really appreciate all your hard work on this script, your community salutes you!
Your new biggest fan
Scott
Glad to hear everything is working out
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
hi lamw,
thanks für yoru response and help.
i saw, i had a very old version from the script.
now i downloaded the newest from here. but i get errors when i try to execute the script:
/backup # ./ghettoVCB.sh -f vmserver.list
: not found.sh: line 6:
: not found.sh: line 8:
: not found.sh: line 11:
: not found.sh: line 18:
: not found.sh: line 21:
: not found.sh: line 26:
: not found.sh: line 29:
: not found.sh: line 34:
: not found.sh: line 38:
: not found.sh: line 41:
: not found.sh: line 45:
: not found.sh: line 48:
: not found.sh: line 51:
: not found.sh: line 54:
: not found.sh: line 59:
: not found.sh: line 61:
: not found.sh: line 64:
: not found.sh: line 67:
: not found.sh: line 70:
: not found.sh: line 73:
: not found.sh: line 75:
: not found.sh: line 76:
: not found.sh: line 78:
: not found.sh: line 83:
: not found.sh: line 86:
: not found.sh: line 87:
###############################################################################
#
ghettoVCB for ESX/ESXi 3.5 & 4.x+
Author: William Lam
Created: 11/17/2008
Last modified: 11/14/2009
#
###############################################################################
: not found.sh: line 98: echo
Usage: ./ghettoVCB.sh -f -c -l
: not found.sh: line 100: echo
OPTIONS:
-f List of VMs to backup
-c Configuration directory for VM backups
-l File to output logging
-d Debug level info (default: info)
: not found.sh: line 106: echo
(e.g.)
Backup VMs stored in a list
./ghettoVCB.sh -f vms_to_backup
Backup VMs based on specific configuration located in directory
./ghettoVCB.sh -f vms_to_backup -c vm_backup_configs
Output will log to /tmp/ghettoVCB.log
./ghettoVCB.sh -f vms_to_backup -l /tmp/ghettoVCB.log
Dry run (no backup will take place)
./ghettoVCB.sh -f vms_to_backup -d dryrun
: not found.sh: line 116: echo
./ghettoVCB.sh: exit: line 117: Illegal number: 1
/backup #
(i don´t know how i have to use code-tags)
when i edit the script with vi, i saw ^M at the end of every line. is this correct?
///edit
\
so, i solved the problem ": not found.sh: line".
now i test if snapshots will be remoove...
Hello everybody!
First of all: Thank you for that script.
But I have a problem with it:
I have a backup list with the following content:
VM1
VM2
VM3
Without compression everything works fine.
But if I enabel compression, only the first vm in the list is backuped.
The last entry of the logfiles shows:
"Compressing..."
After this there is no more entry for another vm and the script seems to stop.
What could be the reason?
Greetz,
Wolfsrudel
Please post the full debug / dry run log, without additional information, it's hard to help. Also remember to wrap the output in tags that is ... use "squiggly braces"
How big are each of the VM backups? We've verified compression up an initial VM up to 100GB but nothing larger, the other thing is are you doing this manually or automating it through a cron or scheduled task, ensure you're not getting disconnected due to any type of timeouts as the compression does take awhile and ensure you have sufficient space on your destination storage
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I'm trying to backup a VM with Win03Server but I have some problem.
It has just one thik hard disk.
This is the debug log
2009-12-10 11:38:55 -- info: ============================== ghettoVCB LOG START ==============================
2009-12-10 11:38:55 -- debug: HOST BUILD: VMware ESXi 4.0.0 build-181792
2009-12-10 11:38:55 -- debug: HOSTNAME: DELLESX.gruppoanthea.local
2009-12-10 11:38:56 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2009-12-10 11:38:56 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 1
2009-12-10 11:38:56 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick
2009-12-10 11:38:56 -- info: CONFIG - ADAPTER_FORMAT = buslogic
2009-12-10 11:38:56 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2009-12-10 11:38:56 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2009-12-10 11:38:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2009-12-10 11:38:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2009-12-10 11:38:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2009-12-10 11:38:57 -- info: CONFIG - LOG_LEVEL = debug
2009-12-10 11:38:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = web01.log
2009-12-10 11:38:58 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2009-12-10 11:38:58 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2009-12-10 11:38:58 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2009-12-10 11:39:01 -- info: Initiate backup for web01
2009-12-10 11:39:01 -- info: Creating Snapshot "ghettoVCB-snapshot-2009-12-10" for web01
2009-12-10 11:39:03 -- debug: Waiting for snapshot "ghettoVCB-snapshot-2009-12-10" to be created
2009-12-10 11:39:03 -- debug: Snapshot timeout set to: 900 seconds
2009-12-10 11:39:05 -- debug: Waiting for snapshot creation to be completed - Iteration: 0 - sleeping for 60secs (Duration: 0 seconds)
Failed to clone disk : The file already exists (39).
Destination disk format: VMFS zeroedthick
Cloning disk '/vmfs/volumes/datastore1/web01/web01.vmdk'...
2009-12-10 11:40:11 -- info: Removing snapshot from web01 ...
P.s. I backup other 10 VMs on the same ESX without problems
Looks like the issue is that the VM is taking way to long on creating the snapshot and the default timeout is set to 900secs (15min). How much memory does this VM have? Can you try to manually create a snapshot and monitor the time of the request and the time of completion. This is why it's failing the backup
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".