This script performs backups of virtual machines residing on ESX(i) 3.5/4.x/5.x/6.x/7.x servers using methodology similar to VMware's VCB tool. The script takes snapshots of live running virtual machines, backs up the master VMDK(s) and then upon completion, deletes the snapshot until the next backup. The only caveat is that it utilizes resources available to the Service Console of the ESX server or Busybox Console (Tech Support Mode) of the ESXi server running the backups as opposed to following the traditional method of offloading virtual machine backups through a VCB proxy.
This script has been tested on ESX 3.5/4.x/5.x and ESXi 3.5/4.x/5.x/6.x/7.x and supports the following backup mediums: LOCAL STORAGE, SAN and NFS. The script is non-interactive and can be setup to run via cron. Currently, this script accepts a text file that lists the display names of virtual machine(s) that are to be backed up. Additionally, one can specify a folder containing configuration files on a per VM basis for granular control over backup policies.
Additionally, for ESX(i) environments that don't have persistent NFS datastores designated for backups, the script offers the ability to automatically connect the ESX(i) server to a NFS exported folder and then upon backup completion, disconnect it from the ESX(i) server. The connection is established by creating an NFS datastore link which enables monolithic (or thick) VMDK backups as opposed to using the usual *nix mount command which necessitates breaking VMDK files into the 2gbsparse format for backup. Enabling this mode is self-explanatory and will evidently be so when editing the script (Note: VM_BACKUP_VOLUME variable is ignored if ENABLE_NON_PERSISTENT_NFS=1 ).
In its current configuration, the script will allow up to 3 unique backups of the Virtual Machine before it will overwrite the previous backups; this however, can be modified to fit procedures if need be. Please be diligent in running the script in a test or staging environment before using it on production live Virtual Machines; this script functions well within our environment but there is a chance that it may not fit well into other environments.
If you have any questions, you may post in the dedicated ghettoVCB VMTN community group.
If you have found this script to be useful and would like to contribute back, please click here to donate.
Please read ALL documentation + FAQ's before posting a question about an issue or problem. Thank You
1) Download ghettoVCB from github by clicking on the ZIP button at the top and upload to either your ESX or ESXi system (use scp or WinSCP to transfer the file)
2) Extract the contents of the zip file (filename will vary):
# unzip ghettoVCB-master.zip
Archive: ghettoVCB-master.zip
creating: ghettoVCB-master/
inflating: ghettoVCB-master/README
inflating: ghettoVCB-master/ghettoVCB-restore.sh
inflating: ghettoVCB-master/ghettoVCB-restore_vm_restore_configuration_template
inflating: ghettoVCB-master/ghettoVCB-vm_backup_configuration_template
inflating: ghettoVCB-master/ghettoVCB.conf
inflating: ghettoVCB-master/ghettoVCB.sh
3) The script is now ready to be used and is located in a directory named ghettoVCB-master
# ls -l
-rw-r--r-- 1 root root 281 Jan 6 03:58 README
-rw-r--r-- 1 root root 16024 Jan 6 03:58 ghettoVCB-restore.sh
-rw-r--r-- 1 root root 309 Jan 6 03:58 ghettoVCB-restore_vm_restore_configuration_template
-rw-r--r-- 1 root root 356 Jan 6 03:58 ghettoVCB-vm_backup_configuration_template
-rw-r--r-- 1 root root 631 Jan 6 03:58 ghettoVCB.conf
-rw-r--r-- 1 root root 49375 Jan 6 03:58 ghettoVCB.sh
4) Before using the scripts, you will need to enable the execute permission on both ghettoVCB.sh and ghettoVCB-restore.sh by running the following:
chmod +x ghettoVCB.shchmod +x ghettoVCB-restore.sh
The following variables need to be defined within the script or in VM backup policy prior to execution.
Defining the backup datastore and folder in which the backups are stored (if folder does not exist, it will automatically be created):
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
Defining the backup disk format (zeroedthick, eagerzeroedthick, thin, and 2gbsparse are available):
DISK_BACKUP_FORMAT=thin
Note: If you are using the 2gbsparse on an ESXi 5.1 host, backups may fail. Please download the latest version of the ghettoVCB script which automatically resolves this or take a look at this article for the details.
Defining the backup rotation per VM:
VM_BACKUP_ROTATION_COUNT=3
Defining whether the VM is powered down or not prior to backup (1 = enable, 0 = disable):
Note: VM(s) that are powered off will not require snapshoting
POWER_VM_DOWN_BEFORE_BACKUP=0
Defining whether the VM can be hard powered off when "POWER_VM_DOWN_BEFORE_BACKUP" is enabled and VM does not have VMware Tools installed
ENABLE_HARD_POWER_OFF=0
If "ENABLE_HARD_POWER_OFF" is enabled, then this defines the number of (60sec) iterations the script will before executing a hard power off when:
ITER_TO_WAIT_SHUTDOWN=3
The number (60sec) iterations the script will wait when powering off the VM and will give up and ignore the particular VM for backup:
POWER_DOWN_TIMEOUT=5
The number (60sec) iterations the script will wait when taking a snapshot of a VM and will give up and ignore the particular VM for backup:
Note: Default value should suffice
SNAPSHOT_TIMEOUT=15
Defining whether or not to enable compression (1 = enable, 0 = disable):
ENABLE_COMPRESSION=0
NOTE: With ESXi 3.x/4.x/5.x, there is a limitation of the maximum size of a VM for compression within the unsupported Busybox Console which should not affect backups running classic ESX 3.x,4.x or 5.x. On ESXi 3.x the largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
Defining the adapter type for backed up VMDK (DEPERCATED - NO LONGER NEEDED😞
ADAPTER_FORMAT=buslogic
Defining whether virtual machine memory is snapped and if quiescing is enabled (1 = enable, 0 = disable):
Note: By default both are disabled
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
NOTE: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relevant to the actual snapshot and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
Defining VMDK(s) to backup from a particular VM either a list of vmdks or "all"
VMDK_FILES_TO_BACKUP="myvmdk.vmdk"
Defining whether or not VM(s) with existing snapshots can be backed up. This flag means it will CONSOLIDATE ALL EXISTING SNAPSHOTS for a VM prior to starting the backup (1 = yes, 0 = no):
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
Defining the order of which VM(s) should be shutdown first, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_SHUTDOWN_ORDER=vm1,vm2,vm3
Defining the order of VM(s) that should be started up first after backups have completed, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_STARTUP_ORDER=vm3,vm2,vm1
Defining NON-PERSISTENT NFS Backup Volume (1 = yes, 0 = no):
ENABLE_NON_PERSISTENT_NFS=0
NOTE: This is meant for environments that do not want a persisted connection to their NFS backup volume and allows the NFS volume to only be mounted during backups. The script expects the following 5 variables to be defined if this is to be used: UNMOUNT_NFS, NFS_SERVER, NFS_MOUNT, NFS_LOCAL_NAME and NFS_VM_BACKUP_DIR
Defining whether or not to unmount the NFS backup volume (1 = yes, 0 = no):
UNMOUNT_NFS=0
Defining the NFS server address (IP/hostname):
NFS_SERVER=172.51.0.192
Defining the NFS export path:
NFS_MOUNT=/upload
Defining the NFS datastore name:
NFS_LOCAL_NAME=backup
Defining the NFS backup directory for VMs:
NFS_VM_BACKUP_DIR=mybackups
NOTE: Only supported if you are running vSphere 4.1 and this feature is experimental. If you are having issues with sending mail, please take a look at Email Backup Log section
Defining whether or not to email backup logs (1 = yes, 0 = no):
EMAIL_LOG=1
Defining whether or not to email message will be deleted off the host whether it is successful in sending, this is used for debugging purposes. (1 = yes, 0 = no):
EMAIL_DEBUG=1
Defining email server:
EMAIL_SERVER=auroa.primp-industries.com
Defining email server port:
EMAIL_SERVER_PORT=25
Defining email delay interval (useful if you have slow SMTP server and would like to include a delay in netcat using -i param, default is 1second):
EMAIL_DELAY_INTERVAL=1
Defining recipient of the email:
EMAIL_TO=auroa@primp-industries.com
Defining from user which may require specific domain entry depending on email server configurations:
EMAIL_FROM=root@ghettoVCB
Defining to support RSYNC symbolic link creation (1 = yes, 0 = no):
RSYNC_LINK=0
Note: This enables an automatic creation of a generic symbolic link (both a relative & absolution path) in which users can refer to run replication backups using rsync from a remote host. This does not actually support rsync backups with ghettoVCB. Please take a look at the Rsync Section of the documentation for more details.
# cat ghettoVCB.conf
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=3
POWER_DOWN_TIMEOUT=5
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
ENABLE_NON_PERSISTENT_NFS=0
UNMOUNT_NFS=0
NFS_SERVER=172.30.0.195
NFS_MOUNT=/nfsshare
NFS_LOCAL_NAME=nfs_storage_backup
NFS_VM_BACKUP_DIR=mybackups
SNAPSHOT_TIMEOUT=15
EMAIL_LOG=0
EMAIL_SERVER=auroa.primp-industries.com
EMAIL_SERVER_PORT=25
EMAIL_DELAY_INTERVAL=1
EMAIL_TO=auroa@primp-industries.com
EMAIL_FROM=root@ghettoVCB
WORKDIR_DEBUG=0
VM_SHUTDOWN_ORDER=
VM_STARTUP_ORDER=
To override any existing configurations within the ghettoVCB.sh script and to use a global configuration file, user just needs to specify the new flag -g and path to global configuration file (For an example, please refer to the sample execution section of the documenation)
Running multiple instances of ghettoVCB is now supported with the latest release by specifying the working directory (-w) flag.
By default, the working directory of the ghettoVCB instance is /tmp/ghettoVCB.work and you can run another instance by providing an alternate working directory. You should try to minimize the number of ghettoVCB instances running on your ESXi host as it does consume some amount of resources when running in the ESXi Shell. This is considered an experimental feature, so please test in a development environment to ensure everything is working prior to moving to production system.
Ensure that you do not edit past this section:
########################## DO NOT MODIFY PAST THIS LINE ##########################
# ./ghettoVCB.sh
###############################################################################
#
# ghettoVCB for ESX/ESXi 3.5, 4.x+ and 5.x
# Author: William Lam
# http://www.virtuallyghetto.com/
# Documentation: http://communities.vmware.com/docs/DOC-8760
# Created: 11/17/2008
# Last modified: 2012_12_17 Version 0
#
###############################################################################
Usage: ghettoVCB.sh [options]
OPTIONS:
-a Backup all VMs on host
-f List of VMs to backup
-m Name of VM to backup (overrides -f)
-c VM configuration directory for VM backups
-g Path to global ghettoVCB configuration file
-l File to output logging
-w ghettoVCB work directory (default: )
-d Debug level [info|debug|dryrun] (default: info)
(e.g.)
Backup VMs stored in a list
./ghettoVCB.sh -f vms_to_backup
Backup a single VM
./ghettoVCB.sh -m vm_to_backup
Backup all VMs residing on this host
./ghettoVCB.sh -a
Backup all VMs residing on this host except for the VMs in the exclusion list
./ghettoVCB.sh -a -e vm_exclusion_list
Backup VMs based on specific configuration located in directory
./ghettoVCB.sh -f vms_to_backup -c vm_backup_configs
Backup VMs using global ghettoVCB configuration file
./ghettoVCB.sh -f vms_to_backup -g /global/ghettoVCB.conf
Output will log to /tmp/ghettoVCB.log (consider logging to local or remote datastore to persist logs)
./ghettoVCB.sh -f vms_to_backup -l /vmfs/volume/local-storage/ghettoVCB.log
Dry run (no backup will take place)
./ghettoVCB.sh -f vms_to_backup -d dryrun
The input to this script is a file that contains the display name of the virtual machine(s) separated by a newline. When creating this file on a non-Linux/UNIX system, you may introduce ^M character which can cause the script to miss-behave. To ensure this does not occur, plesae create the file on the ESX/ESXi host.
Here is a sample of what the file would look like:
[root@himalaya ~]# cat vms_to_backup
vCOPS
vMA
vCloudConnector
Debug Mode
Note: This execution mode provides a qucik summary of details on whether a given set of VM(s)/VMDK(s) will be backed up. It provides additional information such as VMs that may have snapshots, VMDK(s) that are configured as independent disks, or other issues that may cause a VM or VMDK to not backed up.
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d dryrun
Logging output to "/tmp/ghettoVCB-2011-03-13_15-19-57.log" ...
2011-03-13 15:19:57 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:19:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:19:57 -- info: CONFIG - GHETTOVCB_PID = 30157
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-19-57
2011-03-13 15:19:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:19:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:19:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:19:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:19:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:19:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:19:57 -- info: CONFIG - LOG_LEVEL = dryrun
2011-03-13 15:19:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-19-57.log
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:19:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:19:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:19:57 -- info:
2011-03-13 15:19:57 -- dryrun: ###############################################
2011-03-13 15:19:57 -- dryrun: Virtual Machine: scofield
2011-03-13 15:19:57 -- dryrun: VM_ID: 704
2011-03-13 15:19:57 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield
2011-03-13 15:19:57 -- dryrun: VMX_CONF: scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:57 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: scofield_3.vmdk 3 GB
2011-03-13 15:19:58 -- dryrun: scofield_2.vmdk 2 GB
2011-03-13 15:19:58 -- dryrun: scofield_1.vmdk 1 GB
2011-03-13 15:19:58 -- dryrun: scofield.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 11 GB
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vMA
2011-03-13 15:19:58 -- dryrun: VM_ID: 1440
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: vMA-000002.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 5 GB
2011-03-13 15:19:58 -- dryrun: Snapshots found for this VM, please commit all snapshots before continuing!
2011-03-13 15:19:58 -- dryrun: THIS VIRTUAL MACHINE WILL NOT BE BACKED UP DUE TO EXISTING SNAPSHOTS!
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vCloudConnector
2011-03-13 15:19:58 -- dryrun: VM_ID: 2064
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector.vmdk 3 GB
2011-03-13 15:19:59 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector_1.vmdk 40 GB
2011-03-13 15:19:59 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 3 GB
2011-03-13 15:19:59 -- dryrun: Snapshots can not be taken for indepdenent disks!
2011-03-13 15:19:59 -- dryrun: THIS VIRTUAL MACHINE WILL NOT HAVE ALL ITS VMDKS BACKED UP!
2011-03-13 15:19:59 -- dryrun: ###############################################
2011-03-13 15:19:59 -- info: ###### Final status: OK, only a dryrun. ######
2011-03-13 15:19:59 -- info: ============================== ghettoVCB LOG END ================================
In the example above, we have 3 VMs to be backed up:
Note: This execution modes provides more in-depth information about environment/backup process including additional storage debugging information which provides information about both the source/destination datastore pre and post backups. This can be very useful in troubleshooting backups
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d debug
Logging output to "/tmp/ghettoVCB-2011-03-13_15-27-59.log" ...
2011-03-13 15:27:59 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:27:59 -- debug: Succesfully acquired lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:27:59 -- debug: HOST VERSION: VMware ESX 4.1.0 build-260247
2011-03-13 15:27:59 -- debug: HOST LEVEL: VMware ESX 4.1.0 GA
2011-03-13 15:27:59 -- debug: HOSTNAME: himalaya.primp-industries.com
2011-03-13 15:27:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:27:59 -- info: CONFIG - GHETTOVCB_PID = 31074
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-27-59
2011-03-13 15:27:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:27:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:27:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:27:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:27:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:27:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:27:59 -- info: CONFIG - LOG_LEVEL = debug
2011-03-13 15:27:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-27-59.log
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:27:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:27:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:27:59 -- info:
2011-03-13 15:28:01 -- debug: Storage Information before backup:
2011-03-13 15:28:01 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:01 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:28:01 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:28:01 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:02 -- info: Initiate backup for scofield
2011-03-13 15:28:02 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_3.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk'...
Clone: 37% done.
2011-03-13 15:28:04 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_2.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 85% done.
2011-03-13 15:28:05 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_1.vmdk"
2011-03-13 15:28:06 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk'...
Clone: 78% done.
2011-03-13 15:29:52 -- info: Backup Duration: 1.83 Minutes
2011-03-13 15:29:52 -- info: Successfully completed backup for scofield!
2011-03-13 15:29:54 -- debug: Storage Information after backup:
2011-03-13 15:29:54 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:54 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:54 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:54 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:55 -- debug: Storage Information before backup:
2011-03-13 15:29:55 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:55 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:55 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:29:57 -- debug: Storage Information before backup:
2011-03-13 15:29:57 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:57 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:57 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:57 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:58 -- info: Initiate backup for vCloudConnector
2011-03-13 15:29:58 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vCloudConnector/vCloudConnector-2011-03-13_15-27-59/vCloudConnector.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 97% done.
2011-03-13 15:30:45 -- info: Backup Duration: 47 Seconds
2011-03-13 15:30:45 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:30:45 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:30:45 -- debug: Succesfully removed lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:30:45 -- info: ============================== ghettoVCB LOG END ================================
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup
# ./ghettoVCB.sh -m MyVM
/ghettoVCB # ./ghettoVCB.sh -a
/ghettoVCB # ./ghettoVCB.sh -a -e vm_exclusion_list
1. Create folder to hold individual VM backup policies (can be named anything):
[root@himalaya ~]# mkdir backup_config
2. Create individual VM backup policies for each VM that ensure each file is named exactly as the display name of the VM being backed up (use provided template to create duplicates):
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template scofield
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template vCloudConnector
Listing of VM backup policy within backup configuration directory
[root@himalaya backup_config]# ls
scofield vCloudConnector
ghettoVCB-vm_backup_configuration_template
Backup policy for "scofield" (backup only 2 specific VMDKs)
[root@himalaya backup_config]# cat scofield
scofield_2.vmdk,scofield_1.vmdk
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Backup policy for VM "vCloudConnector" (backup all VMDKs found)
[root@himalaya backup_config]# cat
vCloudConnectorVM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
vCloudConnector.vmdk
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Note: When specifying -c option (individual VM backup policy mode) if a VM is listed in the backup list but DOES NOT have a corresponding backup policy, the VM will be backed up using the default configuration found within the ghettoVCB.sh script.
Execution of backup
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup -c backup_config -l /tmp/ghettoVCB.log
2011-03-13 15:40:50 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:40:51 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//scofield
2011-03-13 15:40:51 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:51 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:51 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:51 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:51 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:51 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:51 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:51 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:51 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:51 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:51 -- info: CONFIG - VMDK_FILES_TO_BACKUP = scofield_2.vmdk,scofield_1.vmdk
2011-03-13 15:40:51 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:51 -- info:
2011-03-13 15:40:53 -- info: Initiate backup for scofield
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 100% done.
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk'...
Clone: 100% done.
2011-03-13 15:40:55 -- info: Backup Duration: 2 Seconds
2011-03-13 15:40:55 -- info: Successfully completed backup for scofield!
2011-03-13 15:40:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:57 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:40:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:57 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:40:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:57 -- info:
2011-03-13 15:40:59 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:40:59 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//vCloudConnector
2011-03-13 15:40:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:59 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:59 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = vCloudConnector.vmdk
2011-03-13 15:40:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:59 -- info:
2011-03-13 15:41:01 -- info: Initiate backup for vCloudConnector
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 100% done.
2011-03-13 15:41:51 -- info: Backup Duration: 50 Seconds
2011-03-13 15:41:51 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:41:51 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:41:51 -- info: ============================== ghettoVCB LOG END ================================
Please take a look at FAQ #25 for more details before continuing
To make use of this feature, modify the variable ENABLE_COMPRESSION from 0 to 1. Please note, do not mix uncompressed backups with compressed backups. Ensure that directories selected for backups do not contain any backups with previous versions of ghettoVCB before enabling and implementing the compressed backups feature.
nc (netcat) utility must be present for email support to function, this utility is a now a default with the release of vSphere 4.1 or greater, previous releases of VI 3.5 and/or vSphere 4.0 does not contain this utility. The reason this is listed as experimental is it may not be compatible with all email servers as the script utlizes nc (netcat) utility to communicate to an email server. This feature is provided as-is with no guarantees. If you enable this feature, a separate log will be generated along side any normal logging which will be used to email recipient. If for whatever reason, the email fails to send, an entry will appear per the normal logging mechanism.
Users should also make note due to limited functionality of netcat, it uses SMTP pipelining which is not the most ideal method of communicating with an SMTP server. Email from ghettoVCB may not work if your email server does not support this feature.
You can define an email recipient in the following two ways:
EMAIL_TO=william@virtuallyghetto.com
OR
EMAIL_TO=william@virtuallyghetto.com,tuan@virtuallyghetto.com
If you are running ESXi 5.1, you will need to create a custom firewall rule to allow your email traffic to go out which I will assume is default port 25. Here are the steps for creating a custom email rule.
Step 1 - Create a file called /etc/vmware/firewall/email.xml with contains the following:
<ConfigRoot>
<service>
<id>email</id>
<rule id="0000">
<direction>outbound</direction>
<protocol>tcp</protocol>
<porttype>dst</porttype>
<port>25</port>
</rule>
<enabled>true</enabled>
<required>false</required>
</service>
</ConfigRoot>
Step 2 - Reload the ESXi firewall by running the following ESXCLI command:
~ #
esxcli network firewall refresh
Step 3 - Confirm that your email rule has been loaded by running the following ESXCLI command:
~ # esxcli network firewall ruleset list | grep email
email true
Step 4 - Connect to your email server by usingn nc (netcat) by running the following command and specifying the IP Address/Port of your email server:
~ # nc 172.30.0.107 25
220 mail.primp-industries.com ESMTP Postfix
You should recieve a response from your email server and you can enter Ctrl+C to exit. This custom ESXi firewall rule will not persist after a reboot, so you should create a custom VIB to ensure it persists after a system reboot. Please take a look at this article for the details.
To make use of this feature, modify the variable RSYNC_LINK from 0 to 1. Please note, this is an experimental feature request from users that rely on rsync to replicate changes from one datastore volume to another datastore volume. The premise of this feature is to have a standardized folder that rsync can monitor for changes to replicate to another backup datastore. When this feature is enabled, a symbolic link will be generated with the format of "<VMNAME>-symlink" and will reference the latest successful VM backup. You can then rely on this symbolic link to watch for changes and replicate to your backup datastore.
Here is an example of what this would look like:
[root@himalaya ghettoVCB]# ls -la /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/
total 0
drwxr-xr-x 1 nobody nobody 110 Sep 27 08:08 .
drwxr-xr-x 1 nobody nobody 17 Sep 16 14:01 ..
lrwxrwxrwx 1 nobody nobody 89 Sep 27 08:08 vcma-symlink -> /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/vcma-2010-09-27_08-07-37
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:04 vcma-2010-09-27_08-04-26
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:06 vcma-2010-09-27_08-05-55
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:08 vcma-2010-09-27_08-07-37
FYI - This feature has not been tested, please provide feedback if this does not work as expected.
To recover a VM that has been processed by ghettoVCB, please take a look at this document: Ghetto Tech Preview - ghettoVCB-restore.sh - Restoring VM's backed up from ghettoVCB to ESX(i) 3.5, ...
There may be a situation where you need to stop the ghettoVCB process and entering Ctrl+C will only kill off the main ghettoVCB process, however there may still be other spawn processes that you may need to identify and stop. Below are two scenarios you may encounter and the process to completely stop all processes related to ghettoVCB.
Step 1 - Press Ctrl+C which will kill off the main ghettoVCB instance
Step 2 - Search for any existing ghettoVCB process by running the following:
# ps -c | grep ghettoVCB | grep -v grep
3360136 3360136 tail tail -f /tmp/ghettoVCB.work/ghettovcb.Cs1M1x
Step 3 - Here we can see there is a tail command that was used in the script. We need to stop this process by using the kill command which accepts the PID (Process ID) which is identified by the first value on the far left hand side of the command. In this example, it is 3360136.
# kill -9 3360136
Note: Make sure you identify the correct PID, else you could accidently impact a running VM or worse your ESXi host.
Step 4 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Step 1 - Search for the ghettoVCB process (you can also validate the PID from the logs)
~ # ps -c | grep ghettoVCB | grep -v grep
3360393 3360393 busybox ash ./ghettoVCB.sh -f list -d debug
3360790 3360790 tail tail -f /tmp/ghettoVCB.work/ghettovcb.deGeB7
Step 2 - Stop both the main ghettoVCB instance & tail command by using the kill command and specifying their respective PID IDs:
kill -9 3360393
kill -9 3360790
Step 3 - If a VM was in the process of being backed up, there is an additional process for the actual vmkfstools copy. You will need to identify the process for that and kill that as well. We will again use ps -c command and search for any vmkfstools that are running:
# ps -c | grep vmkfstools | grep -v grep
3360796 3360796 vmkfstools /sbin/vmkfstools -i /vmfs/volumes/himalaya-temporary/VC-Windows/VC-Windows.vmdk -a lsilogic -d thin /vmfs/volumes/test-dont-use-this-volume/backups/VC-Windows/VC-Windows-2013-01-26_16-45-35/VC-Windows.vmdk
Step 4 - In case there is someone manually running a vmkfstools, make sure you take a look at the command itself and that it maps back to the current VM that was being backed up before kill the process. Once you have identified the proper PID, go ahead and use the kill command:
# kill -9 3360796
Step 5 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Please take a moment to read over what is a cronjob and how to set one up, before continuing
The task of configuring cronjobs on classic ESX servers (with Service Console) is no different than traditional cronjobs on *nix operating systems (this procedure is outlined in the link above). With ESXi on the other hand, additional factors need to be taken into account when setting up cronjobs in the limited shell console called Busybox because changes made do not persist through a system reboot. The following document will outline steps to ensure that cronjob configurations are saved and present upon a reboot.
Important Note: Always redirect the ghettoVCB output to /dev/null and/or to a log when automating via cron, this becomes very important as one user has identified a limited amount of buffer capacity in which once filled, may cause ghettoVCB to stop in the middle of a backup. This primarily only affects users on ESXi, but it is good practice to always redirect the output. Also ensure you are specifying the FULL PATH when referencing the ghettoVCB script, input or log files.
e.g.
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /dev/null
or
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /tmp/ghettoVCB.log
Task: Configure ghettoVCB.sh to execute a backup five days a week (M-F) at 12AM (midnight) everyday and send output to a unique log file
Configure on ESX:
1. As root, you'll install your cronjob by issuing:
[root@himalaya ~]# crontab -e
2. Append the following entry:
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
3. Save and exit
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -e
no crontab for root - using an empty one
crontab: installing new crontab
4. List out and verify the cronjob that was just created:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -l
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
You're ready to go!
Configure on ESXi:
1. Setup the cronjob by appending the following line to /var/spool/cron/crontabs/root:
0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-$(date +\%s).log
If you are unable to edit/modify /var/spool/cron/crontabs/root, please make a copy and then edit the copy with the changes
cp /var/spool/cron/crontabs/root /var/spool/cron/crontabs/root.backup
Once your changes have been made, then "mv" the backup to the original file. This may occur on ESXi 4.x or 5.x hosts
mv /var/spool/cron/crontabs/root.backup /var/spool/cron/crontabs/root
You can now verify the crontab entry has been updated by using "cat" utility.
2. Kill the current crond (cron daemon) and then restart the crond for the changes to take affect:
On ESXi < 3.5u3
kill $(ps | grep crond | cut -f 1 -d ' ')
On ESXi 3.5u3+
~ # kill $(pidof crond)
~ # crond
On ESXi 4.x/5.0
~ # kill $(cat /var/run/crond.pid)
~ # busybox crond
On ESXi 5.1 to 6.x
~ # kill $(cat /var/run/crond.pid)
~ # crond
On ESXi 7.x
~ # kill $(cat /var/run/crond.pid)
~ # /usr/lib/vmware/busybox/bin/busybox crond
3. Now that the cronjob is ready to go, you need to ensure that this cronjob will persist through a reboot. You'll need to add the following two lines to /etc/rc.local (ensure that the cron entry matches what was defined above). In ESXi 5.1, you will need to edit /etc/rc.local.d/local.sh instead of /etc/rc.local as that is no longer valid.
On ESXi 3.5
/bin/kill $(pidof crond)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 4.x/5.0
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
On ESXi 5.1 to 6.x
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 7.x
/bin/kill $(cat /var/run/crond.pid) > /dev/null 2>&1
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/usr/lib/vmware/busybox/bin/busybox crond
Afterwards the file should look like the following:
~ # cat /etc/rc.local
#! /bin/ash
export PATH=/sbin:/bin
log() {
echo "$1"
logger init "$1"
}
#execute all service retgistered in /etc/rc.local.d
if [http:// -d /etc/rc.local.d |http:// -d /etc/rc.local.d ]; then
for filename in `find /etc/rc.local.d/ | sort`
do
if [ -f $filename ] && [ -x $filename ]; then
log "running $filename"
$filename
fi
done
fi
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
This will ensure that the cronjob is re-created upon a reboot of the system through a startup script
2. To ensure that this is saved in the ESXi configuration, we need to manually initiate an ESXi backup by running:
~ # /sbin/auto-backup.sh
config implicitly loaded
local.tgz
etc/vmware/vmkiscsid/vmkiscsid.db
etc/dropbear/dropbear_dss_host_key
etc/dropbear/dropbear_rsa_host_key
etc/opt/vmware/vpxa/vpxa.cfg
etc/opt/vmware/vpxa/dasConfig.xml
etc/sysconfig/network
etc/vmware/hostd/authorization.xml
etc/vmware/hostd/hostsvc.xml
etc/vmware/hostd/pools.xml
etc/vmware/hostd/vmAutoStart.xml
etc/vmware/hostd/vmInventory.xml
etc/vmware/hostd/proxy.xml
etc/vmware/ssl/rui.crt
etc/vmware/ssl/rui.key
etc/vmware/vmkiscsid/initiatorname.iscsi
etc/vmware/vmkiscsid/iscsid.conf
etc/vmware/vmware.lic
etc/vmware/config
etc/vmware/dvsdata.db
etc/vmware/esx.conf
etc/vmware/license.cfg
etc/vmware/locker.conf
etc/vmware/snmp.xml
etc/group
etc/hosts
etc/inetd.conf
etc/rc.local
etc/chkconfig.db
etc/ntp.conf
etc/passwd
etc/random-seed
etc/resolv.conf
etc/shadow
etc/sfcb/repository/root/interop/cim_indicationfilter.idx
etc/sfcb/repository/root/interop/cim_indicationhandlercimxml.idx
etc/sfcb/repository/root/interop/cim_listenerdestinationcimxml.idx
etc/sfcb/repository/root/interop/cim_indicationsubscription.idx
Binary files /etc/vmware/dvsdata.db and /tmp/auto-backup.31345.dir/etc/vmware/dvsdata.db differ
config implicitly loaded
Saving current state in /bootbank
Clock updated.
Time: 20:40:36 Date: 08/14/2009 UTC
Now you're really done!
If you're still having trouble getting the cronjob to work, ensure that you've specified the correct parameters and there aren’t any typos in any part of the syntax.
Ensure crond (cron daemon) is running:
ESX 3.x/4.0:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# ps -ef | grep crond | grep -v grep
root 2625 1 0 Aug13 ? 00:00:00 crond
ESXi 3.x/4.x/5.x:
~ # ps | grep crond | grep -v grep
5196 5196 busybox crond
Ensure that the date/time on your ESX(i) host is setup correctly:
ESX(i):
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# date
Fri Aug 14 23:44:47 PDT 2009
Note: Careful attention must be noted if more than one backup is performed per day. Backup windows should be staggered to avoid contention or saturation of resources during these periods.
0Q: I'm getting error X when using the script or I'm not getting any errors, the backup didn’t even take place. What can I do?
0A: First off, before posting a comment/question, please thoroughly read through the ENTIRE documentation including the FAQs to see if your question has already been ansered.
1Q: I've read through the entire documentation + FAQs and still have not found my answer to the problem I'm seeing. What can I do?
1A: Please join the ghettoVCB Group to post your question/comment.
2Q: I've sent you private message or email but I haven't received a response? What gives?
2A: I do not accept issues/bugs reported via PM or email, I will reply back, directing you to post on the appropriate VMTN forum (that's what it's for). If the data/results you're providing is truely senstive to your environment I will hear you out, but 99.99% it is not, so please do not messsage/email me directly. I do monitor all forums that contain my script including the normal VMTN forums and will try to get back to your question as soon as I can and as time permits. Please do be patient as you're not the only person using the script (600,000+ views), thank you.
3Q: Can I schedule backups to take place hourly, daily, monthly, yearly?
3A: Yes, do a search online for crontab.
4Q: I would like to setup cronjob for ESX(i) 3.5 or 4.0?
4A: Take a look at the Cronjob FAQ section in this document.
5Q: I want to schedule my backup on Windows, how do I do this?
5A: Do a search for plink. Make sure you have paired SSH keys setup between your Windows system and ESX/ESXi host.
6Q: I only have a single ESXi host. I want to take backups and store them somewhere else. The problem is: I don't have NFS, iSCSI nor FC SAN. What can I do?
6A: You can use local storage to store your backups assuming that you have enough space on the destination datastore. Afterwards, you can use scp (WinSCP/FastSCP) to transfer the backups from the ESXi host to your local desktop.
7Q: I’m pissed; the backup is taking too long. My datastore is of type X?
7A: YMMV, take a look at your storage configuration and make sure it is optimized.
8Q: I noticed that the backup rotation is occurring after a backup. I don't have enough local storage space, can the process be changed?
8A: This is primarily done to ensure that you have at least one good backup in case the new backup fails. If you would like to modify the script, you're more than welcome to do so.
9Q: What is the best storage configuration for datastore type X?
9A: Search the VMTN forums; there are various configurations for the different type of storage/etc.
10Q: I want to setup an NFS server to run my backups. Which is the best and should it be virtual or physical?
10A: Please refer to answer 7A. From experience, we’ve seen physical instances of NFS servers to be faster than their virtual counterparts. As always, YMMV.
11Q: I have VMs that have snapshots. I want to back these things up but the script doesn’t let me do it. How do I fix that?
11A: VM snapshots are not meant to be kept for long durations. When backing up a VM that contains a snapshot, you should ensure all snapshots have been committed prior to running a backup. No exceptions will be made…ever.
12Q: I would like to restore from backup, what is the best method?
12A: The restore process will be unique for each environment and should be determined by your backup/recovery plans. At a high level you have the option of mounting the backup datastore and registering the VM in question or copy the VM from the backup datastore to the ESX/ESXi host. The latter is recommended so that you're not running a VM living on the backup datastore or inadvertently modifying your backup VM(s). You can also take a look at ghettoVCB-restore which is experimentally supported.
13Q: When I try to run the script I get: "-bash: ./ghettoVCB.sh: Permission denied", what is wrong?
13A: You need to change the permission on the script to be executable, chmod +x ghettoVCB.sh
14Q: Where can I download the latest version of the script?
14A: The latest version is available on on github - https://github.com/lamw/ghettoVCB/downloads
15Q: I would like to suggest/recommend feature X, can I get it? When can I get it? Why isn't it here, what gives?
15A: The general purpose of this script is to provide a backup solution around VMware VMs. Any additional features outside of that process will be taken into consideration depending on the amount of time, number of requests and actual usefulness as a whole to the community rather than to an individual.
16Q: I have found this script to be very useful and would like to contribute back, what can I do?
16A: To continue to develop and share new scripts and resources with the community, we need your support. You can donate here Thank You!
17Q: What are the different type of backup uses cases that are supported with ghettoVCB?
17A: 1) Live backup of VM with the use of a snapshot and 2) Offline backup of a VM without a snapshot. These are the only two use cases supported by the script.
18Q: When I execute the script on ESX(i) I get some funky errors such as ": not found.sh" or "command not found". What is this?
18A: Most likely you have some ^M characters within the script which may have come from either editing the script using Windows editor, uploading the script using the datastore browser OR using wget. The best option is to either using WinSCP on Windows to upload the script and edit using vi editor on ESX(i) host OR Linux/UNIX scp to copy the script into the host. If you still continue to have the issue, do a search online on various methods of removing this Windows return carriage from the script
19Q: My backup works fine OR it works for a single backup but I get an error message "Input/output error" or "-ash: YYYY-MM-DD: not found" during the snapshot removal process. What is this?
19A: The issue has been recently identified by few users as a problem with user's NFS server in which it reports an error when deleting large files that take longer than 10seconds. VMware has recently released a KB article http://kb.vmware.com/kb/1035332 explaining the details and starting with vSphere 4.1 Update 2 or vSphere 5.0, a new advanced ESX(i) parameter has been introduced to increase the timeout. This has resolved the problem for several users and maybe something to consider if you are running into this issue, specifically with NFS based backups.
20Q: Will this script function with vCenter and DRS enabled?
20Q: No, if the ESX(i) hosts are in a DRS enabled cluster, VMs that are to be backed up could potentially be backed up twice or never get backed up. The script is executed on a per host basis and one would need to come up a way of tracking backups on all hosts and perhaps write out to external file to ensure that all VMs are backed up. The main use case for this script are for standalone ESX(i) host
21Q: I'm trying to use WinSCP to manually copy VM files but it's very slow or never completes on huge files, why is that?
21A: WinSCP was not designed for copying VM files out of your ESX(i) host, take a look at Veeam's FastSCP which is designed for moving VM files and is a free utility.
22Q: Can I use setup NFS Server using Windows Services for UNIX (WSFU) and will it work?
22A: I've only heard a handful of users that have successfully implemented WSFU and got it working, YMMV. VMware also has a KB article decribing the setup process here: http://kb.vmware.com/kb/1004490 for those that are interested. Here is a thread on a user's experience between Windows Vs. Linux NFS that maybe helpful.
23Q: How do VMware Snapshots work?
23A: http://kb.vmware.com/kb/1015180
24Q: What files make up a Virtual Machine?
24A: http://virtualisedreality.wordpress.com/2009/09/16/quick-reminder-of-what-files-make-up-a-virtual-ma...
25Q: I'm having some issues restoring a compressed VM backup?
25A: There is a limitation in the size of the VM for compression under ESXi 3.x & 4.x, this limitation is in the unsupported Busybox console and should not affect classic ESX 3.x/4.x. On ESXi 3.x, the maximum largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
26Q: I'm backing up my VM as "thin" format but I'm still not noticing any size reduction in the backup? What gives?
2bA: Please refer to this blog post which explains what's going on: http://www.yellow-bricks.com/2009/07/31/storage-vmotion-and-moving-to-a-thin-provisioned-disk/
27Q: I've enabled VM_SNAPSHOT_MEMORY and when I restore my VM it's still offline, I thought this would keep it's memory state?
27A: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relavent to the actual snapshot itself and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
28Q: Can I rename the directories and the VMs after a VM has been backed up?
28A: The answer yes, you can ... but you may run into all sorts of issues which may break the backup process. The script expects a certain layout and specific naming scheme for it to maintain the proper rotation count. If you need to move or rename a VM, please take it out of the directory and place it in another location
29Q: Can ghettoVCB support CBT (Change Block Tracking)?
29A: No, that is a functionality of the vSphere API + VDDK API (vSphere Disk Development Kit). You will need to look at paid solutions such as VMware vDR, Veeam Backup & Recovery, PHD Virtual Backups, etc. to leverage that functionailty.
30Q: Does ghettoVCB support rsync backups?
30A: Currently ghettoVCB does not support rsync backups, you either obtain or compile your own static rsync binary and run on ESXi, but this is an unsupported configuration. You may take a look at this blog post for some details.
31Q: How can I contribute back?
31A: You can provide feedback/comments on the ghettoVCB Group. If you have found this script to be useful and would like to contribute back, please click here to donate.
32Q: How can select individual VMDKs to backup from a VM?
32A: Ideally you would use the "-c" option which requires you to create individual VM configuration file, this is where you would select specific VMDKs to backup. Note, that if you do not need to define all properties, anything not defined will adhere from the default global properties whether you're editing the ghettoVCB.sh script or using ghettoVCB global configuration file. It is not recommended that you edit the ghettoVCB.sh script and modify the VMDK_FILES_TO_BACKUP variable, but if you would like to keep everything in one script, you may add the extensive list of VMDKs to backup but do know this can get error prone as script may be edited frequently and lose some flexibility to support multiple environments.
33Q: Why is email not working when I'm using ESXi 5.x but it worked in ESXi 4.x?
33A: ESXi 5.x has implemented a new firewall which requires the email port that is being used to be opened. Please refer to the following articles on creating a custom firewall rule for email:
http://www.virtuallyghetto.com/2012/09/creating-custom-vibs-for-esxi-50-51.html
How to Create Custom Firewall Rules in ESXi 50
How to Persist Configuration Changes in ESXi 4.x/5.x Part 1
How to Persist Configuration Changes in ESXi 4.x/5.x Part 2
34Q: How do I stop the ghettoVCB process?
34A: Take a look at the Stopping ghettoVCB Process section of the documentation for more details.
Many have asked what is the best configuration and recommendation for setting up a cheap NFS Server to run backups for VMs. This has been a question we've tried to stay away from just because the possiblities and solutions are endless. One can go with physical vs. virtual, use VSA (Virtual Storage Appliances) such as OpenFiler or Lefthand Networks, Windows vs. Linux/UNIX. We've not personally tested and verify all these solutions and it all comes down to "it depends" type of answer. Though from our experience, we've had much better success with a physical server than a virtual.
It is also well known that some users are experiencing backup issues when running specifically against NFS, primarily around the rotation and purging of previous backups. The theory from what we can tell by talking to various users is that when the rotation is occuring, the request to delete the file(s) may take awhile and does not return within a certain time frame and causes the script to error out with unexpected messages. Though the backups were successful, it will cause unexpected results with directory structures on the NFS target. We've not been able to isolate why this is occuring and maybe due to NFS configuration/exports or hardware or connection not being able to support this process.
We'll continue to help where we can in diagonising this issus but we wanted to share our current NFS configuration, perhaps it may help some users who are new or trying to setup their system. ( Disclaimer: These configurations are not recommendations nor endorsement for any of the components being used)
UPDATE: Please also read FAQ #19 for details + resolution
Server Type: Physical
Model: HP DL320 G2
OS: Arch linux 2.6.28
Disks: 2 x 1.5TB
RAID: Software RAID1
Source Host Backups: ESX 3.5u4 and ESX 4.0u1 (We don't run any ESXi hosts)
uname -a output
Linux XXXXX.XXXXX.ucsb.edu 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686 Intel(R) Pentium(R) 4 CPU 3.06GHz GenuineIntel GNU/Linux
NICs:
00:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
00:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
NFS Export Options:
/exports/vm-backups XXX.XXX.XXX.XXX/24(rw,async,all_squash,anonuid=99,anongid=99)
*One important thing to check is to verify that your NFS exportion options are setup correctly, "async" should be configured to ensure that all IO requests are processed and reply back to the client before waiting for the data to be written to the storage.
*Recently VMware released a KB article describing the various "Advanced NFS Options" and their meanings and recommendations: http://kb.vmware.com/kb/1007909 We've not personally had to touch any of these, but for other vendors such as EMC and NetApp, there are some best practices around configuring some of these values depending on the number of NFS volumes or number of ESX(i) host connecting to a volume. You may want to take a look to see if any of these options may help with NFS issue that some are seeing
*Users should also try to look at their ESX(i) host logs during the time interval when they're noticing these issues and see if they can find any correlation along with monitoring the performance on their NFS Server.
*Lastly, there are probably other things that can be done to improve NFS performance or further optimization, a simple search online will also yield many resources.
Windows utility to email ghettoVCB Backup Logs - http://www.waldrondigital.com/2010/05/11/ghettovcb-e-mail-rotate-logs-batch-file-for-vmware/
Windows front-end utility to ghettoVCB - http://www.magikmon.com/mkbackup/ghettovcb.en.html
Note: Neither of these tools are supported, for questions or comments regarding these utilities please refer to the author's pages.
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
Enhancements:
Fixes:
Big thanks to Alain Spineux and his contributions to the ghettoVCB script and helping with debugging and testing.
Enhancements:
Fixes:
Enhancements:
Enhancements:
Enhancements:
Fixes:
Fixes:
Enhancements:
Fixes:
Fixes:
Big thanks goes out to the community for the suggested features and to those that submitted snippet of their modifications.
Updated FAQ #20-24 for common issues/questions. Also included a new section about our "personal" NFS configuration and setup.
Fix the crontab section to reflect the correct syntax + updated FAQ #17,#18 and #19 for common issues.
The following enhancements and fixes have been implemented in this release of ghettoVCB. Special thanks goes out to all the ghettoVCB BETA testers for providing time and their environments to test features/fixes of the new script!
Enhancements:
Fixes:
Yes, you can do that and it would work perfectly fine. I personally don't recommend that, unless it's a last resort, since you're basically using your backups as 'live' systems. If you can, restore the backups to a new volume and then register those VMs, that way you still have pristine copies of your backups.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
>22.09.2009 05:59 Antwort chayawatv sagt:
>I try to use this scipt to do backup with compression enabled.
>Howerver, I cannot uncompress "filename".gz as it show "tar: Invalid tar magic".
>Currently, I use ESX 3.5i U4 free edition and backup it to local drive of ESX server itself.
>Any thought about the issue?
>Thank you
busybox v1.2.1 has a bug and this is the whole problem. so ghettovcb on esx3i with compression=on is BROKEN !!!
( http://communities.vmware.com/message/1122064 / https://bugs.maemo.org/show_bug.cgi?id=3033 )
solution:
add busybox from esx4i to esx3i box and change ghettovcb appropriately to use that one for tar and gzip.
alternative: don`t use compression
i wonder that this thread has more than 700 comments but this is found that late - nobody using compression or test restore of their (probably corrupted) backups ?
Hi lamw,
I have problem with backup of vmdk stored across multiple datastores when I use individual configuration.
My virtual machine akord-pro have this files:
- akord-pro.vmx on datastore raid1 (main configuration)
- akord-pro.vmdk on datastore raid1
- akord-pro_1.vmdk on datastore raid1
- akord-pro_2.vmdk on datastore raid5
- akord-pro_3.vmdk on datastore next1
- akord-pro_4.vmdk on datastore next1
I need backup only first three vmdk, i.e.: akord-pro, akord-pro_1 and akord-pro_2
However script backup only vmdks from datastore raid1, no vmdk from next datastore (akord-pro_2)
I think that it is because of script searches akord-pro_2.vmdk including full path but in configuration file is akord-pro_2.vmdk defined without full path.
Am I right?
Output from running ghettoVCB script:
...
2010-02-07 12:06:14 -- debug: HOST BUILD: VMware ESX 4.0.0 build-208167
2010-02-07 12:06:14 -- debug: HOSTNAME: vma.domain.cz
2010-02-07 12:06:15 -- info: CONFIG - USING CONFIGURATION FILE = ./akord-pro
2010-02-07 12:06:15 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/nfs172v1/_backup
2010-02-07 12:06:15 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2010-02-07 12:06:15 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2010-02-07 12:06:15 -- info: CONFIG - ADAPTER_FORMAT = lsilogic
2010-02-07 12:06:15 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2010-02-07 12:06:15 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2010-02-07 12:06:15 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2010-02-07 12:06:15 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2010-02-07 12:06:15 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2010-02-07 12:06:15 -- info: CONFIG - LOG_LEVEL = debug
2010-02-07 12:06:15 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout
2010-02-07 12:06:15 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2010-02-07 12:06:15 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2010-02-07 12:06:15 -- info: CONFIG - VMDK_FILES_TO_BACKUP = akord-pro.vmdk,akord-pro_1.vmdk,akord-pro_2.vmdk
2010-02-07 12:06:16 -- info: Initiate backup for akord-pro
2010-02-07 12:06:16 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-02-07" for akord-pro
2010-02-07 12:06:16 -- debug: Waiting for snapshot "ghettoVCB-snapshot-2010-02-07" to be created
2010-02-07 12:06:16 -- debug: Snapshot timeout set to: 900 seconds
2010-02-07 12:06:17 -- debug: Waiting for snapshot creation to be completed - Iteration: 0 - sleeping for 60secs (Duration: 0 seconds)
2010-02-07 12:07:18 -- debug: findVMDK() - Searching for VMDK: "/vmfs/volumes/4a574526-5eb4fd94-375a-001517b9527d/akord-pro/akord-pro_3.vmdk" to backup
2010-02-07 12:07:18 -- debug: findVMDK() - Searching for VMDK: "/vmfs/volumes/4a574526-5eb4fd94-375a-001517b9527d/akord-pro/akord-pro_4.vmdk" to backup
2010-02-07 12:07:18 -- debug: findVMDK() - Searching for VMDK: "/vmfs/volumes/4a2fa88f-cc11effe-5c89-001517b9527d/akord-pro/akord-pro_2.vmdk" to backup
2010-02-07 12:07:18 -- debug: findVMDK() - Searching for VMDK: "akord-pro_1.vmdk" to backup
2010-02-07 12:07:18 -- debug: findVMDK() - Found VMDK! - "akord-pro_1.vmdk" to backup
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/raid1/akord-pro/akord-pro_1.vmdk'...
Clone: 100% done.
2010-02-07 12:27:03 -- debug: findVMDK() - Searching for VMDK: "akord-pro.vmdk" to backup
2010-02-07 12:27:03 -- debug: findVMDK() - Found VMDK! - "akord-pro.vmdk" to backup
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/raid1/akord-pro/akord-pro.vmdk'...
Clone: 100% done.
2010-02-07 12:35:53 -- info: Removing snapshot from akord-pro ...
2010-02-07 12:36:05 -- info: Backup Duration: 29.82 Minutes
2010-02-07 12:36:05 -- info: Successfully completed backup for akord-pro!
...
Thank you for reaction or tip how to do that right.
Hi,
Your assumptions are correct, the way the script figures out whether a VMDK is stored locally with the .vmx configuration file OR if it's hosted on another datastore is by looking at the path defined in the .vmx file. By default, if it's a relative path aka "myvmdk.vmdk", it means the VMDK is being stored locally in the datastore along with the .vmx configuration file. If it has an absolute path, then the VMDK is being stored in another datastore other than the default. You may want to double check that in fact your VM has all VMDKs currently mounted and that the .vmx file reflects these changes appropriately, in case you manually edited the file.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Urgent question! I just noticed that on virtual machines that have more than one disk the following happens:
The script correctly backs all the vmdks up. When I register the machine directly from the backup folder the first disk is correctly on the backup device, but the second disk is being pointed to the original datastore and not the new location...
So as an example. I have a machine called fdn003. After the backup, I go to the folder fdn003-2010-02-17--1. In that folder I see the vmx file, the first vmdk file. I then see a directory composed of characters, these characters seem to spell out the code for the datastore when I run a vdf command. Why is it doing this, shouldnt all the disks be in one directory and the vmx updated? Please help.
soleblazer,
Ah, yes for the case of VMs with VMDKs that were dispersed across multiple datastores, due to the way VMware defaults the name, the only way to keep track of these was to create a directory structure that maps the original datastore UUID, that is the characters you're referring to. To accommodate this if you want to register and run the VM from the backup datastore, you just need to go into the VM's settings and basically locate the disks and re-point them to backup datastore since the .vmx file will contain the original configurations.
If you use the restore script, this should be handled for you automatically, by default the recommendation is to restore the backup to a different datastore and the script will handle the registration of the disks.
Hopefully this makes sense
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
William,
That makes sense. So on the vm's that have multiple drives I would need to do this:
Add the vm to the inventory
Remove the disk that is pointing to the original datastore
Add a new disk using the path that your script uses
Is that it?
That is correct, just do a 'remove' which is just a pointer but don't delete from disk, especially if you have the VM still running else it potentially can delete the actual disks from under the VM.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Thanks alot. I tested it out and it works fine. I am doing san maintenance this weekend and I'm simply trying to be able to survive if the SAN should somehow get erased. I really appreciate your help and script!
I tried removing them. If i run manually the script from shell, then it works fine, but when it is started from cron with the same arguments, configs, everything, then only one backup left / vm, and it is the second after 2 running. I havent modified the script and the parameters are the same, this is the only difference. Any idea?
In the logs it looks like everything is ok, there isnt any extra info compared to other logs which are from manual runnings.
Thank you!
Considering your remarks on encryption and (unnecessary) load, I tried to figure out an alternative approach, but I didn't work out completely, yet.
On the remote box (IP replaced by 1.2.3.4) I exported
/home/export/eq6/gotthard 1.2.3.4(rw,async,all_squash,sync,insecure)
with "insecure" required on Debian Lenny. The ports of rpc.statd, lockd and rpc.mountd are statically bound to 2231, 2232 and 2233. "rpcinfo -p" confirms their ports and "exportfs -a" confirms the existance of the exported directory.
On the ESXi I establish tunneling of two ports:
dbclient -i .ssh/key_for_nfs -L 2049:1.2.3.4:2049 sleeper@1.2.3.4 sleep 10m
dbclient -i .ssh/key_for_nfs -L 2233:1.2.3.4:2233 sleeper@1.2.3.4 sleep 10m
My assumption was, that I should be able to mount the nfs-directory by means of vSphere Client now. Nonetheless, any attempt to do this (host: 127.0.0.1 or external IP of ESXi, directory: /home/export/eq6/gotthard) is in vain. After refreshing the list, the gui tells me, that the NFS server can't be found. Unfortunately, all documentation on the way of ESXi's nfs-mapping doesn't tell something on the required ports. Has anybody an idea?
Take a look at the vmkernel logs on why it's failing to mount the NFS server. You can also use vmkping to ensure you can ping your NFS server. The requirements for ESXi to mount an NFS datastore is pretty trivial, so long as you have a valid VMkernel interface that communicate to your NFS server, you should be able to mount it, assuming permissions on the NFS server is correct.
Can you mount this volume using another hosts that's not ESXi?
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Yes, mounting the NFS datastore directly from ESXi (without any tunnel) works fine.
The logfiles (ESXi's IP replaced by 5.6.7.8) contain the following lines:
Feb 22 19:19:18 vmkernel: 83:01:05:03.352 cpu5:9855)WARNING: NFS: 898: RPC error 13 (RPC was aborted due to timeout) trying to get port for Mount Program (100005) Version (3) Protocol (TCP) on Server (5.6.7.8)
Feb 22 19:19:18 Hostd: VmkCtl mount or ProcessNas failed: NFS Error: Unable to Mount filesystem: Unable to connect to NFS server
Feb 22 19:19:18 Hostd: AdapterServer caught exception: vim.fault.PlatformConfigFault
Feb 22 19:19:18 Hostd: Task Completed : haTask-ha-host-vim.host.DatastoreSystem.createNasDatastore-11884 Status error
Feb 22 19:19:18 Hostd: Activation : Invoke done on
Feb 22 19:19:18 Hostd: Arg spec:
Feb 22 19:19:18 Hostd: (vim.host.NasVolume.Specification) { dynamicType = , }
Feb 22 19:19:18 Hostd:
Feb 22 19:19:18 Hostd: Throw vim.fault.PlatformConfigFault
Feb 22 19:19:18 Hostd: Result:
Feb 22 19:19:18 Hostd: (vim.fault.PlatformConfigFault) { dynamicType = , faultCause = (vmodl.MethodFault) null, text = "NFS Error: Unable to Mount filesystem: Unable to connect to NFS server", msg = "", }
Right now, I haven't found any clue on "RPC error 13 (RPC was aborted due to timeout) trying to get port for Mount Program (100005) Version (3) Protocol (TCP) on Server (5.6.7.8)"
Yea, the tunnel probably is doing something odd to the way ESXi tries to mount up the NFS datastore using it's defaults. Remember, this is a very limited environment, you may or may not be able to get this working. You could try having a poke around /etc/services and perhaps tweak some entries on which ports NFS can be mounted on. Try at your own risk and definitely on a test system.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
It works: Beside ports 2049 (nfs) and 2233 (mountd) also portmapper's 111 has to be tunneled to the ESXi. On the ESXi the host 127.0.0.1 has to be used, while on the machine offering nfs-services its external IP is required (as written above).
And now let's integrate the stuff into your script
I’m experiencing some strange behavior running the script from cron on an ESXi4 U1 server backing up to an NFS store (CentOS 4.8).
I’m starting the script from another script file that I have scheduled in crontab.
This extra script does nothing special; it just starts the ghetto script and creates a new file at the end. This new file I use to trigger an email message from the CentOS NFS server.
Last night’s run stopped after two VM’s were backuped. On the second VM there was still a “Consolidate Helper” snapshot active. This snapshot was not shown trough the vSphere client. To remove the residual snapshot I had to create a new snapshot and after that I could delete all snapshots again. At this point the script continued its work backing up the next VM’s. After a while I got an email with the log file but looking at the log file the script had not jet finished. The last line on the backup log was Clone: 71% done.
But somehow the script had finished because the email trigger file got created.
A few minutes later I got another email message with another part of the backup log.
So the script finished again! Looks like some how two instances of the script were running at the same time. But how can that be and how would that be possible? Checking with “ps aux | grep crond” I see only on cron deamon running. And earlier manual runs of the script finished just fine.
I’ll will restart the server today and see how things workout tonight.
Interesting, well if you get it all working, I wouldn't mind posting a set of instructions for your configuration for others that may be interested.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I would double check your kickoff script or your cron entry, the script will always have 1 instance running unless another is kicked off. You can probably easily view this by looking in your cron logs under /var/log/cron and see when ghettoVCB was kicked off and see if you some how got another instance running.
I'm considering in a future release of the script to output a lock file, but I'm still thinking about that, since there may be users wanting to have more than once instance running.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Another night another failure, this time if failed on the first VM and again on the second. (didn't get to restart the sever)
My kick off script is no more then two line. Not much can go worng there. I ran it tree times yesterday without any problems.
/vmfs/volumes/NLJRSR63/vcb/srv32/ghettoVCB.sh -f /vmfs/volumes/NLJRSR63/vcb/srv32/vmserver.list -l /vmfs/volumes/NLJRSR63/vcb/srv32/backup.log
touch /vmfs/volumes/NLJRSR63/vcb/srv32/backupdone
My crontab entry,
00 23 * * 0-6 /vmfs/volumes/NLJRSR63/vcb/srv32/backup.sh
btw. I don't see any cron logs under /var/log
also strange: I know the script is running but cant find it with ps.
Can you manually run the backup without using the cron job? Are you able to successfully and repeatably backup VMs through a manual execution? If you do run a manual or automated, can you also enable logging to debug level and save the output file to : http://pastebin.com/ and just reply back with the link. Without any logs, I can't tell exactly what's happening if the backups are even attempted or if there is something that's causing these VMs to not backup.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi everybody,
My needed : I would like to backup all the vms one time by week.
Just one question about this script please. I've modified it and excute on my esxi 4.0 host. It working fine but it has just backup the vmx file (which is the configuration file). It's not complete for me to restaure. I have thinked that we can backup all the global vm file. It's possible please, may be to change some setting in the script but I have not found.
thanks for your reply,
/Frédéric
For setting up backup schedule, please take a look at the Cron FAQ section.
The script by default will backup your VM configuration file (.vmx) and all relevant and valid VMDKs (*.vmdk and *-flat.vmdk). If it's only backing up the .vmx file, then there is something wrong and you need to take a look at the logs to see what might be going on. I would also recommend enabling debug mode to get more verbosity in the logs, please take a look at FAQ #1 for any issues with the script.
Thanks
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Manually the backup runs fine.
But running fron cron it look like snapshot won't be removed.
Today it failed again. I manually removed the snapshot and the script continued.
But it's now haning again on the second VM.
(I also noticed that the backup files of the first VM were stored under a previous backup folder. Is this done by design when there are more that one backups in a day?)
Hi!
The solution was that I turned on loggin with "-l". So instead of running like this:
0 0 * * 1-5 ghettoVCB.sh -f backuplist -c config > ghettoVCB-backup-$(date +\%s).log
i did this:
0 0 * * 1-5 ghettoVCB.sh -f backuplist -c config -l ghettoVCB-backup-$(date +\%s).log > /dev/null 2>&1
Thanks for the tip. That seems to help a lot. I've just completed a backup run from cron without a problem.
I feel almost lame staking this claim, but the attached and presumably authoritative version of ghettoVCB.sh apparently has DOS line-endings. No matter where and with what http client I download. E.g. using GNU wget 1.10.2 on a Linux box:
% wget http://communities.vmware.com/servlet/JiveServlet/download/8760-49-32036/ghettoVCB.sh --16:49:02-- http://communities.vmware.com/servlet/JiveServlet/download/8760-49-32036/ghettoVCB.sh => `ghettoVCB.sh' Resolving communities.vmware.com... 195.18.221.160, 195.18.221.178 Connecting to communities.vmware.com|195.18.221.160|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 29 511 (29K) [application/x-sh] 100%[========================================================>] 29 511 102.40K/s 16:49:03 (102.18 KB/s) - `ghettoVCB.sh' saved [29511/29511] % file ghettoVCB.sh ghettoVCB.sh: ASCII English text, with CRLF line terminators
Should the attached file be "unix text"?
I guess it should be "unix text"
I tried downloading with firefox and opening it with Notepad++ and it says it's ANSI with Windows line endings.
You could convert it with that text editor or in linux with the "flip" tool (apt-get install flip if debian/ubuntu)
sed 's/.$//g' input > output
run this, and it will remove ^M from end of line so it will work.
There's nothing wrong with the script per-se, but there is an issue when using wget and downloading from VMTN. Take a look at FAQ #17
Basically either deal with removing the ^M characters using solutions OR use scp or WinSCP to transfer the script.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Is this on NFS datastore or local VMFS volume?
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
From local to NFS.
Yea, I'm betting you're seeing the same NFS issue that others are seeing as well. If you just take a look at the last 20 or so threads, you'll see some of my replies. For more details, or as much as I've been able to gather take a look at FAQ #18 and "Our NFS Configuration" in the document.
Unfortunately, at this point in time, we've not been able to identify what commonalities between all the NFS servers being used that is causing a small portion of users to have this 'connection' problem during the removal process of a large files. There is nothing wrong with the script, but it has something to do with either the NFS server or ESXi host configurations/etc.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Adding > /dev/null 2>&1 to the cron job seems for have fixed the problem. Thanks again lacikaaa.
William, thanks for the reply. (And also thanks to others, I know how to convert "DOS format" to Unix.)
I said "no matter where and with what http client" - I tried multiple browsers (IE, FF, Opera) on a couple of OSs and the result is the same no matter: I get a file with DOS line endings, and whether I scp or WinSCP to the ESX box I still have a file with DOS line endings. No http client should affect this. Therefore I can't think see any other explanation than that the file on the server has DOS line endings. Please enlighten me if I'm wrong.
Not sure why it's not working for you. I can right click on the script from this VMTN document, save as and then use WinSCP to copy it to ESXi host and ensure it has executable permission and execute a backup. If this was an issue with the source of the script, there would be many many more users with this problem.
Again, if you continue to run into this problem, you can easily strip out the ^M characters and there's been a few different solutions on accomplishing this from using sed or replace in vi.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I'm having the same issue with the ^M - regardless which client or OS. But I've to test it at home without using Squid Proxy (here at work) - maybe he's adding the ^M
Odd ... again, I've done this in many many locations and never once had an issue.
If you guys like, I can do screenshot of my exact steps and show you that it does in fact work and that no "hidden" ^M characters are embedded with the version that's hosted by VMTN documents.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I don't have any issues ether. Remember you can't do ANY editing of the script in Windows. You must do the editing on the vMA appliance or on the ESXi host.
Wont mind a few screen shots.
Will maybe show me what i am doing wrong.
No need to go to such extremes as to document your steps in detail, William. At this point this is just puzzling and funny. To convert forth and back is no problem for me, and if this issue doesn't affect (m)any others, it doesn't matter. Though it seems like some people can reproduce it, voluntarily or not.
I have tried so many browsers, and so many platforms and locations, passing through proxies or not passing through proxies. The result is consistently the same: I can e.g. right-click the attachment above in IE and save. The file size is always 29511 bytes, and if I immediately inspect it with a hex viewer, without transfering it anywhere, line breaks are 0d 0a ("DOS format"). No matter what OS, client/browser, proxy/no proxy, or ISP(!).
Hell, at this point I am willing to believe that all backbone pipes into Norway automatically converts this script. Maybe I should have myself filmed while doing it, and then send you the film and a zipped sample of the resulting script.
Tell you guys what, I'll contact Corey from the VMTN team who currently manages the forum and see if he can look into this and perhaps he can shed some light. I'm sure there are multiple nodes serving out this file, perhaps certain nodes is holding a corrupted version of the script or some how including the ^M character. Again for me within the US and specifically in California, I've not had any issues and I've had several people I know try the download and it works perfectly fine. No guarantee I'll get an answer from Corey, but I'll see if I can get more info on this.
In the meantime, I can put up the latest version on our site as an alternative download location and see if you guys can use wget,curl,etc to retrieve the file.
Sorry for the inconvenience, this one is definitely a funny and odd case
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I'm having exactly the same problem with tar (tar cannot store file)
VMware ESXi 4.0.0 build-219382. The datastore is a clean 1TB hard drive with VMFS 3.33, 8MB Block Size, and 930.75GB free space.
This is what happens if I do it manually:
ls -al vm1-2010-02-28/ drwxr-xr-x 1 root root 980 Feb 28 10:48 . drwxr-xr-x 1 root root 700 Feb 28 10:56 .. -rw------- 1 root root 21474836480 Feb 28 10:50 vm1-flat.vmdk -rw------- 1 root root 543 Feb 28 10:50 vm1.vmdk -rwxr-xr-x 1 root root 3591 Feb 28 10:40 vm1.vmx -rw------- 1 root root 182536110080 Feb 28 10:48 vm1_1-flat.vmdk -rw------- 1 root root 547 Feb 28 10:48 vm1_1.vmdk /vmfs/volumes/backup/vm1 # tar -cvf compressed_vm1.tgz vm1-2010-02-28/ vm1-2010-02-28/ vm1-2010-02-28/vm1.vmx tar: cannot store file 'vm1-2010-02-28/vm1_1-flat.vmdk' of size 182536110080, aborting
Thanks
hi
did you find any way of resolving the issue.
i'm downloading the file directly from esx and i'm still getting the same error
: not found.sh: line 6:
: not found.sh: line 8:
: not found.sh: line 11:
: not found.sh: line 18:
: not found.sh: line 21:
....
any pointers ?
Remove the wrong line feeds, I also suffered from them, even by directly downloading via wget. Open vi, execute the command
:%s/VM//g
which has to be entered as
:%s/\]ctrlkeyv and ctrl-keyM\]//g
See buekkes reply. And many more tips in the FAQ as well as previous comments. There are many ways to fix this, mentioned above. Or just google http://lmgtfy.com/?q=convertdosformattounix.
(Some of us are trying to pry into WHY this happens to some of us, but I sense from your post that fixing it for yourself is more within your reach...
@ippup @buekkes
Folks, please take a look at the last 5-6 posts regarding this question and this is also documented on the FAQ, specifically #17. I do ask that users go through the documentation before posting as much of the questions have been answered.
You can NOT download the script using wget from the ESXi host or using datastore browser to upload the script, these will indefinitely cause you to include the ^M character which will cause the script to have issues when you try to execute.
Regarding remediation of this issue, most of the suggestions provided by users work in removing this ^M character on classic ESX BUT not on ESXi due to the version of sed and vi. (e.g. removing ^M with <ctrv><ctrlm> within vi will just fail) Depending on the OS you have available, you can use tools like dos2unix or others to remove any of thee ^M characters before uploading to your ESX(i) host.
As mentioned in my comment on Feb 26, 2010 9:55 AM, I've contacted one of the guys who runs the VMTN community to see if he can shed any light on why only a small handful of users are having this problem, I've not been able to reproduce this problem across different OSes + browsers.
In the meantime for ALL users having this problem, I've uploaded the current version of the script onto our site and you CAN use wget on ESXi 4.0 (only system I've tested) to pull down the script:
wget http://engineering.ucsb.edu/~duonglt/vmware/ghettoVCB.sh
Remember to set executable permission on the script. Let me know if you guys run into any issues
Thanks for you patience
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Note, if you're trying to replicate the compression functionality from the script, you need to also specify "z" option which filters the archive into gzip.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
William,
it just dawned on me: Why not place the script here under attachments, plain tar-gzipped? And preferably an explanation/comment close to it, saying that this is the version to use when downloading directly using wget, as well as instructing people to extract it with "tar pxvzf ghettoVCB.tar.gz". That ought to take care of line endings as well as execute bit...
I was trying to report it as simple as possible as It doesn't matter if you add the -z or not. It has exactly the same behavior.
ls -al vm1-2010-02-28/ drwxr-xr-x 1 root root 980 Feb 28 10:48 . drwxr-xr-x 1 root root 700 Feb 28 10:56 .. -rw------- 1 root root 21474836480 Feb 28 10:50 vm1-flat.vmdk -rw------- 1 root root 543 Feb 28 10:50 vm1.vmdk -rwxr-xr-x 1 root root 3591 Feb 28 10:40 vm1.vmx -rw------- 1 root root 182536110080 Feb 28 10:48 vm1_1-flat.vmdk -rw------- 1 root root 547 Feb 28 10:48 vm1_1.vmdk /vmfs/volumes/backup/vm1 # tar -cvzf compressed_vm1.tgz vm1-2010-02-28/ vm1-2010-02-28/ vm1-2010-02-28/vm1.vmx tar: cannot store file 'vm1-2010-02-28/vm1_1-flat.vmdk' of size 182536110080, aborting
Thanks.
Our ^M-mystery aside, I have made some minor enhancements to the script. More info at http://www.idrift.no/gaute/ghettovcb/, but the main points are logging: We have tools which process logs on a daily basis and creates reports. I needed to always log ERROR: when there's an error, and to give a sort of summary at the end.
Take a look at it and feel free to incorporate anything you like. We will be rolling this out to several servers, ESX3, 3i, 4 and 4i alike. So we will get to test it thoroughly, but I want to show it to you already now to get feedback. Just look at it at http://www.idrift.no/gaute/ghettovcb/