This script performs backups of virtual machines residing on ESX(i) 3.5/4.x/5.x/6.x/7.x servers using methodology similar to VMware's VCB tool. The script takes snapshots of live running virtual machines, backs up the master VMDK(s) and then upon completion, deletes the snapshot until the next backup. The only caveat is that it utilizes resources available to the Service Console of the ESX server or Busybox Console (Tech Support Mode) of the ESXi server running the backups as opposed to following the traditional method of offloading virtual machine backups through a VCB proxy.
This script has been tested on ESX 3.5/4.x/5.x and ESXi 3.5/4.x/5.x/6.x/7.x and supports the following backup mediums: LOCAL STORAGE, SAN and NFS. The script is non-interactive and can be setup to run via cron. Currently, this script accepts a text file that lists the display names of virtual machine(s) that are to be backed up. Additionally, one can specify a folder containing configuration files on a per VM basis for granular control over backup policies.
Additionally, for ESX(i) environments that don't have persistent NFS datastores designated for backups, the script offers the ability to automatically connect the ESX(i) server to a NFS exported folder and then upon backup completion, disconnect it from the ESX(i) server. The connection is established by creating an NFS datastore link which enables monolithic (or thick) VMDK backups as opposed to using the usual *nix mount command which necessitates breaking VMDK files into the 2gbsparse format for backup. Enabling this mode is self-explanatory and will evidently be so when editing the script (Note: VM_BACKUP_VOLUME variable is ignored if ENABLE_NON_PERSISTENT_NFS=1 ).
In its current configuration, the script will allow up to 3 unique backups of the Virtual Machine before it will overwrite the previous backups; this however, can be modified to fit procedures if need be. Please be diligent in running the script in a test or staging environment before using it on production live Virtual Machines; this script functions well within our environment but there is a chance that it may not fit well into other environments.
If you have any questions, you may post in the dedicated ghettoVCB VMTN community group.
If you have found this script to be useful and would like to contribute back, please click here to donate.
Please read ALL documentation + FAQ's before posting a question about an issue or problem. Thank You
1) Download ghettoVCB from github by clicking on the ZIP button at the top and upload to either your ESX or ESXi system (use scp or WinSCP to transfer the file)
2) Extract the contents of the zip file (filename will vary):
# unzip ghettoVCB-master.zip
Archive: ghettoVCB-master.zip
creating: ghettoVCB-master/
inflating: ghettoVCB-master/README
inflating: ghettoVCB-master/ghettoVCB-restore.sh
inflating: ghettoVCB-master/ghettoVCB-restore_vm_restore_configuration_template
inflating: ghettoVCB-master/ghettoVCB-vm_backup_configuration_template
inflating: ghettoVCB-master/ghettoVCB.conf
inflating: ghettoVCB-master/ghettoVCB.sh
3) The script is now ready to be used and is located in a directory named ghettoVCB-master
# ls -l
-rw-r--r-- 1 root root 281 Jan 6 03:58 README
-rw-r--r-- 1 root root 16024 Jan 6 03:58 ghettoVCB-restore.sh
-rw-r--r-- 1 root root 309 Jan 6 03:58 ghettoVCB-restore_vm_restore_configuration_template
-rw-r--r-- 1 root root 356 Jan 6 03:58 ghettoVCB-vm_backup_configuration_template
-rw-r--r-- 1 root root 631 Jan 6 03:58 ghettoVCB.conf
-rw-r--r-- 1 root root 49375 Jan 6 03:58 ghettoVCB.sh
4) Before using the scripts, you will need to enable the execute permission on both ghettoVCB.sh and ghettoVCB-restore.sh by running the following:
chmod +x ghettoVCB.shchmod +x ghettoVCB-restore.sh
The following variables need to be defined within the script or in VM backup policy prior to execution.
Defining the backup datastore and folder in which the backups are stored (if folder does not exist, it will automatically be created):
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
Defining the backup disk format (zeroedthick, eagerzeroedthick, thin, and 2gbsparse are available):
DISK_BACKUP_FORMAT=thin
Note: If you are using the 2gbsparse on an ESXi 5.1 host, backups may fail. Please download the latest version of the ghettoVCB script which automatically resolves this or take a look at this article for the details.
Defining the backup rotation per VM:
VM_BACKUP_ROTATION_COUNT=3
Defining whether the VM is powered down or not prior to backup (1 = enable, 0 = disable):
Note: VM(s) that are powered off will not require snapshoting
POWER_VM_DOWN_BEFORE_BACKUP=0
Defining whether the VM can be hard powered off when "POWER_VM_DOWN_BEFORE_BACKUP" is enabled and VM does not have VMware Tools installed
ENABLE_HARD_POWER_OFF=0
If "ENABLE_HARD_POWER_OFF" is enabled, then this defines the number of (60sec) iterations the script will before executing a hard power off when:
ITER_TO_WAIT_SHUTDOWN=3
The number (60sec) iterations the script will wait when powering off the VM and will give up and ignore the particular VM for backup:
POWER_DOWN_TIMEOUT=5
The number (60sec) iterations the script will wait when taking a snapshot of a VM and will give up and ignore the particular VM for backup:
Note: Default value should suffice
SNAPSHOT_TIMEOUT=15
Defining whether or not to enable compression (1 = enable, 0 = disable):
ENABLE_COMPRESSION=0
NOTE: With ESXi 3.x/4.x/5.x, there is a limitation of the maximum size of a VM for compression within the unsupported Busybox Console which should not affect backups running classic ESX 3.x,4.x or 5.x. On ESXi 3.x the largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
Defining the adapter type for backed up VMDK (DEPERCATED - NO LONGER NEEDED😞
ADAPTER_FORMAT=buslogic
Defining whether virtual machine memory is snapped and if quiescing is enabled (1 = enable, 0 = disable):
Note: By default both are disabled
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
NOTE: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relevant to the actual snapshot and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
Defining VMDK(s) to backup from a particular VM either a list of vmdks or "all"
VMDK_FILES_TO_BACKUP="myvmdk.vmdk"
Defining whether or not VM(s) with existing snapshots can be backed up. This flag means it will CONSOLIDATE ALL EXISTING SNAPSHOTS for a VM prior to starting the backup (1 = yes, 0 = no):
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
Defining the order of which VM(s) should be shutdown first, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_SHUTDOWN_ORDER=vm1,vm2,vm3
Defining the order of VM(s) that should be started up first after backups have completed, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_STARTUP_ORDER=vm3,vm2,vm1
Defining NON-PERSISTENT NFS Backup Volume (1 = yes, 0 = no):
ENABLE_NON_PERSISTENT_NFS=0
NOTE: This is meant for environments that do not want a persisted connection to their NFS backup volume and allows the NFS volume to only be mounted during backups. The script expects the following 5 variables to be defined if this is to be used: UNMOUNT_NFS, NFS_SERVER, NFS_MOUNT, NFS_LOCAL_NAME and NFS_VM_BACKUP_DIR
Defining whether or not to unmount the NFS backup volume (1 = yes, 0 = no):
UNMOUNT_NFS=0
Defining the NFS server address (IP/hostname):
NFS_SERVER=172.51.0.192
Defining the NFS export path:
NFS_MOUNT=/upload
Defining the NFS datastore name:
NFS_LOCAL_NAME=backup
Defining the NFS backup directory for VMs:
NFS_VM_BACKUP_DIR=mybackups
NOTE: Only supported if you are running vSphere 4.1 and this feature is experimental. If you are having issues with sending mail, please take a look at Email Backup Log section
Defining whether or not to email backup logs (1 = yes, 0 = no):
EMAIL_LOG=1
Defining whether or not to email message will be deleted off the host whether it is successful in sending, this is used for debugging purposes. (1 = yes, 0 = no):
EMAIL_DEBUG=1
Defining email server:
EMAIL_SERVER=auroa.primp-industries.com
Defining email server port:
EMAIL_SERVER_PORT=25
Defining email delay interval (useful if you have slow SMTP server and would like to include a delay in netcat using -i param, default is 1second):
EMAIL_DELAY_INTERVAL=1
Defining recipient of the email:
EMAIL_TO=auroa@primp-industries.com
Defining from user which may require specific domain entry depending on email server configurations:
EMAIL_FROM=root@ghettoVCB
Defining to support RSYNC symbolic link creation (1 = yes, 0 = no):
RSYNC_LINK=0
Note: This enables an automatic creation of a generic symbolic link (both a relative & absolution path) in which users can refer to run replication backups using rsync from a remote host. This does not actually support rsync backups with ghettoVCB. Please take a look at the Rsync Section of the documentation for more details.
# cat ghettoVCB.conf
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=3
POWER_DOWN_TIMEOUT=5
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
ENABLE_NON_PERSISTENT_NFS=0
UNMOUNT_NFS=0
NFS_SERVER=172.30.0.195
NFS_MOUNT=/nfsshare
NFS_LOCAL_NAME=nfs_storage_backup
NFS_VM_BACKUP_DIR=mybackups
SNAPSHOT_TIMEOUT=15
EMAIL_LOG=0
EMAIL_SERVER=auroa.primp-industries.com
EMAIL_SERVER_PORT=25
EMAIL_DELAY_INTERVAL=1
EMAIL_TO=auroa@primp-industries.com
EMAIL_FROM=root@ghettoVCB
WORKDIR_DEBUG=0
VM_SHUTDOWN_ORDER=
VM_STARTUP_ORDER=
To override any existing configurations within the ghettoVCB.sh script and to use a global configuration file, user just needs to specify the new flag -g and path to global configuration file (For an example, please refer to the sample execution section of the documenation)
Running multiple instances of ghettoVCB is now supported with the latest release by specifying the working directory (-w) flag.
By default, the working directory of the ghettoVCB instance is /tmp/ghettoVCB.work and you can run another instance by providing an alternate working directory. You should try to minimize the number of ghettoVCB instances running on your ESXi host as it does consume some amount of resources when running in the ESXi Shell. This is considered an experimental feature, so please test in a development environment to ensure everything is working prior to moving to production system.
Ensure that you do not edit past this section:
########################## DO NOT MODIFY PAST THIS LINE ##########################
# ./ghettoVCB.sh
###############################################################################
#
# ghettoVCB for ESX/ESXi 3.5, 4.x+ and 5.x
# Author: William Lam
# http://www.virtuallyghetto.com/
# Documentation: http://communities.vmware.com/docs/DOC-8760
# Created: 11/17/2008
# Last modified: 2012_12_17 Version 0
#
###############################################################################
Usage: ghettoVCB.sh [options]
OPTIONS:
-a Backup all VMs on host
-f List of VMs to backup
-m Name of VM to backup (overrides -f)
-c VM configuration directory for VM backups
-g Path to global ghettoVCB configuration file
-l File to output logging
-w ghettoVCB work directory (default: )
-d Debug level [info|debug|dryrun] (default: info)
(e.g.)
Backup VMs stored in a list
./ghettoVCB.sh -f vms_to_backup
Backup a single VM
./ghettoVCB.sh -m vm_to_backup
Backup all VMs residing on this host
./ghettoVCB.sh -a
Backup all VMs residing on this host except for the VMs in the exclusion list
./ghettoVCB.sh -a -e vm_exclusion_list
Backup VMs based on specific configuration located in directory
./ghettoVCB.sh -f vms_to_backup -c vm_backup_configs
Backup VMs using global ghettoVCB configuration file
./ghettoVCB.sh -f vms_to_backup -g /global/ghettoVCB.conf
Output will log to /tmp/ghettoVCB.log (consider logging to local or remote datastore to persist logs)
./ghettoVCB.sh -f vms_to_backup -l /vmfs/volume/local-storage/ghettoVCB.log
Dry run (no backup will take place)
./ghettoVCB.sh -f vms_to_backup -d dryrun
The input to this script is a file that contains the display name of the virtual machine(s) separated by a newline. When creating this file on a non-Linux/UNIX system, you may introduce ^M character which can cause the script to miss-behave. To ensure this does not occur, plesae create the file on the ESX/ESXi host.
Here is a sample of what the file would look like:
[root@himalaya ~]# cat vms_to_backup
vCOPS
vMA
vCloudConnector
Debug Mode
Note: This execution mode provides a qucik summary of details on whether a given set of VM(s)/VMDK(s) will be backed up. It provides additional information such as VMs that may have snapshots, VMDK(s) that are configured as independent disks, or other issues that may cause a VM or VMDK to not backed up.
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d dryrun
Logging output to "/tmp/ghettoVCB-2011-03-13_15-19-57.log" ...
2011-03-13 15:19:57 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:19:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:19:57 -- info: CONFIG - GHETTOVCB_PID = 30157
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-19-57
2011-03-13 15:19:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:19:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:19:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:19:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:19:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:19:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:19:57 -- info: CONFIG - LOG_LEVEL = dryrun
2011-03-13 15:19:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-19-57.log
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:19:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:19:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:19:57 -- info:
2011-03-13 15:19:57 -- dryrun: ###############################################
2011-03-13 15:19:57 -- dryrun: Virtual Machine: scofield
2011-03-13 15:19:57 -- dryrun: VM_ID: 704
2011-03-13 15:19:57 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield
2011-03-13 15:19:57 -- dryrun: VMX_CONF: scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:57 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: scofield_3.vmdk 3 GB
2011-03-13 15:19:58 -- dryrun: scofield_2.vmdk 2 GB
2011-03-13 15:19:58 -- dryrun: scofield_1.vmdk 1 GB
2011-03-13 15:19:58 -- dryrun: scofield.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 11 GB
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vMA
2011-03-13 15:19:58 -- dryrun: VM_ID: 1440
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: vMA-000002.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 5 GB
2011-03-13 15:19:58 -- dryrun: Snapshots found for this VM, please commit all snapshots before continuing!
2011-03-13 15:19:58 -- dryrun: THIS VIRTUAL MACHINE WILL NOT BE BACKED UP DUE TO EXISTING SNAPSHOTS!
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vCloudConnector
2011-03-13 15:19:58 -- dryrun: VM_ID: 2064
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector.vmdk 3 GB
2011-03-13 15:19:59 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector_1.vmdk 40 GB
2011-03-13 15:19:59 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 3 GB
2011-03-13 15:19:59 -- dryrun: Snapshots can not be taken for indepdenent disks!
2011-03-13 15:19:59 -- dryrun: THIS VIRTUAL MACHINE WILL NOT HAVE ALL ITS VMDKS BACKED UP!
2011-03-13 15:19:59 -- dryrun: ###############################################
2011-03-13 15:19:59 -- info: ###### Final status: OK, only a dryrun. ######
2011-03-13 15:19:59 -- info: ============================== ghettoVCB LOG END ================================
In the example above, we have 3 VMs to be backed up:
Note: This execution modes provides more in-depth information about environment/backup process including additional storage debugging information which provides information about both the source/destination datastore pre and post backups. This can be very useful in troubleshooting backups
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d debug
Logging output to "/tmp/ghettoVCB-2011-03-13_15-27-59.log" ...
2011-03-13 15:27:59 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:27:59 -- debug: Succesfully acquired lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:27:59 -- debug: HOST VERSION: VMware ESX 4.1.0 build-260247
2011-03-13 15:27:59 -- debug: HOST LEVEL: VMware ESX 4.1.0 GA
2011-03-13 15:27:59 -- debug: HOSTNAME: himalaya.primp-industries.com
2011-03-13 15:27:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:27:59 -- info: CONFIG - GHETTOVCB_PID = 31074
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-27-59
2011-03-13 15:27:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:27:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:27:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:27:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:27:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:27:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:27:59 -- info: CONFIG - LOG_LEVEL = debug
2011-03-13 15:27:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-27-59.log
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:27:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:27:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:27:59 -- info:
2011-03-13 15:28:01 -- debug: Storage Information before backup:
2011-03-13 15:28:01 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:01 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:28:01 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:28:01 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:02 -- info: Initiate backup for scofield
2011-03-13 15:28:02 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_3.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk'...
Clone: 37% done.
2011-03-13 15:28:04 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_2.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 85% done.
2011-03-13 15:28:05 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_1.vmdk"
2011-03-13 15:28:06 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk'...
Clone: 78% done.
2011-03-13 15:29:52 -- info: Backup Duration: 1.83 Minutes
2011-03-13 15:29:52 -- info: Successfully completed backup for scofield!
2011-03-13 15:29:54 -- debug: Storage Information after backup:
2011-03-13 15:29:54 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:54 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:54 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:54 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:55 -- debug: Storage Information before backup:
2011-03-13 15:29:55 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:55 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:55 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:29:57 -- debug: Storage Information before backup:
2011-03-13 15:29:57 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:57 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:57 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:57 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:58 -- info: Initiate backup for vCloudConnector
2011-03-13 15:29:58 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vCloudConnector/vCloudConnector-2011-03-13_15-27-59/vCloudConnector.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 97% done.
2011-03-13 15:30:45 -- info: Backup Duration: 47 Seconds
2011-03-13 15:30:45 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:30:45 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:30:45 -- debug: Succesfully removed lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:30:45 -- info: ============================== ghettoVCB LOG END ================================
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup
# ./ghettoVCB.sh -m MyVM
/ghettoVCB # ./ghettoVCB.sh -a
/ghettoVCB # ./ghettoVCB.sh -a -e vm_exclusion_list
1. Create folder to hold individual VM backup policies (can be named anything):
[root@himalaya ~]# mkdir backup_config
2. Create individual VM backup policies for each VM that ensure each file is named exactly as the display name of the VM being backed up (use provided template to create duplicates):
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template scofield
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template vCloudConnector
Listing of VM backup policy within backup configuration directory
[root@himalaya backup_config]# ls
scofield vCloudConnector
ghettoVCB-vm_backup_configuration_template
Backup policy for "scofield" (backup only 2 specific VMDKs)
[root@himalaya backup_config]# cat scofield
scofield_2.vmdk,scofield_1.vmdk
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Backup policy for VM "vCloudConnector" (backup all VMDKs found)
[root@himalaya backup_config]# cat
vCloudConnectorVM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
vCloudConnector.vmdk
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Note: When specifying -c option (individual VM backup policy mode) if a VM is listed in the backup list but DOES NOT have a corresponding backup policy, the VM will be backed up using the default configuration found within the ghettoVCB.sh script.
Execution of backup
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup -c backup_config -l /tmp/ghettoVCB.log
2011-03-13 15:40:50 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:40:51 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//scofield
2011-03-13 15:40:51 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:51 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:51 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:51 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:51 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:51 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:51 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:51 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:51 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:51 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:51 -- info: CONFIG - VMDK_FILES_TO_BACKUP = scofield_2.vmdk,scofield_1.vmdk
2011-03-13 15:40:51 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:51 -- info:
2011-03-13 15:40:53 -- info: Initiate backup for scofield
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 100% done.
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk'...
Clone: 100% done.
2011-03-13 15:40:55 -- info: Backup Duration: 2 Seconds
2011-03-13 15:40:55 -- info: Successfully completed backup for scofield!
2011-03-13 15:40:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:57 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:40:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:57 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:40:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:57 -- info:
2011-03-13 15:40:59 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:40:59 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//vCloudConnector
2011-03-13 15:40:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:59 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:59 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = vCloudConnector.vmdk
2011-03-13 15:40:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:59 -- info:
2011-03-13 15:41:01 -- info: Initiate backup for vCloudConnector
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 100% done.
2011-03-13 15:41:51 -- info: Backup Duration: 50 Seconds
2011-03-13 15:41:51 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:41:51 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:41:51 -- info: ============================== ghettoVCB LOG END ================================
Please take a look at FAQ #25 for more details before continuing
To make use of this feature, modify the variable ENABLE_COMPRESSION from 0 to 1. Please note, do not mix uncompressed backups with compressed backups. Ensure that directories selected for backups do not contain any backups with previous versions of ghettoVCB before enabling and implementing the compressed backups feature.
nc (netcat) utility must be present for email support to function, this utility is a now a default with the release of vSphere 4.1 or greater, previous releases of VI 3.5 and/or vSphere 4.0 does not contain this utility. The reason this is listed as experimental is it may not be compatible with all email servers as the script utlizes nc (netcat) utility to communicate to an email server. This feature is provided as-is with no guarantees. If you enable this feature, a separate log will be generated along side any normal logging which will be used to email recipient. If for whatever reason, the email fails to send, an entry will appear per the normal logging mechanism.
Users should also make note due to limited functionality of netcat, it uses SMTP pipelining which is not the most ideal method of communicating with an SMTP server. Email from ghettoVCB may not work if your email server does not support this feature.
You can define an email recipient in the following two ways:
EMAIL_TO=william@virtuallyghetto.com
OR
EMAIL_TO=william@virtuallyghetto.com,tuan@virtuallyghetto.com
If you are running ESXi 5.1, you will need to create a custom firewall rule to allow your email traffic to go out which I will assume is default port 25. Here are the steps for creating a custom email rule.
Step 1 - Create a file called /etc/vmware/firewall/email.xml with contains the following:
<ConfigRoot>
<service>
<id>email</id>
<rule id="0000">
<direction>outbound</direction>
<protocol>tcp</protocol>
<porttype>dst</porttype>
<port>25</port>
</rule>
<enabled>true</enabled>
<required>false</required>
</service>
</ConfigRoot>
Step 2 - Reload the ESXi firewall by running the following ESXCLI command:
~ #
esxcli network firewall refresh
Step 3 - Confirm that your email rule has been loaded by running the following ESXCLI command:
~ # esxcli network firewall ruleset list | grep email
email true
Step 4 - Connect to your email server by usingn nc (netcat) by running the following command and specifying the IP Address/Port of your email server:
~ # nc 172.30.0.107 25
220 mail.primp-industries.com ESMTP Postfix
You should recieve a response from your email server and you can enter Ctrl+C to exit. This custom ESXi firewall rule will not persist after a reboot, so you should create a custom VIB to ensure it persists after a system reboot. Please take a look at this article for the details.
To make use of this feature, modify the variable RSYNC_LINK from 0 to 1. Please note, this is an experimental feature request from users that rely on rsync to replicate changes from one datastore volume to another datastore volume. The premise of this feature is to have a standardized folder that rsync can monitor for changes to replicate to another backup datastore. When this feature is enabled, a symbolic link will be generated with the format of "<VMNAME>-symlink" and will reference the latest successful VM backup. You can then rely on this symbolic link to watch for changes and replicate to your backup datastore.
Here is an example of what this would look like:
[root@himalaya ghettoVCB]# ls -la /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/
total 0
drwxr-xr-x 1 nobody nobody 110 Sep 27 08:08 .
drwxr-xr-x 1 nobody nobody 17 Sep 16 14:01 ..
lrwxrwxrwx 1 nobody nobody 89 Sep 27 08:08 vcma-symlink -> /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/vcma-2010-09-27_08-07-37
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:04 vcma-2010-09-27_08-04-26
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:06 vcma-2010-09-27_08-05-55
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:08 vcma-2010-09-27_08-07-37
FYI - This feature has not been tested, please provide feedback if this does not work as expected.
To recover a VM that has been processed by ghettoVCB, please take a look at this document: Ghetto Tech Preview - ghettoVCB-restore.sh - Restoring VM's backed up from ghettoVCB to ESX(i) 3.5, ...
There may be a situation where you need to stop the ghettoVCB process and entering Ctrl+C will only kill off the main ghettoVCB process, however there may still be other spawn processes that you may need to identify and stop. Below are two scenarios you may encounter and the process to completely stop all processes related to ghettoVCB.
Step 1 - Press Ctrl+C which will kill off the main ghettoVCB instance
Step 2 - Search for any existing ghettoVCB process by running the following:
# ps -c | grep ghettoVCB | grep -v grep
3360136 3360136 tail tail -f /tmp/ghettoVCB.work/ghettovcb.Cs1M1x
Step 3 - Here we can see there is a tail command that was used in the script. We need to stop this process by using the kill command which accepts the PID (Process ID) which is identified by the first value on the far left hand side of the command. In this example, it is 3360136.
# kill -9 3360136
Note: Make sure you identify the correct PID, else you could accidently impact a running VM or worse your ESXi host.
Step 4 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Step 1 - Search for the ghettoVCB process (you can also validate the PID from the logs)
~ # ps -c | grep ghettoVCB | grep -v grep
3360393 3360393 busybox ash ./ghettoVCB.sh -f list -d debug
3360790 3360790 tail tail -f /tmp/ghettoVCB.work/ghettovcb.deGeB7
Step 2 - Stop both the main ghettoVCB instance & tail command by using the kill command and specifying their respective PID IDs:
kill -9 3360393
kill -9 3360790
Step 3 - If a VM was in the process of being backed up, there is an additional process for the actual vmkfstools copy. You will need to identify the process for that and kill that as well. We will again use ps -c command and search for any vmkfstools that are running:
# ps -c | grep vmkfstools | grep -v grep
3360796 3360796 vmkfstools /sbin/vmkfstools -i /vmfs/volumes/himalaya-temporary/VC-Windows/VC-Windows.vmdk -a lsilogic -d thin /vmfs/volumes/test-dont-use-this-volume/backups/VC-Windows/VC-Windows-2013-01-26_16-45-35/VC-Windows.vmdk
Step 4 - In case there is someone manually running a vmkfstools, make sure you take a look at the command itself and that it maps back to the current VM that was being backed up before kill the process. Once you have identified the proper PID, go ahead and use the kill command:
# kill -9 3360796
Step 5 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Please take a moment to read over what is a cronjob and how to set one up, before continuing
The task of configuring cronjobs on classic ESX servers (with Service Console) is no different than traditional cronjobs on *nix operating systems (this procedure is outlined in the link above). With ESXi on the other hand, additional factors need to be taken into account when setting up cronjobs in the limited shell console called Busybox because changes made do not persist through a system reboot. The following document will outline steps to ensure that cronjob configurations are saved and present upon a reboot.
Important Note: Always redirect the ghettoVCB output to /dev/null and/or to a log when automating via cron, this becomes very important as one user has identified a limited amount of buffer capacity in which once filled, may cause ghettoVCB to stop in the middle of a backup. This primarily only affects users on ESXi, but it is good practice to always redirect the output. Also ensure you are specifying the FULL PATH when referencing the ghettoVCB script, input or log files.
e.g.
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /dev/null
or
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /tmp/ghettoVCB.log
Task: Configure ghettoVCB.sh to execute a backup five days a week (M-F) at 12AM (midnight) everyday and send output to a unique log file
Configure on ESX:
1. As root, you'll install your cronjob by issuing:
[root@himalaya ~]# crontab -e
2. Append the following entry:
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
3. Save and exit
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -e
no crontab for root - using an empty one
crontab: installing new crontab
4. List out and verify the cronjob that was just created:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -l
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
You're ready to go!
Configure on ESXi:
1. Setup the cronjob by appending the following line to /var/spool/cron/crontabs/root:
0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-$(date +\%s).log
If you are unable to edit/modify /var/spool/cron/crontabs/root, please make a copy and then edit the copy with the changes
cp /var/spool/cron/crontabs/root /var/spool/cron/crontabs/root.backup
Once your changes have been made, then "mv" the backup to the original file. This may occur on ESXi 4.x or 5.x hosts
mv /var/spool/cron/crontabs/root.backup /var/spool/cron/crontabs/root
You can now verify the crontab entry has been updated by using "cat" utility.
2. Kill the current crond (cron daemon) and then restart the crond for the changes to take affect:
On ESXi < 3.5u3
kill $(ps | grep crond | cut -f 1 -d ' ')
On ESXi 3.5u3+
~ # kill $(pidof crond)
~ # crond
On ESXi 4.x/5.0
~ # kill $(cat /var/run/crond.pid)
~ # busybox crond
On ESXi 5.1 to 6.x
~ # kill $(cat /var/run/crond.pid)
~ # crond
On ESXi 7.x
~ # kill $(cat /var/run/crond.pid)
~ # /usr/lib/vmware/busybox/bin/busybox crond
3. Now that the cronjob is ready to go, you need to ensure that this cronjob will persist through a reboot. You'll need to add the following two lines to /etc/rc.local (ensure that the cron entry matches what was defined above). In ESXi 5.1, you will need to edit /etc/rc.local.d/local.sh instead of /etc/rc.local as that is no longer valid.
On ESXi 3.5
/bin/kill $(pidof crond)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 4.x/5.0
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
On ESXi 5.1 to 6.x
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 7.x
/bin/kill $(cat /var/run/crond.pid) > /dev/null 2>&1
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/usr/lib/vmware/busybox/bin/busybox crond
Afterwards the file should look like the following:
~ # cat /etc/rc.local
#! /bin/ash
export PATH=/sbin:/bin
log() {
echo "$1"
logger init "$1"
}
#execute all service retgistered in /etc/rc.local.d
if [http:// -d /etc/rc.local.d |http:// -d /etc/rc.local.d ]; then
for filename in `find /etc/rc.local.d/ | sort`
do
if [ -f $filename ] && [ -x $filename ]; then
log "running $filename"
$filename
fi
done
fi
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
This will ensure that the cronjob is re-created upon a reboot of the system through a startup script
2. To ensure that this is saved in the ESXi configuration, we need to manually initiate an ESXi backup by running:
~ # /sbin/auto-backup.sh
config implicitly loaded
local.tgz
etc/vmware/vmkiscsid/vmkiscsid.db
etc/dropbear/dropbear_dss_host_key
etc/dropbear/dropbear_rsa_host_key
etc/opt/vmware/vpxa/vpxa.cfg
etc/opt/vmware/vpxa/dasConfig.xml
etc/sysconfig/network
etc/vmware/hostd/authorization.xml
etc/vmware/hostd/hostsvc.xml
etc/vmware/hostd/pools.xml
etc/vmware/hostd/vmAutoStart.xml
etc/vmware/hostd/vmInventory.xml
etc/vmware/hostd/proxy.xml
etc/vmware/ssl/rui.crt
etc/vmware/ssl/rui.key
etc/vmware/vmkiscsid/initiatorname.iscsi
etc/vmware/vmkiscsid/iscsid.conf
etc/vmware/vmware.lic
etc/vmware/config
etc/vmware/dvsdata.db
etc/vmware/esx.conf
etc/vmware/license.cfg
etc/vmware/locker.conf
etc/vmware/snmp.xml
etc/group
etc/hosts
etc/inetd.conf
etc/rc.local
etc/chkconfig.db
etc/ntp.conf
etc/passwd
etc/random-seed
etc/resolv.conf
etc/shadow
etc/sfcb/repository/root/interop/cim_indicationfilter.idx
etc/sfcb/repository/root/interop/cim_indicationhandlercimxml.idx
etc/sfcb/repository/root/interop/cim_listenerdestinationcimxml.idx
etc/sfcb/repository/root/interop/cim_indicationsubscription.idx
Binary files /etc/vmware/dvsdata.db and /tmp/auto-backup.31345.dir/etc/vmware/dvsdata.db differ
config implicitly loaded
Saving current state in /bootbank
Clock updated.
Time: 20:40:36 Date: 08/14/2009 UTC
Now you're really done!
If you're still having trouble getting the cronjob to work, ensure that you've specified the correct parameters and there aren’t any typos in any part of the syntax.
Ensure crond (cron daemon) is running:
ESX 3.x/4.0:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# ps -ef | grep crond | grep -v grep
root 2625 1 0 Aug13 ? 00:00:00 crond
ESXi 3.x/4.x/5.x:
~ # ps | grep crond | grep -v grep
5196 5196 busybox crond
Ensure that the date/time on your ESX(i) host is setup correctly:
ESX(i):
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# date
Fri Aug 14 23:44:47 PDT 2009
Note: Careful attention must be noted if more than one backup is performed per day. Backup windows should be staggered to avoid contention or saturation of resources during these periods.
0Q: I'm getting error X when using the script or I'm not getting any errors, the backup didn’t even take place. What can I do?
0A: First off, before posting a comment/question, please thoroughly read through the ENTIRE documentation including the FAQs to see if your question has already been ansered.
1Q: I've read through the entire documentation + FAQs and still have not found my answer to the problem I'm seeing. What can I do?
1A: Please join the ghettoVCB Group to post your question/comment.
2Q: I've sent you private message or email but I haven't received a response? What gives?
2A: I do not accept issues/bugs reported via PM or email, I will reply back, directing you to post on the appropriate VMTN forum (that's what it's for). If the data/results you're providing is truely senstive to your environment I will hear you out, but 99.99% it is not, so please do not messsage/email me directly. I do monitor all forums that contain my script including the normal VMTN forums and will try to get back to your question as soon as I can and as time permits. Please do be patient as you're not the only person using the script (600,000+ views), thank you.
3Q: Can I schedule backups to take place hourly, daily, monthly, yearly?
3A: Yes, do a search online for crontab.
4Q: I would like to setup cronjob for ESX(i) 3.5 or 4.0?
4A: Take a look at the Cronjob FAQ section in this document.
5Q: I want to schedule my backup on Windows, how do I do this?
5A: Do a search for plink. Make sure you have paired SSH keys setup between your Windows system and ESX/ESXi host.
6Q: I only have a single ESXi host. I want to take backups and store them somewhere else. The problem is: I don't have NFS, iSCSI nor FC SAN. What can I do?
6A: You can use local storage to store your backups assuming that you have enough space on the destination datastore. Afterwards, you can use scp (WinSCP/FastSCP) to transfer the backups from the ESXi host to your local desktop.
7Q: I’m pissed; the backup is taking too long. My datastore is of type X?
7A: YMMV, take a look at your storage configuration and make sure it is optimized.
8Q: I noticed that the backup rotation is occurring after a backup. I don't have enough local storage space, can the process be changed?
8A: This is primarily done to ensure that you have at least one good backup in case the new backup fails. If you would like to modify the script, you're more than welcome to do so.
9Q: What is the best storage configuration for datastore type X?
9A: Search the VMTN forums; there are various configurations for the different type of storage/etc.
10Q: I want to setup an NFS server to run my backups. Which is the best and should it be virtual or physical?
10A: Please refer to answer 7A. From experience, we’ve seen physical instances of NFS servers to be faster than their virtual counterparts. As always, YMMV.
11Q: I have VMs that have snapshots. I want to back these things up but the script doesn’t let me do it. How do I fix that?
11A: VM snapshots are not meant to be kept for long durations. When backing up a VM that contains a snapshot, you should ensure all snapshots have been committed prior to running a backup. No exceptions will be made…ever.
12Q: I would like to restore from backup, what is the best method?
12A: The restore process will be unique for each environment and should be determined by your backup/recovery plans. At a high level you have the option of mounting the backup datastore and registering the VM in question or copy the VM from the backup datastore to the ESX/ESXi host. The latter is recommended so that you're not running a VM living on the backup datastore or inadvertently modifying your backup VM(s). You can also take a look at ghettoVCB-restore which is experimentally supported.
13Q: When I try to run the script I get: "-bash: ./ghettoVCB.sh: Permission denied", what is wrong?
13A: You need to change the permission on the script to be executable, chmod +x ghettoVCB.sh
14Q: Where can I download the latest version of the script?
14A: The latest version is available on on github - https://github.com/lamw/ghettoVCB/downloads
15Q: I would like to suggest/recommend feature X, can I get it? When can I get it? Why isn't it here, what gives?
15A: The general purpose of this script is to provide a backup solution around VMware VMs. Any additional features outside of that process will be taken into consideration depending on the amount of time, number of requests and actual usefulness as a whole to the community rather than to an individual.
16Q: I have found this script to be very useful and would like to contribute back, what can I do?
16A: To continue to develop and share new scripts and resources with the community, we need your support. You can donate here Thank You!
17Q: What are the different type of backup uses cases that are supported with ghettoVCB?
17A: 1) Live backup of VM with the use of a snapshot and 2) Offline backup of a VM without a snapshot. These are the only two use cases supported by the script.
18Q: When I execute the script on ESX(i) I get some funky errors such as ": not found.sh" or "command not found". What is this?
18A: Most likely you have some ^M characters within the script which may have come from either editing the script using Windows editor, uploading the script using the datastore browser OR using wget. The best option is to either using WinSCP on Windows to upload the script and edit using vi editor on ESX(i) host OR Linux/UNIX scp to copy the script into the host. If you still continue to have the issue, do a search online on various methods of removing this Windows return carriage from the script
19Q: My backup works fine OR it works for a single backup but I get an error message "Input/output error" or "-ash: YYYY-MM-DD: not found" during the snapshot removal process. What is this?
19A: The issue has been recently identified by few users as a problem with user's NFS server in which it reports an error when deleting large files that take longer than 10seconds. VMware has recently released a KB article http://kb.vmware.com/kb/1035332 explaining the details and starting with vSphere 4.1 Update 2 or vSphere 5.0, a new advanced ESX(i) parameter has been introduced to increase the timeout. This has resolved the problem for several users and maybe something to consider if you are running into this issue, specifically with NFS based backups.
20Q: Will this script function with vCenter and DRS enabled?
20Q: No, if the ESX(i) hosts are in a DRS enabled cluster, VMs that are to be backed up could potentially be backed up twice or never get backed up. The script is executed on a per host basis and one would need to come up a way of tracking backups on all hosts and perhaps write out to external file to ensure that all VMs are backed up. The main use case for this script are for standalone ESX(i) host
21Q: I'm trying to use WinSCP to manually copy VM files but it's very slow or never completes on huge files, why is that?
21A: WinSCP was not designed for copying VM files out of your ESX(i) host, take a look at Veeam's FastSCP which is designed for moving VM files and is a free utility.
22Q: Can I use setup NFS Server using Windows Services for UNIX (WSFU) and will it work?
22A: I've only heard a handful of users that have successfully implemented WSFU and got it working, YMMV. VMware also has a KB article decribing the setup process here: http://kb.vmware.com/kb/1004490 for those that are interested. Here is a thread on a user's experience between Windows Vs. Linux NFS that maybe helpful.
23Q: How do VMware Snapshots work?
23A: http://kb.vmware.com/kb/1015180
24Q: What files make up a Virtual Machine?
24A: http://virtualisedreality.wordpress.com/2009/09/16/quick-reminder-of-what-files-make-up-a-virtual-ma...
25Q: I'm having some issues restoring a compressed VM backup?
25A: There is a limitation in the size of the VM for compression under ESXi 3.x & 4.x, this limitation is in the unsupported Busybox console and should not affect classic ESX 3.x/4.x. On ESXi 3.x, the maximum largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
26Q: I'm backing up my VM as "thin" format but I'm still not noticing any size reduction in the backup? What gives?
2bA: Please refer to this blog post which explains what's going on: http://www.yellow-bricks.com/2009/07/31/storage-vmotion-and-moving-to-a-thin-provisioned-disk/
27Q: I've enabled VM_SNAPSHOT_MEMORY and when I restore my VM it's still offline, I thought this would keep it's memory state?
27A: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relavent to the actual snapshot itself and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
28Q: Can I rename the directories and the VMs after a VM has been backed up?
28A: The answer yes, you can ... but you may run into all sorts of issues which may break the backup process. The script expects a certain layout and specific naming scheme for it to maintain the proper rotation count. If you need to move or rename a VM, please take it out of the directory and place it in another location
29Q: Can ghettoVCB support CBT (Change Block Tracking)?
29A: No, that is a functionality of the vSphere API + VDDK API (vSphere Disk Development Kit). You will need to look at paid solutions such as VMware vDR, Veeam Backup & Recovery, PHD Virtual Backups, etc. to leverage that functionailty.
30Q: Does ghettoVCB support rsync backups?
30A: Currently ghettoVCB does not support rsync backups, you either obtain or compile your own static rsync binary and run on ESXi, but this is an unsupported configuration. You may take a look at this blog post for some details.
31Q: How can I contribute back?
31A: You can provide feedback/comments on the ghettoVCB Group. If you have found this script to be useful and would like to contribute back, please click here to donate.
32Q: How can select individual VMDKs to backup from a VM?
32A: Ideally you would use the "-c" option which requires you to create individual VM configuration file, this is where you would select specific VMDKs to backup. Note, that if you do not need to define all properties, anything not defined will adhere from the default global properties whether you're editing the ghettoVCB.sh script or using ghettoVCB global configuration file. It is not recommended that you edit the ghettoVCB.sh script and modify the VMDK_FILES_TO_BACKUP variable, but if you would like to keep everything in one script, you may add the extensive list of VMDKs to backup but do know this can get error prone as script may be edited frequently and lose some flexibility to support multiple environments.
33Q: Why is email not working when I'm using ESXi 5.x but it worked in ESXi 4.x?
33A: ESXi 5.x has implemented a new firewall which requires the email port that is being used to be opened. Please refer to the following articles on creating a custom firewall rule for email:
http://www.virtuallyghetto.com/2012/09/creating-custom-vibs-for-esxi-50-51.html
How to Create Custom Firewall Rules in ESXi 50
How to Persist Configuration Changes in ESXi 4.x/5.x Part 1
How to Persist Configuration Changes in ESXi 4.x/5.x Part 2
34Q: How do I stop the ghettoVCB process?
34A: Take a look at the Stopping ghettoVCB Process section of the documentation for more details.
Many have asked what is the best configuration and recommendation for setting up a cheap NFS Server to run backups for VMs. This has been a question we've tried to stay away from just because the possiblities and solutions are endless. One can go with physical vs. virtual, use VSA (Virtual Storage Appliances) such as OpenFiler or Lefthand Networks, Windows vs. Linux/UNIX. We've not personally tested and verify all these solutions and it all comes down to "it depends" type of answer. Though from our experience, we've had much better success with a physical server than a virtual.
It is also well known that some users are experiencing backup issues when running specifically against NFS, primarily around the rotation and purging of previous backups. The theory from what we can tell by talking to various users is that when the rotation is occuring, the request to delete the file(s) may take awhile and does not return within a certain time frame and causes the script to error out with unexpected messages. Though the backups were successful, it will cause unexpected results with directory structures on the NFS target. We've not been able to isolate why this is occuring and maybe due to NFS configuration/exports or hardware or connection not being able to support this process.
We'll continue to help where we can in diagonising this issus but we wanted to share our current NFS configuration, perhaps it may help some users who are new or trying to setup their system. ( Disclaimer: These configurations are not recommendations nor endorsement for any of the components being used)
UPDATE: Please also read FAQ #19 for details + resolution
Server Type: Physical
Model: HP DL320 G2
OS: Arch linux 2.6.28
Disks: 2 x 1.5TB
RAID: Software RAID1
Source Host Backups: ESX 3.5u4 and ESX 4.0u1 (We don't run any ESXi hosts)
uname -a output
Linux XXXXX.XXXXX.ucsb.edu 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686 Intel(R) Pentium(R) 4 CPU 3.06GHz GenuineIntel GNU/Linux
NICs:
00:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
00:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
NFS Export Options:
/exports/vm-backups XXX.XXX.XXX.XXX/24(rw,async,all_squash,anonuid=99,anongid=99)
*One important thing to check is to verify that your NFS exportion options are setup correctly, "async" should be configured to ensure that all IO requests are processed and reply back to the client before waiting for the data to be written to the storage.
*Recently VMware released a KB article describing the various "Advanced NFS Options" and their meanings and recommendations: http://kb.vmware.com/kb/1007909 We've not personally had to touch any of these, but for other vendors such as EMC and NetApp, there are some best practices around configuring some of these values depending on the number of NFS volumes or number of ESX(i) host connecting to a volume. You may want to take a look to see if any of these options may help with NFS issue that some are seeing
*Users should also try to look at their ESX(i) host logs during the time interval when they're noticing these issues and see if they can find any correlation along with monitoring the performance on their NFS Server.
*Lastly, there are probably other things that can be done to improve NFS performance or further optimization, a simple search online will also yield many resources.
Windows utility to email ghettoVCB Backup Logs - http://www.waldrondigital.com/2010/05/11/ghettovcb-e-mail-rotate-logs-batch-file-for-vmware/
Windows front-end utility to ghettoVCB - http://www.magikmon.com/mkbackup/ghettovcb.en.html
Note: Neither of these tools are supported, for questions or comments regarding these utilities please refer to the author's pages.
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
Enhancements:
Fixes:
Big thanks to Alain Spineux and his contributions to the ghettoVCB script and helping with debugging and testing.
Enhancements:
Fixes:
Enhancements:
Enhancements:
Enhancements:
Fixes:
Fixes:
Enhancements:
Fixes:
Fixes:
Big thanks goes out to the community for the suggested features and to those that submitted snippet of their modifications.
Updated FAQ #20-24 for common issues/questions. Also included a new section about our "personal" NFS configuration and setup.
Fix the crontab section to reflect the correct syntax + updated FAQ #17,#18 and #19 for common issues.
The following enhancements and fixes have been implemented in this release of ghettoVCB. Special thanks goes out to all the ghettoVCB BETA testers for providing time and their environments to test features/fixes of the new script!
Enhancements:
Fixes:
Webifi, I second that
Hello
Same here. A global exclusion would be great
I'll add this to the backlog for the next release, should not be difficult but need to verify and test.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello,
I found a bug in the script. This bug cause the script to be unable to delete the backup folder.
The default naming convention is :
VM_BACKUP_DIR_NAMING_CONVENTION="$(date +%F_%k-%M-%S)"
this definition induce a space in the folder name from 1am to 9am
I replaced it by :
VM_BACKUP_DIR_NAMING_CONVENTION="$(date +%F_%H-%M-%S)"
And everything seems to be fine.
romgo75,
Thanks for bringing this to my attention, you're right, must have fat fingered that entry. The issue has been resolved and I've just uploaded the latest version. Please download the latest version and let me know if you run into any other issues.
Thanks
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Its my first visit to this thread for some time, as the ghettoVCB script has been running perfectly on my ESXi 3.5 setup for months. We are now in the process of migrating to ESX 4 so I thought I would drop by.
Nice to see more improvements have been added since my last visit. I am testing the latest version on our new setup and all seems to be working great so far.
Thanks again lamw
Dear lamw:
I have used this script over 1 year. it's really great. I like the new idea to seprate config file and program, so I try the new script today. however the script failed when I put "ENABLE_NON_PERSISTENT_NFS=1" to the external config file.
after checking the script, I found the script create the nfs mount at the "sanityCheck" stage. but the external config have not read yet at that stage, it will read later. so the script failed. hope it can be fixed so we can enjoy the
external settings with "ENABLE_NON_PERSISTENT_NFS=1"
and could you add "monosparse" disk format? although it didn't show in the vmkfstools command help, but that format exists at least from 3.5 to current 4.0. compare to "2gbsparse", "monosparse" is much easier to handle for rsync or rdiff-backup for second phase backup. I have used monosparse since 3.5. and it is really good.
thanks again for your kindly help!!
Hi lamw
thank you for new option: global configuratin file,
however I have same problem as tbsky.
Backup does not function if:
- ENABLE_NON_PERSISTENT_NFS=1 is defined in global configuration file
and
- NFS datastore does not mount manual before start of script
I think that script does not mount NFS datastore if script is running with parameter -g
I tested that script mounts NFS storage OK if ENABLE_NON_PERSISTENT_NFS=1 is defined in main script
Thanks
Feature request:
Could you extend the script for sending any log file by email in VMware vSphere?
Roger that, I'll take a look when I get chance, little busy this weekend but try to get something out by Sunday.
Email is not part of the scope, do a search online for email implementation. I know there are some hacks for classic ESX but not sure about ESXi and the unsupported console. I would recommend if you need this, you can dump the logs on NFS datastore and have a remote system pick them up and email. I know you can also hack around the local logger to have it direct the output to syslog and have that system handle it. In either scenario, it's not going to be handled by the script.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
The bug has been resolved, please give the latest version a try and let me know.
FYI - Also enhanced the script to allow for a VM exclusion list
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi, i'm having a strange problem with ghettovcb/esxi4:
the first backup went well, but i haven't snapshots associated with the VM and ghettovcb fails for the "snapshot found" reason.
I looked in the iSCSI disk where the vm is and it's structured like there's a backup, but the snapshot manager doesn't see it, nor it's removed by vim-cmd command.
Have someone of you had my same problem with iSCSI disks?
If i enable the poweroff backup, will it backup well even if there are the vm-000000n disks?
thank you for your help
Mattia Rambelli
Dear lamw:
the script now runs fine. but it show an error "./ghettoVCB.sh: line 798: cannot create : nonexistent directory".
after tracing, that error comes from the "logger" function. when it is called by "reConfigureGhettoVCBConfiguration()". it wants to log to $ but the variable didn't exist at that stage. it seems the chicken-egg problem. maybe "logger" function can just log to stdout if $ is empty?
and I find the script now need the "adapter" info. can we just skip that part if we need to keep the original adapter, no mater what type(buslogic or ide or ...) it is?
thanks a lot for your help!!
Odd, I ran through few of my tests and did not run into the problem using the latest version of the script from 04/24/2010
I've just updated where the global configuration gets set, can download the latest version and give it a try. If you still continue to run into issues for whatever reason, can you provide a little background on the configuration you have setup? (e.g. options you're using and if this is on ESX or ESXi/etc.) - Please check out FAQ #1 if you have more questions.
Regarding the adapter, that has always been a required parameter, if you did not explicitly set it, it relies on the default which is buslogic. I'm assuming you haven't been modifying the script?
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Where is the -a "backup all VMs" option mentioned above? It does not seem to be in the actual ghettoVCB.sh:
./ghettoVCB.sh -a
./ghettoVCB.sh: line 729: usage: not found
There is no -a listed in options:
-f List of VMs to backup
-c Configuration directory for VM backups
-l File to output logging
-d Debug level info (default: info)
Ok forget this, the site must have served up an old version of the script - I have re-clicked and got the new version with -a.
Dear lamw:
sorry I didn't make it clear. maybe you don't use global configuration file, so you didn't encounter the error.
I use global cofiguration file to backup every vm. my backup command is "ghettoVCB.sh -f backup_list -g ghettoVCB.conf". with that config, the newest script will read global config at sequence below
line 145: reConfigureGhettoVCBConfiguration "$" line 279: logger "info" "CONFIG - USING GLOBAL GHETTOVCB CONFIGURATION FILE = $"
line 38: if ........... then
at line 38, LOG_TO_STDOUT is not exist yet, so it go to:
line 50: echo -e "$ -- $: $" >> "$" $ is not exist either, so script give out error message
I suggest maybe modify line 38 to check empty $ to prevent chick-egg problem.
and my ghettoVCB.conf:
DISK_BACKUP_FORMAT=2gbsparse
VM_BACKUP_DIR_NAMING_CONVENTION=image
VM_BACKUP_ROTATION_COUNT=1
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
SNAPSHOT_TIMEOUT=30
ENABLE_COMPRESSION=0
ADAPTER_FORMAT=lsilogic
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=1
ENABLE_NON_PERSISTENT_NFS=1
UNMOUNT_NFS=1
NFS_SERVER=10.1.1.1
NFS_MOUNT=/share/nfs
NFS_LOCAL_NAME=nfs_storage_backup
NFS_VM_BACKUP_DIR=backup
and about "adapter" type. old script didn't use "-a" when doing vmkfstools, it just respect the original adapter type. that's the behavior I want. because I just want my backup to use the same adapter type as original, no matter it is buslogic, lsilogic, or ide.
about modification, now I only modify the script a little to use "monosparse" instead of "2gbsparse".
I can live with that I think. it seems few people need "monosparse" backups..
thanks again for your kindly help!!
Okay, I've moved the output of using the global configuration further down into the script. All that output is used for is for me to know that someone is using a global conf and mainly around for troubelshooting. The fix should resolve the problem and if not, please let me know.
I've actually had requests about specifying the adapter type and probably was added in one of the subsequent release. It may have been in the very early version of the script that adapter type was not something you can specify.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi guys
I've got a new problem:
Failed to clone disk : The system cannot find the file specified (25)
Thats the log entry.
I've searched the web and found that if this issue occurs I have to take the spaces from the filenames.
So far so good, I have done this in every filename, .vmdk, .vmx , .vmxf but the error still occurs.
The VM boots up again it can still work but I cant take a backup.
What can I do?
Thanks for your replies
Regards
Dear lamw:
now the script works perfect for me. thanks again for your great help!!
Awesome, glad to hear!
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Please read FAQ #1
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I have seen no evidence that the "adapter type" setting has ever changed the adapter type on a backed up vm.
Anyone seen this do anything?
I do not actually want it to change but there seems to be a lot of confusion about this setting and it's effect.
Hi,
yesterday I tried the new version of ghettoVCB with the exclusion list feature. This worked for me on one of two servers. On that one where it did not worked the script tried to backup all VMs although I defined one VM not to backup.
What can be the reason for that problem?
One other problem I have on that server. It is an error I get for one of the VMs "2010-04-27 23:30:04 -- info: Error: failed to locate and extract VM_ID for ..." What can cause this error?
Are there any naming conventions for the VMs? I ask because we have names with "/" and "(...)"?
Thanks, Tom
Removing snapshot hangs:
Clone: 100% done.
2010-04-28 09:16:42 -- info: Removing snapshot from Web_TESTBOX6 ...
It should take about 10 seconds but I leave it for 20 minutes before quitting. I see this has already been reported several times. Is there any solution?
I take it that david pyer's solution above (387 $ vmsvc/snapshot.removeall $ > /dev/null 2>&1) will remove all snapshots rather than just the one made for backup?
Edit: Also, it would be nice if a single host backup failing like this didn't end the backup when using -a... if problems with backing up a single host were handled better so the script would continue on and still backup the other hosts. At the moment I am waiting an hour for a failure, and hosts following the ones that hangs are not being backed up.
This may be related to FAQ #18 and #29. Are you running ESXi and using and NFS datastore to backup your VMs? If you are in fact hitting these issues related to the "NFS" issue, there's not much that can be done since the backups do complete for the existing VM but something causes the script to hang and everything has pointed back to either the ESXi host or the NFS server.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I suspect it's most likely due to your naming convention for your VMs, perhaps the "/" is causing some issues. In general, I don't recommend using odd characters for your VM names. Even though Windows allows it, I prefer to use things like "-" or "_" or even maybe "." to separate out a name.
I would need to test to see if this is the case, but it should be trivial for you to test by properly renaming the VM not only the display name but the actual files backing the VM and re-run your backup. You can also try running this in dryrun mode and see if it's able to properly parse our your VM, I would expect that it may not show up in the dryrun as it's not able to search for the VM due to the special chars.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
GhettoVCB.sh hangs on one specific VM persistently when attempting to remove the snapshot. The weird thing is that this VM has snapshots and should not be being backed up anyway. VMX_DIR has:
# ls -l /vmfs/volumes/datastore4/TESTBOX6 -rw------- 1 root root 8589934592 Mar 11 17:38 TESTBOX5-000001-flat.vmdk -rw------- 1 root root 503 Mar 11 17:38 TESTBOX5-000001.vmdk -rw------- 1 root root 8589934592 Mar 11 17:38 TESTBOX5-000002-flat.vmdk -rw------- 1 root root 503 Mar 11 17:38 TESTBOX5-000002.vmdk -rw------- 1 root root 8589934592 Mar 11 17:33 TESTBOX5-000004-flat.vmdk -rw------- 1 root root 503 Mar 11 17:33 TESTBOX5-000004.vmdk -rw------- 1 root root 8589934592 Apr 29 08:45 TESTBOX5-000005-flat.vmdk -rw------- 1 root root 503 Apr 29 08:35 TESTBOX5-000005.vmdk -rw------- 1 root root 268435456 Mar 12 10:56 TESTBOX5-425ed04f.vswp -rw------- 1 root root 269643751 Mar 11 17:12 TESTBOX5-Snapshot7.vmsn -rw------- 1 root root 8589934592 Mar 11 16:54 TESTBOX5-flat.vmdk -rw------- 1 root root 8684 Apr 29 02:15 TESTBOX5.nvram -rw------- 1 root root 470 Mar 11 17:05 TESTBOX5.vmdk -rw------- 1 root root 2358 Apr 29 08:35 TESTBOX5.vmsd -rw------- 1 root root 3039 Apr 29 08:35 TESTBOX5.vmx -rw------- 1 root root 263 Apr 21 15:28 TESTBOX5.vmxf -rw------- 1 root root 63270 Mar 11 16:54 vmware-11.log -rw------- 1 root root 165654 Mar 11 16:54 vmware-12.log -rw------- 1 root root 105954 Mar 11 16:54 vmware-6.log -rw------- 1 root root 240822 Mar 11 16:54 vmware-7.log -rw------- 1 root root 62127 Mar 11 16:54 vmware-8.log -rw------- 1 root root 105384 Mar 11 16:54 vmware-9.log -rw-r--r-- 1 root root 309577 Apr 29 08:35 vmware.log
GhettoVCB.sh checks for a snapshot by using "grep -delta" but as you can see from the listing the snapshot does not have a -delta file. (If it helps, I think this VM was probably cloned from another, maybe using VMware Converter).
More generally, I am curious as to the technical reasons as to why snapshots should not be used long-term. For testing we use boxes which are snapshotted after an OS install, so we can install software over the top of it, test, and then revert. Also for testing we will have multiple product configs saved as snapshots derived from the same initial install. This enables quickly changing between different configs for faster testing. Is there some technical reason why this is a bad thing to do with VMware?
Hi William, you are right, the problem was the "()". I removed them and did a dryrun and it seems to work.
Thank you for that usefull hint!
So my personal stance on snapshots, is that it does have it's place but many times it's not properly understood and is abused as an easy way to "revert" back in time. The problem is many users don't understand the implication when a snapshot is created, especially on a live running VM and what happens to that snapshot as time goes on.
I would invite you take a look at the following links:
VMware KB - How do snapshots work?
The process & space required when committing/deleting multiple snapshots
Performance Impact when using VMware snapshots
The way VMware snapshots are implemented, they're really meant for short duration of time. Unless you're very clear on the changes and even then, you really need some solid monitoring on your VM's disk + datastore. If you have a VM that's been allocated to be 20GB and you take a snapshot while it runs, a new "delta" disk is created which starts out at 16MB, that's how much it grows. The original disk is now left in a "read-only" state and no longer grows. All changes going forward now will write to the delta disk, now lets say you do a bunch of changes and install new applications and start writing and you grow the disk ... this new "delta" can actually get up to the size of the original disk if you introduce huge amounts of change and let's say it gets to 15GB, we now take another snapshot. We now have a new delta disk that continues to grow/etc. You can see how easily w/o proper monitoring that you can take multiple snapshots and potentially fill up your datastore.
This example is just with one VM but you can see how bad this can be with bunch more VMs. The other piece of it, as deltas get larger, when you commit the changes, it also takes quite a bit of time an generates quite a bit of I/O on the backend which can impact performance. If you take a look at Duncan's article on how snapshot commit/delete are done, they require so much more additional space than the snapshot size as it requires to commit every snapshot before it actually deletes it.
So it's not that snapshots are bad thing, but its not well understood and generally users run into all sorts of problems when they start to use snapshots without understanding how they really work. I've seen several posting on the VMTN forums where users end up with 500GB or 1TB snapshots that grew for a year! and commits that took few days to a few weeks.
This is why I do not promote the use of snapshots for long durations of time, they have their place like you've mentioned for critical patches/updates. Heck even VMware's VUM utility allows you to snapshot a VM prior to patching and then removing the snapshot after x-days, but it's a temporarily thing and not mean to be long lived.
Now regarding your VM, I'm not sure what state it was in ... but usually when you properly clone a VM, at least from vCenter, it'll consolidate the snapshot to your destination (e.g. the newly cloned VM will won't have snapshots and will just carry the latest changes)
To verify if you truly have snapshots, you may want to go to vSphere Client and check the snapshot manager to see if it see's any snapshots. It's not uncommon that the vSphere Client may not see the snapshots but you still have them and also it's not uncommon to end up with orphaned snapshots. I'm not an expert in figuring out the whole snapshot tree and what links to what and what can be deleted ... but in generally ,if you're not sure. You should be able to create a new snapshot using the vSphere Client and then do a "delete all" and that should commit all the changes and hopefully clean up any leftovers. If there are still snapshot files, then they may actually be orphaned.
Hopefully this helps you understand how VMware snapshots work and their impact
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi lamw
i have posted my logoutput to pastebin.com
here is the link
Regards
Matthias
Hi William,
first I want say thank you for this great script. I´am using this now since two months and it works great!
With the new version I have only one problem, it does not recognize the VM_BACKUP_ROTATION_COUNT option. This option is set on 2 backups (VM_BACKUP_ROTATION_COUNT=2).
I saw today that I have 4 backups in the folders of my vmware appliances. The first one was created with an "older" version of ghettoVCB, so the naming is different (Servername-2010-04-26--1) and the other three are in the new naming scheme with the scheduled time of the backup (Servername-2010-04-27_20-00-01).
So the script does not delete the old backups. What can cause this problem?
Yes, this was a known bug that caused a space to be created within the output name. This has resolved in one of the updates, please manually delete the backup with the spaces or manually rename and download the new script and you should not run into this problem.
The latest version is always updated within the documentation and if you look at the title now, it includes the last revision date. All changes are documented in the change log, I would recommend that you take a look prior to posting to see if certain bugs/features have been added.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Could you also include a dryrun output as well? It's interesting that the errors is that it can't find the specified disks. You may also need to provide me your directory structure to this VM + .vmx file to compare, since that is where the script is pulling the paths to the VMDK(s).
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I´am using already the latest version of the script. I have downloaded this on monday the 26th and installed it after.
Hi lamw,
thanks for the fast reply.
Here is the link to pastbin.com
But now I have used the new version from your script.
Maybe I haven't got the problem (?!) but I can't test a real run yet!
On tuesday next week I can paste the real run log.
Regards
Actually there were two updates that day. The problem that you're referring to was fixed in the latest version, you can easily verify by greping out "date" and you'll see that there's a difference in the way the date is generated. You mentioned earlier you were using an old version of the script which created the "space" and that has been resolved, please download the latest version and let me know if you still run into the problems. I would also either delete OR update the current backups so they match the existing format, else the rotation will have issues.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
William,
Thank you for the detailed reply regarding snapshots.
I have another problem. VMs with whitespace in the VM name are not being removed during rotation. A fix diff follows:
--- ghettoVCB.sh.orig 2010-05-03 09:52:52.845261356 +0100 +++ ghettoVCB.sh 2010-05-03 10:07:25.342935259 +0100 @@ -390,6 +390,8 @@ LIST_BACKUPS=$(ls -t "${BACKUP_DIR_PATH}") BACKUPS_TO_KEEP=$(ls -t "${BACKUP_DIR_PATH}" | head -"${VM_BACKUP_ROTATION_COUNT}") + OLD_IFS=$IFS + IFS="$(echo -e "\n\r")" for i in ${LIST_BACKUPS}; do FOUND=0 @@ -405,6 +407,7 @@ rm -rf "$BACKUP_DIR_PATH/$i" fi done + IFS=$OLD_IFS } ghettoVCB() {
Thanks for reporting this, if you've read the documentation, you know my stance on using "spaces" in a name When you ran this test, was it on ESX or ESXi?
I'll get this updated tonight and post the new version.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi lamw,
now, with the actualized script the logoutput is only:
" 2010-05-04 09:01:03 -- debug: Failed to acquire lock, another instance of script may be running, giving up on /tmp/ghettoVCB.lock"
Are the vmdks locked?
what can I do?
Regards
As the message states:
another instance of script may be running
This is a new feature introduced which prevents multiple instances of the script launching. In the past this has bitten certain users who miss-configured their cron entry, this has nothing to do with VMDK locking
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I wrote a summarize script in AWK that summarizes the output log. Not sure anyone will find it helpful, but here's the script:
-
#!/bin/awk -f
/Initiate backup/ {
error="";
printf "%-20s ", $NF;
};
/Failed/ {
error=substr($0,match($0,"Failed"))
};
/Backup Duration/ {
printf "duration: %s %s", $(NF-1), $NF
};
/(Successfully|Error)/ {
if ($5 == "Successfully" && length(error) == 0)
printf "\tSUCCESS";
else
printf "\tFAILED";
if (length(error) > 0)
printf " : %s\n", error;
else
printf "\n"
};
/Snapshot found for .*, backup will not take place/ {
printf "%-20s no backup => has snapshot\tFAILED\n", substr($8, 1, length($8)-1)
};
-
When you run one of the ghetto backup log files through this awk script, you get this formatted output which I have a job email to me daily:
# ./summarize-esxi-log.sh logs/zeta-weekly-201005012332.log
delaware duration: 17.80 Minutes SUCCESS
connecticut duration: 33.57 Minutes SUCCESS
scrod duration: 10.70 Minutes SUCCESS
earth duration: 52.73 Minutes SUCCESS
uranus duration: 67.03 Minutes FAILED : Failed to clone disk : No space left on device (1835017).
georgia duration: 17.18 Minutes SUCCESS
pike duration: 34.17 Minutes SUCCESS
rattler duration: 15.50 Minutes FAILED
python duration: 15.55 Minutes FAILED
neptune duration: 20.47 Minutes SUCCESS
newjersey duration: 21.07 Minutes SUCCESS
I find it easier to quickly glance at this report and see if anything needs addressed.
Enjoy!
Hi William,
the problem still exists, also with the updated script the old backups will not be deleted.
What else can cause the problem?
Do you have spaces in your VM names? This was recently reported, but I'm still waiting for confirmation that it suggest fix is resolved prior to posting.
Could you provide a directory structure listing of the backup directory and post it here?
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi William,
yes we use spaces in the names. Sorry I did not read it before (maybe I did not understand well because english is not my native language).
I can´t give you a listing of the backup directory, because the names too much detailed, such like domain names and so on ... sorry.
That's okay, then you're running into the problem that one of the users reported earlier on. I'll post a fix shortly and you can verify if it resolves the problem.
Thanks
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Yes, spaces in names sometimes suck, but VMware allows it and I can't control what other people do.
The problem I ran into with VMs with spaces in the names not being removed was with esxi 4.0.
np. I've just updated the script and did a quick verification. Thanks for reporting the bug
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
You're command to check that crond is running doesn't seem to work on ESXi 4. But this alternative seems to work.
ps | grep "$(cat /var/run/crond.pid)"
Hi guys,
thanks for the great script. currently im having trouble with the latest script.
im running ghettovcb via cronjob on full esx with the following syntax:
00 1 * * 7 /root/ghettoVCB/ghettoVCB.sh -f /root/ghettoVCB/vms -d debug -l /tmp/ghettoVCB.log
the cronjob is starting the script successfully but not all vm's are getting backed up. it seems that the script is too fast with the backup? output of the logfile:
2010-05-06 11:46:05 -- info: Initiate backup for backup_hostname1
Destination disk format: VMFS zeroedthick
Cloning disk '/vmfs/volumes/vgdata01/backup_hostname1_3/backup_hostname1_1.vmdk'...
MClone: 0% done.MClone: 1% done.MClone: 2% done.MClone: 3% done.MClone: 4% done.MClone: 5% done.MClone: 6% done.MClone: 7% done.MClone: 8% done.MClone: 9% done.MClone: 10% done.MClone: 11% done.MClone: 12% done.MClone: 13% done.MClone: 14% done.MClone: 15% done.MClone: 16% done.MClone: 17% done.MClone: 18% done.MClone: 19% done.MClone: 20% done.MClone: 21% done.MClone: 22% done.MClone: 23% done.MClone: 24% done.MClone: 25% done.MClone: 26% done.MClone: 27% done.MClone: 28% done.MClone: 29% done.MClone: 30% done.MClone: 31% done.MClone: 32% done.MClone: 33% done.MClone: 34% done.MClone: 35% done.MClone: 36% done.MClone: 37% done.MClone: 38% done.MClone: 39% done.MClone: 40% done.MClone: 41% done.MClone: 42% done.MClone: 43% done.MClone: 44% done.MClone: 45% done.MClone: 46% done.MClone: 47% done.MClone: 48% done.MClone: 49% done.MClone: 50% done.MClone: 51% done.MClone: 52% done.MClone: 53% done.MClone: 54% done.MClone: 55% done.MClone: 56% done.MClone: 57% done.MClone: 58% done.MClone: 59% done.MClone: 60% done.MClone: 61% done.MClone: 62% done.MClone: 63% done.MClone: 64% done.MClone: 65% done.MClone: 66% done.MClone: 67% done.MClone: 68% done.MClone: 69% done.MClone: 70% done.MClone: 71% done.MClone: 72% done.MClone: 73% done.MClone: 74% done.MClone: 75% done.MClone: 76% done.MClone: 77% done.MClone: 78% done.MClone: 79% done.MClone: 80% done.MClone: 81% done.MClone: 82% done.MClone: 83% done.MClone: 84% done.MClone: 85% done.MClone: 86% done.MClone: 87% done.MClone: 88% done.MClone: 89% done.MClone: 90% done.MClone: 91% done.MClone: 92% done.MClone: 93% done.MClone: 94% done.MClone: 95% done.MClone: 96% done.MClone: 97% done.MClone: 98% done.MClone: 99% done.^MClone: 100% done.
Destination disk format: VMFS zeroedthick
Cloning disk '/vmfs/volumes/vgdata01/backup_hostname1_3/backup_hostname1.vmdk'...
2010-05-06 13:30:08 -- info: Backup Duration: 104.05 Minutes
2010-05-06 13:30:08 -- info: Successfully completed backup for backup_hostname1!
the other ones:
Cloning disk '/vmfs/volumes/vgdata01/backup_hostname6/backup_hostname6_1.vmdk'...
^MClone: 0% done.2010-05-06 13:35:48 -- info: Backup Duration: 5.63 Minutes
2010-05-06 13:35:48 -- info: Successfully completed backup for backup_hostname6!
2010-05-06 13:35:51 -- info: Initiate backup for backup_hostname2
2010-05-06 13:36:01 -- info: Backup Duration: 10 Seconds
2010-05-06 13:36:01 -- info: Successfully completed backup for backup_hostname2!
2010-05-06 13:36:04 -- info: Initiate backup for backup_hostname3
2010-05-06 13:36:05 -- info: Backup Duration: 1 Seconds
2010-05-06 13:36:05 -- info: Successfully completed backup for backup_hostname3!
2010-05-06 13:36:06 -- info: Initiate backup for backup_hostname4
2010-05-06 13:36:12 -- info: Backup Duration: 6 Seconds
2010-05-06 13:36:12 -- info: Successfully completed backup for backup_hostname4!
2010-05-06 13:36:15 -- info: Initiate backup for backup_hostname5
2010-05-06 13:36:20 -- info: Backup Duration: 5 Seconds
2010-05-06 13:36:20 -- info: Successfully completed backup for backup_hostname5!
the backup of the other is not completed, for example backup_hostname6 has approx. 600gb.
does anyone know what is happening here?
thanks for help!
Hello all
I've got a strange Problem with the new version. My Backup's are taken perfectly. But after the backups are finished, not only the snapshots are deletet but also the actual backup directory with the newest backups.
The log file (debug) shows the following interresting lines. Please hava a look at the "Naming Convention" and you will see exactly the directory with this name is beeing deletet at the last line...:
2010-05-07 23:26:01 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/Second_1TB_HD/Backup
2010-05-07 23:26:01 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 0
2010-05-07 23:26:01 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2010-05-07_23-26-01
...
...
2010-05-08 01:54:42 -- debug: Removing /vmfs/volumes/Second_1TB_HD/Backup/Win_2008_Server_PH_1/Win_2008_Server_PH_1-2010-05-07_23-26-01
Any ideas?
Thank you, ibhp