Dear Team,
What is Multipath relax? When do we have to enable the same.?
Thank you in advance.
If you need ECMP support eBGP neighbors in different AS numbers. Kindly refer NSX design document, most of your queries are very well explained in design documents.
https://nsx.techzone.vmware.com/resource/nsx-t-reference-design-guide-3-0#_Toc21330324
for every question, always one replay = read the manual
In case the multiple parallel paths won’t be the same AS path, then normally one as path will get into your routing table. In case if you wish to have both AS path routes in your routing table in such a case to install two parallel paths from BGP in the routing table you can use the BGP feature "multipath relax”.