VMware 6.7 ESXI 6.7
I just migrated three VM's from a Datastore Cluster NSF Datastores to internal Datastores to the ESXi hosts.
I need to shutdown the NFS devices for moving to a new Rack.
All VMs are running fine.
I wanted to migrate the three VMs back to the Datastore cluster. But when selecting the datastores The DataStore cluster devices do not show as available.
So I guess this is two questions.
1. How can I migrate them back to the Datastore cluster from the internal datastores.
2. How can I make the internal datastores part of the Datastore cluster.? I tried that and I got this error The operation is not supported on the object.
Any ideas
Thank you
Tom
There are supported drives and supported RAID controllers, and supported systems called vSAN ReadyNodes.
This should help: VMware Compatibility Guide - vsan
Update
I was able to Move the VMs to my NFS storage I needed to uncheck the Disable Storage DRS for this virtual machine then all Datastores appeared
So now I only need to understand how to make my internal drives part of the Datastore Cluster or create another Data Store Cluster?
Thanks
Tom
You can’t mix NFS and VMFS datastores in the same cluster: Datastore Cluster Requirements
Scott
Thanks for the info
All my internal Disks are VMFS 6
I could make new Datastore Cluster with all them
I have 4 Hosts in my DataCenter Cluster so all those drives can make up the New Datastore Cluster correct?
I see when I select the internal disk this warning Host connections missing
Any ideas?
Thank you
Tom
Your local datastores are not “shared”, they are only accessible by the host on which they reside.
If you want to “cluster” local storage, that’s vSAN: What is VMware vSAN? | Virtual SAN | VMware
Scott
I tried Vsan in the past and it crashed the ESXI host as soon and something that tried to access the vsan
Thousands of customers use it successfully, there must have been something specific about your setup - there are specific requirements which must be met.
As Scott said, you cannot put local data stores in a cluster. They aren't shared resources, so that's not how it works. Regarding your vSAN experiences: you don't just simply flick it on. It has its own set of requirements and practices. If you didn't adhere to them then that's why.
Guys
Thanks for the information I will try vsan again
Is there a doc available to requirements and setup?
Thank you
Tom
Yes, the official docs. Don't "try it again"u you've verified you meet all the requirements. Just because you can run vSphere doesn't mean you can run vSAN. Different product with different compatibility requirements.
I know
But looking for the Documentation for requirements and setup Where? I found it on the VMware Docs site
I have 8 Dell PowerEdge R430 8 processors 128 GB Ram Gen 11
Each has 4 internal drives 1 SSD drive 128 GB and 3 Sata 4 GB drives The SSD is need for Vsan Cache correct?
I have two VCenters running HA DRS etc.
Each vCenter has a Datacenter and a Cluster configured
I have a Vsan Network setup
I believe I meet the requirements Do you have any thoughts
Thank you
Tom
There are supported drives and supported RAID controllers, and supported systems called vSAN ReadyNodes.
This should help: VMware Compatibility Guide - vsan
Scott
Thanks for the info
Looks like I may need to upgrade my CPU's on the hosts. I only have 4 Cores and 8 Logical CPU's
With 128 GB of Ram looks like to chart requires I have 16 CORES
Contacting my Vender now to see the upgrade path.
Thanks again.