I'm am little confused and perhaps someone can help me understand.
I have managed to configure Vlans on the HP switch, for the Service Console and Vmotion, and server vlan (where all current servers reside)
I have new set of virtual servers, that need to be in a separate vlan from the server vlan, however will be using the same nics.
How will this work??
You can set VLANs to portgroups, not only for vSwitches. Add a second VM portgroup to your vSwitch (where VMs are now connected) and configure a specific VLAN for each of the portgroups.
Marcelo Soares
VMWare Certified Professional 310/410
Virtualization Tech Master
Globant Argentina
Consider awarding points for "helpful" and/or "correct" answers.
Hi,
this is a simple task.
Configure the physical switch port where the physical nic of the esx(i) host is connected in trunk mode. Then configure a new/old portgroup with the needed VLAN ID that is connected to a vSwitch that is connected to the physical nic i just commented before.
Now the vm's associated to this new portgroup would be working in the pertinent vlan with vlan tagging. The vlan tagging is done at the esx(i) level.
Just remember to be careful if the service console is connected to the same physical nic that this new portgroup. Then the service console portgroup must be using vlan tagging too. If you don't configure it in the right way, you will lost administration access to the esx(i) host and some weird issues can happens.
Anyway the best way (secure & easy) is that this new portgroup is connected to a diferent physical nic that the esx(i) service console. Then the service console (and all related stuff) never will be affected with this new portgroup configurations.
Hope this helps you
Regards/Saludos,
Pablo
Please consider awarding any helpful answer. Thanks!! - Por favor considera premiar las respuestas útiles. ¡¡Muchas gracias!!
Create new VLAN in pSwitch
Add pSwitch port connected to same vmnic as a member to your new VLAN too
If you're using HP Pro-curve, you can set this port PVID equal to "1" (native vlan)
Create new port group and set VLAN ID equal to your new created VLAN ID in pSwitch & you should be ok after that
vcbMC-1.0.6 Beta
vcbMC-1.0.7 Lite