Hello,
I am trying to connect a customer t1 gateway to an mpls link going to his office.
To achieve this, i tried to add a service interface to the customer T1 gateway. This service interface is connected to a vlan backed segment connected to the customer office.
From my org VDC, i can ping the service interface IP of the T1 gateway but I cannot go further. I cannot reach the other end (customer office). I deployed a router sitting on the vlan backed segment but this router cannot ping the T1 gateway either. It is like the service interface is not really connected to the vlan backed segment because there is no communication between the T1 gateway and the rest of the segment.
Any idea?
NSX-T 3.2 & VCD 10.3
Most likely you are missing static routes on T1. Please note that this design is supported with 10.4.1 version
It is a connected subnet on the T1, so not sure why i would need static route?
Design is supported for 10.4.1 from tenant side but we should be able to do the config from the NSX manager no matter the VCD version?