Hi
I have configured network load balancing with 2 interfaces in vSphere Client.
On managed HP ProCurve switch I have configured the following:
HP_Core(config)# trunk A21,A22 Trk1
for these interfaces connected to ESXi 5.5.
Are these settings correct?
This article explains in detail how to configure port channels on the ESXi and the HP switch side:
Try "trunk A21,A22 trk1 Trunk" and then make sure your VLANs are configured as tagged / unstaffed on trk1 as appropriate. Tagged if you are sending more than one.
i Think you can check with show trunk.
This article explains in detail how to configure port channels on the ESXi and the HP switch side:
This article explains in detail how to configure port channels on the ESXi and the HP switch side:
Thx, but is it possible to configure static port channel on 3 physical interfaces from ESXi Server?
Thx, but is it possible to configure static port channel on 3 physical interfaces from ESXi Server?
Yes, you can have 3 or more physical NICs in a channel.